[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Problema con NVIDIA, pero este si es raro...



Abre  /etc/X11/XF86Config-4 y mira que en "Section device"  ponga:
Driver "nvidia"

Si lo pone, si que lo estas usando y te deberia salir una pantalla de
nVidia al arrancar las X (esto se puede quitar con una opcion). si
quieres usar mas particularidades de la tarjeta como TwinView (si lo
soporta) o cosas semejante. Mirate el leeme de nVidia con la lista de
opciones.

Saludos

El 24/06/05, "Martínez Liébana, Manuel"<mmliebana@bancozaragozano.es> escribió:
> > El jue, 23-06-2005 a las 16:41 -0400, AleXerTecH escribió:
> > > En teoria, si instalo los drivers de nvidia con el .run y activo el
> > > modulo con el xfree deberia activarse todo lo demas verdad???
> > >
> > > No hay mas nada por hacer?
> > >
> > > Saludos!!!
> >
> > Vamos a ver...
> >
> > En el archivo /etc/X11/XF86Config-4 tienes que comentar (poner un '#'
> > delante) los siguientes parámetros en la "Section Module":
> >
> > # load GLcore
> > # load dri
> >
> > Y en la "Section device" tienes que escribir esto:
> >
> > Driver "nvidia"
> > Option "UseFBDev" "true"
> >
> > Con eso ya puedes empezar a utilizar tu tarjeta como Tux manda :)
> >
> > Saludos!
> >
> >
>         Hola a todos,
> 
>         A ver, esto me plantea una cuestion, yo tengo la misma tarjeta, hice
> una instalación de Sarge desde 0 con los DVDs y no he tenido ningún problema
> con la tarjeta. Va de muerte. Este hilo me plantea la duda de si realmente
> estoy utilizando la funcionalidad de la tarjeta o si por el contrario la
> toma como vga estandar. Como puedo saber esto?
> 
>         Saludos.
> ----------------------------------------------------------------------------
> ----------------------------------------------------------------------------
> ------------------------------------
> La información contenida en este correo electrónico es privada y
> confidencial. Cualquier uso, modificación, difusión y/o reproducción por
> parte de cualquier persona distinta del destinatario está prohibida. Si Vd.
> recibe este mensaje por error, por favor bórrelo y comuníquelo al remitente.
> ----------------------------------------------------------------------------
> ----------------------------------------------------------------------------
> ------------------------------------
> 
> This e-mail and any attachments are confidential and intended solely
> for the addressee and may also be privileged or exempt from disclosure
> under applicable law. If you are not the addressee, or have received
> this e-mail in error, please notify the sender immediately, delete it
> from your system and do not copy, disclose or otherwise act upon any
> part of this e-mail or its attachments..
> 
> Internet communications are not guaranteed to be secure or virus-free.
> The Barclays Group does not accept responsibility for any loss arising
> from unauthorised access to, or interference with, any Internet
> communications by any third party, or from the transmission of any
> viruses. Replies to this e-mail may be monitored by the Barclays
> Group for operational or business reasons..
> 
> Any opinion or other information in this e-mail or its attachments
> that does not relate to the business of the Barclays Group is personal
> to the sender and is not given or endorsed by the Barclays Group.
> 
> Barclays Bank PLC.Registered in England and Wales (registered no. 1026167).
> Registered Office: 1 Churchill Place, London, E14 5HP, United Kingdom.
> 
> Barclays Bank PLC is authorised and regulated by the Financial Services Authority.
> 
> 


-- 
***************************************************
Roberto Muñoz Gómez	   NIA: 100039318
Ingeniería Informatica
Universidad Carlos III de Madrid (España)
***************************************************
Linux User Number 364964



Reply to: