Salida de lm-sensors
Bueno, acabo de instalar el lm-sensors y cuando escribo sensors en la consola me sale:
----------------------------------------------------------------
lm78-isa-0290
Adapter: ISA adapter
VCore 1: +2.00 V (min = +2.53 V, max = +3.09 V) ALARM
VCore 2: +1.49 V (min = +2.53 V, max = +3.09 V) ALARM
+3.3V: +3.36 V (min = +2.98 V, max = +3.63 V)
+5V: +5.08 V (min = +4.49 V, max = +5.51 V)
+12V: +11.43 V (min = +10.82 V, max = +13.19 V)
-12V: -10.46 V (min = -13.18 V, max = -10.79 V) ALARM
-5V: -4.79 V (min = -5.49 V, max = -4.50 V)
fan1: 0 RPM (min = 3000 RPM, div = 2) ALARM
fan2: 3750 RPM (min = 3000 RPM, div = 2)
fan3: 0 RPM (min = 3000 RPM, div = 2) ALARM
ERROR: Can't get TEMP data!
vid: +35.00 V
alarms: Chassis intrusion detection ALARM
lm75-i2c-1-4c
Adapter: SMBus PIIX4 adapter at 5000
ERROR: Can't get temperature data!
eeprom-i2c-1-51
Adapter: SMBus PIIX4 adapter at 5000
Memory type: SDR SDRAM DIMM
Memory size (MB): 256
eeprom-i2c-1-50
Adapter: SMBus PIIX4 adapter at 5000
Memory type: SDR SDRAM DIMM
Memory size (MB): 128
---------------------------------------------------------------
Bueno, pues como no tengo mucha idea me gustaría saber que son todas esas ALARM y si son graves o no. Tambien quisiera saber porqué no puede coger la temperatura, la BIOS por lo menos la coge vamos, y yo en lo de ACPI en el kernel he activado lo de thermal zone. Los "drivers" que me coge son todos los que me decia el sensors-detect (lm75, isa, eeprom, lm78 etc). Saludos.
--
"No hay nada peor que ser vulgar"
sotanez@jabber.cn
Reply to: