Re: IPW2200 modo monitor no funciona pero el firmware y drive son correctos !
On 2/21/06, Iñigo Tejedor Arrondo <txiuaua@telefonica.net> wrote:
> El lun, 20-02-2006 a las 22:22 -0300, Javier Rodríguez Ruiz escribió:
> > hola, primero que todo se que este tema esta bien comentado en algunos
> > foros pero no logro pillar el problema, esta vez es distinto.....
> >
> >
> > ===========================
> > -> notebook: dell inspiron 700m
> >
> >
> > -> S.O.: debian inestable
> >
> >
> > -> kernel: 2.6.15-1-686
> >
> >
> > -> driver:
> > Update version ipw2200 stamp to 1.0.8
> > Updated firmware version stamp to 2.4 from 2.3 so it will use the
> > latest firmware.
> > You can obtain the firmware at http://ipw2200.sf.net/firmware.php
> >
> > ( eso sale en el change.log del kernel 2.6.15)
> > http://kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.15
> > por lotanto el driver si soporta modo monitor
> >
>
> Creo que el driver que lleva el kernel, necesita el firmware anterior.
> Si quieres usar ese, recompila el kernel deshabilitando el driver y
> luego compila a parte el módulo con la versión 1.0.8 a ver si funciona.
>
>
> >
> > -> firmware
> > ls -la /usr/lib/hotplug/firmware/
> > total 584
> > drwxr-xr-x 2 root root 4096 2006-02-07 22:04 .
> > drwxr-xr-x 3 root root 4096 2005-12-29 00:17 ..
> > -rw-r--r-- 1 root root 6472 2006-02-07 22:04 ipw-2.4-boot.fw
> > -rw-r--r-- 1 root root 168344 2006-02-07 22:04 ipw-2.4-bss.fw
> > -rw-r--r-- 1 root root 16334 2006-02-07 22:04 ipw-2.4-bss_ucode.fw
> > -rw-r--r-- 1 root root 162884 2006-02-07 22:04 ipw-2.4-ibss.fw
> > -rw-r--r-- 1 root root 16312 2006-02-07 22:04 ipw-2.4-ibss_ucode.fw
> > -rw-r--r-- 1 root root 168344 2006-02-07 22:04 ipw-2.4-sniffer.fw
> > -rw-r--r-- 1 root root 16344 2006-02-07 22:04 ipw-2.4-sniffer_ucode.fw
> > -rwxr-xr-x 1 root root 12007 2006-02-07 22:04 LICENSE
> > ==================
> >
> > la tarjeta en modo normal funciona perfectamente el linux
> > esta bien instalada no da niun error.....
> >
> >
> > dmesg |grep ipw2200
> > ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.0.8
> > ipw2200: Copyright(c) 2003-2005 Intel Corporation
> > ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
> >
> >
> > lsmod |grep ipw2200
> > ipw2200 96236 0
> > ieee80211 29064 1 ipw2200
> > firmware_class 9696 2 ipw2200,pcmcia
> >
> >
> > solo q cuando quiero poner en modo monitor
> >
> > florencia:/etc# iwconfig eth2 mode Monitor
> > Error for wireless request "Set Mode" (8B06) :
> > SET failed on device eth2 ; Invalid argument.
> >
> > alguien alguna idea???
> >
> > =================================
> > dato quizas curioso o quizas el problema!, si pongo 'modprobe ipw2200'
> > la instala y funciona pero al momento de iniciar linux sale un error
> >
> > Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.0.8
> > Copyright(c) 2003-2005 Intel Corporation
> > Detected Intel PRO/Wireless 2200BG Network Connection
> > ipw-2.4-boot.fw load failed: Reason -2
> > Unable to load firmware: -2
> > failed to register network device
> > probe of 0000:02:01.0 failed with error -5
> >
> > pero tras varias pruebas! puse a ipw2200 en el blacklist de modprobe y
> > la tarjeta funciona genial, la ignora y despues la instala no tengo muy
> > claro por que a instala pero creo que udev es el que la instala.....
> > ==========================
> >
> >
> >
> >
> > ayuda? porfavor ..... GRACIAS
> >
> >
> >
> >
> >
> >
>
>
> --
> To UNSUBSCRIBE, email to debian-user-spanish-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
Si usas los drivers del kernel vas a tener problemas, bajate las
sources del stack ieee80211 y el driver y firmware actuales, el modo
monitor va de perlas con eso :)
iwconfig eth1 mode monitor
eth1 unassociated ESSID:off/any
Mode:Monitor Channel=0 Access Point: Not-Associated
Bit Rate=0 kb/s Tx-Power=20 dBm
Retry limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:3 Missed beacon:0
Intentalo que es facilito :)
--
"... may the source be with you..."
Reply to: