RE: Driver placa de red
Creo que los drivers de esa tarjeta estan en el Kernel 2.4.x, puede ser una
buena idea bajarte las fuentes y recompilar un nuevo kernel e incluir de
paso el soporte a tu tarjeta de red. Veo que utilizas el kernel que viene
por defecto en la instalacion.
Fredfoam
-----Mensaje original-----
De: Diego A. Gomez [mailto:dialgom@yahoo.com]
Enviado el: jueves, 30 de septiembre de 2004 1:01
Para: Lista Debian
Asunto: Re: Driver placa de red
--- Fernando Cosso <fernandocosso@arlinkbbt.com.ar> wrote:
> (.....)
> les agradeceria q alguien me de los "pasos" para
> compilar los drivers para debian 3.0 r2 kernel 2.4.18bf2.4, ya que en el
> txt que viene con la placa explica todo menos eso. Gracias y saludos.
> este es el txt que viene con la placa:
>
> **
> **
> ** VIA Rhine Family Fast Ethernet Adapter
> **
> ** Linux Driver
> **
> ** v4.22 Aug. 2002
> **
> **
>
> (...)
> Installation
> ============
> Please enter the following commands at the UNIX prompt. Remember,
> UNIX is
> case sensitive.
>
> 1) Create a temporary directory:
> mkdir /temp
>
> 2) Change to the temporary directory:
> cd /temp
>
> 2) Copy driver (rhinefet.tgz) from DOS disk, (mcopy below is one
> tool in
> mtools, if you didn't install mtools, you can type
> 'mount -t msdos /dev/fd0 /mnt' and use 'cp /mnt/rhinefet.tgz
> /temp'
> command to copy the driver to the temporary directory):
> mcopy a:rhinefet.tgz .
>
> 3) untar the archive file:
>
> tar xzvf rhinefet.tgz
> cd rhinefet
>
> 4) Compile the driver source files and it will generate rhinefet.o,
> and // Aca es donde no dice como compilarlo y me quede
> copy it to correct driver installation path (The installation
> directory
> is different in different kernel versions. In 2.4.x kernel, the
> path is
> /lib/modules/KERNEL_VERSION/kernel/drivers/net/, and in 2.2.x
> kernel,
> the path is /lib/modules/KERNEL_VERSION/net/, the KERNEL_VERSION
> (see
> above) means the kernel version of your Linux distribution. If
> you don't
> know your kernel version , please run 'uname -r' command in
> command
> line. The kernel version will look like '2.2.16', '2.4.2-2smp'
> etc.) :
> make install
>
> 5) Check configuration file (/etc/modules.conf or
> /etc/conf.modules,it
> depend on your Linux distribution) for loading kernel modules.
> Make sure
> there is the following content in the configuration file, where #
> is
> interface number (eg: alias eth0 rhinefet):
> alias eth# rhinefet
>
> 6) Reboot now:
> shutdown -r now
>
> 7) Install your driver module (If the driver module is in the wrong
> place,
> an error message will appear, and say that can't find the driver
> module):
> insmod rhinefet
>
> 8) Use ifconfig command to assign the IP address, where # is network
>
> interface number:
> ifconfig eth# <IP>
>
> 9) Check the interface works:
> ping <remote_host_IP>
>
>
> Uninstallation
> ==============
> Please enter the following commands to uninstall your driver:
> make uninstall
> y asi sigue
Csmo que no estan explicados los pasos de la compilacisn e instalacisn de
los drivers??
A mi entender esta bien clarito...... ;)
Todos los pasos hasta ahm descriptos son para compilar e instalar los
drivers de esa placa de red.......
Si en algo mas te puedo ayudar pega el grito ;)
Saludos y suerte!
--
Diego.-
=====
"No he venido, amigos mmos, a robarles el corazsn......."
Julio cisar. (acto III, escena II)
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!
http://promotions.yahoo.com/new_mail
--
To UNSUBSCRIBE, email to debian-user-spanish-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
Reply to: