lilo y winxp

No veo el menu para seleccionar el otro sistema
operativopara saber si hice lo correcto aqui esta mi
lilo.conf
---------------------------------------------------
# /etc/lilo.conf - See: `lilo(8)' and `lilo.conf(5)',
# --------------- `install-mbr(8)',
`/usr/share/doc/lilo/',
# and `/usr/share/doc/mbr/'.

#
+---------------------------------------------------------------+
# | !! Reminder !! |
# | |
# | Don't forget to run `lilo' after you make changes
to this |
# | conffile, `/boot/bootmess.txt', or install a new
kernel. The |
# | computer will most likely fail to boot if a
kernel-image |
# | post-install script or you don't remember to run
`lilo'. |
# | |
#
+---------------------------------------------------------------+

# Support LBA for large hard disks.
#
lba32

# Overrides the default mapping between harddisk names
and the BIOS'
# harddisk order. Use with caution.
#disk=/dev/hde
# bios=0x81

#disk=/dev/sda
# bios=0x80

# Specifies the boot device. This is where Lilo
installs its boot
# block. It can be either a partition, or the raw
device, in which
# case it installs in the MBR, and will overwrite the
current MBR.
#
boot=/dev/hda

# Specifies the device that should be mounted as root.
(`/')
#
root=/dev/hda1

# Enable map compaction:
# Tries to merge read requests for adjacent sectors
into a single
# read request. This drastically reduces load time and
keeps the
# map smaller. Using `compact' is especially
recommended when
# booting from a floppy disk. It is disabled here by
default
# because it doesn't always work.
#
# compact

# Installs the specified file as the new boot sector
# You have the choice between: bmp, compat, menu and
text
# Look in /boot/ and in lilo.conf(5) manpage for
details
#
install=/boot/boot-menu.b

# Specifies the location of the map file
#
map=/boot/map

# You can set a password here, and uncomment the
`restricted' lines
# in the image definitions below to make it so that a
password must
# be typed to boot anything but a default
configuration. If a
# command line is given, other than one specified by
an `append'
# statement in `lilo.conf', the password will be
required, but a
# standard default boot will not require one.
#
# This will, for instance, prevent anyone with access
to the
# console from booting with something like `Linux
init=/bin/sh',
# and thus becoming `root' without proper
authorization.
#
# Note that if you really need this type of security,
you will
# likely also want to use `install-mbr' to reconfigure
the MBR
# program, as well as set up your BIOS to disallow
booting from
# removable disk or CD-ROM, then put a password on
getting into the
# BIOS configuration as well. Please RTFM
`install-mbr(8)'.
#
# password=tatercounter2000

# Specifies the number of deciseconds (0.1 seconds)
LILO should
# wait before booting the first image.
#
delay=120

# You can put a customized boot message up if you
like. If you use
# `prompt', and this computer may need to reboot
unattended, you
# must specify a `timeout', or it will sit there
forever waiting
# for a keypress. `single-key' goes with the `alias'
lines in the
# `image' configurations below. eg: You can press `1'
to boot
# `Linux', `2' to boot `LinuxOLD', if you uncomment
the `alias'.
#

# message=/boot/bootmess.txt
# prompt
# single-key
# delay=100
# timeout=100

# Specifies the VGA text mode at boot time. (normal,
extended, ask, <mode>)
#
# vga=ask
# vga=9
#
vga=normal

# Kernel command line options that apply to all
installed images go
# here. See: The `boot-prompt-HOWO' and
`kernel-parameters.txt' in
# the Linux kernel `Documentation' directory.
#
# append=""

# Boot up Linux by default.
#
default=Linux

image=/vmlinuz
label=Linux
read-only
# restricted
# alias=1

image=/vmlinuz.old
label=LinuxOLD
read-only
optional
# restricted
# alias=2

# If you have another OS on this machine to boot, you
can uncomment the
# following lines, changing the device name on the
`other' line to
# where your other OS' partition is.
#
other=/dev/hdb1
label=WinXp
table=/dev/hdb
boot-as=0x80

consultas:
table=/dev/hdb corresponde a que disco esta instalado
el Xp no?
y /dev/hdb1 corresponde en que particion esta
instalado?
SI TENGO INSTALADO DOS WINDOWS 98 Y XP LILO QUE
DEBERIA MOSTRARME EL NTLOARDER? O SOLO INgRESO EN
FORMA INDIVIDUAL A CADA UNO DE ELLOS? ES DECIR TENGO
QUE COLOCAR LINEAS ADICIONALES? GRACIAS A QUIEN ME
PUEDA AYUDAR ;-)

linuxcero novato