Re: problemas con touchopad
Si
On 13/07/05, Jose Luis Garcia <aluete@gmail.com> wrote:
> No he instalado synaptics, ¿es necesario?
>
> On 7/13/05, Luis Pérez <listas.tontas@gmail.com> wrote:
> > Lo tienes mal.
> > Section "InputDevice"
> > Identifier "Touchpad"
> > Driver "synaptics"
> > Option "CorePointer"
> > Option "Device" "/dev/input/event1"
> > Option "Protocol" "event"
> > Option "LeftEdge" "1700"
> > Option "RightEdge" "5300"
> > Option "TopEdge" "1700"
> > Option "BottomEdge" "4200"
> > Option "FingerLow" "25"
> > Option "FingerHigh" "30"
> > Option "MaxTapTime" "180"
> > Option "MaxTapMove" "220"
> > Option "VertScrollDelta" "100"
> > Option "MinSpeed" "0.06"
> > Option "MaxSpeed" "0.12"
> > Option "AccelFactor" "0.0010"
> > EndSection
> > Tienes que ver que /dev/input/event* es el touchpad.
> > haces cat /dev/input/event0 y te pones a tocar el touchpad, si salen
> > muchas lineas es event0 si no prueba con event1...
> > Tambien tienes que tener en el kernel:
> > evdev + Event interface support
> >
> > On 13/07/05, Rodrigo Ramírez <decipher@chile.com> wrote:
> > > Instalaste xfree86-driver-synaptics ?
> > >
> > >
> > > En mi configuración del /etc/X11/XF86Config-4 tengo,
> > >
> > >
> > > Section "InputDevice"
> > > Driver "synaptics"
> > > Identifier "Mouse[1]"
> > > Option "Device" "/dev/psaux"
> > > Option "Protocol" "auto-dev"
> > > Option "LeftEdge" "1700"
> > > Option "RightEdge" "5300"
> > > Option "TopEdge" "1700"
> > > Option "BottomEdge" "4200"
> > > Option "FingerLow" "25"
> > > Option "FingerHigh" "30"
> > > Option "MaxTapTime" "180"
> > > Option "MaxTapMove" "220"
> > > Option "VertScrollDelta" "100"
> > > Option "MinSpeed" "0.06"
> > > Option "MaxSpeed" "0.12"
> > > Option "AccelFactor" "0.0010"
> > > # Option "SHMConfig" "on"
> > > # Option "Repeater" "/dev/ps2mouse"
> > > EndSection
> > >
> > >
> > >
> > > Luego
> > >
> > > Section "InputDevice"
> > > Identifier "Configured Mouse"
> > > Driver "mouse"
> > > Option "CorePointer"
> > > Option "Device" "/dev/psaux"
> > > Option "Protocol" "PS/2"
> > > Option "Emulate3Buttons" "true"
> > > Option "ZAxisMapping" "4 5"
> > > EndSection
> > > Section "InputDevice"
> > > Identifier "Generic Mouse"
> > > Driver "mouse"
> > > Option "SendCoreEvents" "true"
> > > Option "Device" "/dev/input/mice"
> > > Option "Protocol" "ImPS/2"
> > > Option "Emulate3Buttons" "true"
> > > Option "ZAxisMapping" "4 5"
> > > EndSection
> > >
> > >
> > > Section "ServerLayout"
> > > Identifier "Default Layout"
> > > Screen "Default Screen"
> > > InputDevice "Generic Keyboard"
> > > InputDevice "Mouse[1]" "CorePointer"
> > > InputDevice "Configured Mouse"
> > > InputDevice "Generic Mouse"
> > > EndSection
> > >
> > >
> > >
> > >
> > > Saludos,
> > >
> > >
> > > El mié, 13-07-2005 a las 09:01 +0200, Jose Luis Garcia escribió:
> > > > Hola,
> > > >
> > > > esta vez escribo para ver si alguien tiene solución a mi problema.
> > > > tengo instalada SARGE en el portatil, se ha configurado todo
> > > > correctamente, pero no me funciona el touchpad, si pincho un ratón en
> > > > el usb, lo detecta y funciona perfectamente. Que problema existe con
> > > > el touchpad, ¿como puedo activarlo?
> > > >
> > > >
> > > > Gracias
> > > >
> > >
> > >
> > >
> > > --
> > > Decipher.-
> > > Usuario #360238 counter.li.org
> > > http://www.linuxchillan.cl
> > >
> > >
> >
> >
>
Reply to: