[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: settings de red ok, pero sin acceso a red, ni ping...



El Mar 08 Nov 2005 21:23, Sergio Campos (aka Kaiowa) escribió:
> Buenas,
>
> ya estoy totalmente desesperado. Acabo de cambiar de un sobremesa a
> un portatil y al configurar la red exactamente igual a como lo
> tenia en el sobremesa no tengo red, no me responde a ningun equipo
> de la red, ni ping ni na.
>
>
>
> /interfaces
>
> auto lo
> iface lo inet loopback
> auto	eth0
> iface eth0 inet static
> address 192.168.1.10
> netmask 255.255.255.0
> gateway 192.168.1.1
> name Tred
> broadcast 192.168.1.255
> network 192.168.1.0
>
> /resolv.conf
> nameserver 62.81.0.35
> nameserver 82.81.16.135
> domain kaiowa
>
>
>
>
> ------------ifconfig ----------------
> root@kaiowa:/home/kaiowa# ifconfig
> eth0      Link encap:UNSPEC  HWaddr
> 00-40-D0-01-00-32-B1-91-00-00-00-00-00-00-00-00
>           inet addr:192.168.1.10  Bcast:192.168.1.255 
> Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST  MTU:1500 
> Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX
> packets:58 errors:0 dropped:0 overruns:0 carrier:0 collisions:0
> txqueuelen:1000
>           RX bytes:0 (0.0 b)  TX bytes:5284 (5.1 KiB)
>
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           inet6 addr: ::1/128 Scope:Host
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>           RX packets:11733 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:11733 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:859854 (839.7 KiB)  TX bytes:859854 (839.7 KiB)
>
>
> ----------------- route ---------------
> root@kaiowa:/home/kaiowa# route
> Kernel IP routing table
> Destination     Gateway         Genmask         Flags Metric Ref   
> Use Iface 192.168.1.0     *               255.255.255.0   U     0  
>    0        0 eth0
>
>
>
>
> es normal que en RX paquets tenga 0?
>
>
> he probado por dhcp y me se asigna correctamente la ip y las dns
> pero luego me pasa lo mismo.
>
>
> ¿Alguna ayuda plz?
>
>
>
>

Sergio,

si la portatil tiene red inalámbrica probar usar eth1 en vez de eth0



Reply to: