Re: Sarge no reconoce memoria flash USB
Gracias mario, efectivamente en el dmesg sale error, es el siguiente:
*************
usb 4-6: new high speed USB device using address 3
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Kingston Model: DataTraveler 2.0 Rev: 6.00
Type: Direct-Access ANSI SCSI revision: 02
USB Mass Storage device found at 3
SCSI device sda: 1001472 512-byte hdwr sectors (513 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: [CUMANA/ADFS] p1<5>Attached scsi
removable disk sda at scsi0, channel 0, id 0, lun 0
Buffer I/O error on device sda1, logical block 508378384
Buffer I/O error on device sda1, logical block 508378385
Buffer I/O error on device sda1, logical block 508378386
Buffer I/O error on device sda1, logical block 508378387
Buffer I/O error on device sda1, logical block 508378388
Buffer I/O error on device sda1, logical block 508378389
Buffer I/O error on device sda1, logical block 508378390
Buffer I/O error on device sda1, logical block 508378391
Buffer I/O error on device sda1, logical block 508378392
Buffer I/O error on device sda1, logical block 508378393
Buffer I/O error on device sda1, logical block 508378394
Buffer I/O error on device sda1, logical block 508378395
Buffer I/O error on device sda1, logical block 508378396
Buffer I/O error on device sda1, logical block 508378397
Buffer I/O error on device sda1, logical block 508378398
Buffer I/O error on device sda1, logical block 508378399
Buffer I/O error on device sda1, logical block 508378384
FAT: invalid media value (0xb9)
VFS: Can't find a valid FAT filesystem on dev sda1.
FAT: invalid media value (0xb9)
VFS: Can't find a valid FAT filesystem on dev sda.
FAT: invalid media value (0xb9)
VFS: Can't find a valid FAT filesystem on dev sda.
autofs: called with bogus options
FAT: invalid media value (0xb9)
VFS: Can't find a valid FAT filesystem on dev sda1.
autofs: called with bogus options
*************************************
que puedo hacer para solucionar esto
On 5/19/05, mario <debian@estilorural.com> wrote:
> El jue, 19-05-2005 a las 11:56 -0500, Herwin Huillcen escribió:
> > Saludos amigos.
> >
> > Resulta que acabo de instalar debian sarge con kernel 2.6.8 en una
> > maquina P IV, todo esta bie, pero no se porque no reconoce mi memoria
> > flash USB, es una KINGSTON de 512 MB.
> >
> > yo se que se necesitael modulo usb-storage, hot-plug, uhci, usbcore
> > como ustdes puede ver, la dar "lsmod" sale lo siguiente:
> >
> > ****************
> > debian:/etc# lsmod
> > Module Size Used by
>
> > ehci_hcd 27908 0
> > uhci_hcd 29328 0
>
> > vfat 13184 1
> > fat 41792 1 vfat
>
> > scsi_mod 115148 1 usb_storage
>
> > usbcore 104164 6 ehci_hcd,uhci_hcd,usb_storage,ndiswrapper
>
> con haber puesto estos módulos valía....
>
> ¿que dice dmesg después de enchufar el pendrive?
>
>
> --
> To UNSUBSCRIBE, email to debian-user-spanish-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
Reply to: