Al compilar kernel no van las x
Un amigo ha instalado debian woody con el kernel 2.20 de serie xD y las x le van estupendamente, pero al compilar las sources del 2.20 o el 2.6.0-test5 pues no se inicia nada.
Esto es lo que sale en el log del kdm y del Xfree (en los dos igual):
----------------------------------------------------------------------
warning: process set to nice value 0 instead of -10 as requested
_XSERVTransSocketOpen: socket() failed for local
_XSERVTransSocketOpenCOTSServer: Unable to open socket for local
_XSERVTransOpen: transport open failed for local/(none):0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for local
Fatal server error:
Cannot establish any listening sockets - Make sure an X server isn't already running
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.
--------------------------------------------------------------------
Esto es la configuracion del xfree:
--------------------------------------------------------------------
### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
# dpkg-reconfigure xserver-xfree86
# as root. Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
# Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
# Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "pex5"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
Load "xie"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "es"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/ttyS0"
Option "Protocol" "Auto"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "s3virge"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28-96
VertRefresh 50-76
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection
#Section "DRI"
#Mode 0666
#EndSection
### END DEBCONF SECTION
-----------------------------------------------------------------------
Y esto es un dmesg por si acaso:
------------------------------------------------------------------------
Linux version 2.6.0-test5 (root@(none)) (gcc version 2.95.4 20011002 (Debian prerelease)) #10 Sat Oct 25 13:57:00 CEST 2003
Video mode to be used for restore is ffff
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000003000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
48MB LOWMEM available.
On node 0 totalpages: 12288
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 8192 pages, LIFO batch:2
HighMem zone: 0 pages, LIFO batch:1
DMI not present.
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=Linux ro root=341
Initializing CPU#0
PID hash table entries: 256 (order 8: 2048 bytes)
Detected 166.413 MHz processor.
Console: colour VGA+ 80x25
Memory: 46320k/49152k available (1058k kernel code, 2376k reserved, 434k data, 272k init, 0k highmem)
Calibrating delay loop... 326.65 BogoMIPS
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: After generic identify, caps: 008001bf 00000000 00000000 00000000
CPU: After vendor identify, caps: 008001bf 00000000 00000000 00000000
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After all inits, caps: 008001bf 00000000 00000000 00000000
CPU: Intel Pentium MMX stepping 04
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Linux NoNET1.0 for Linux 2.6
PCI: PCI BIOS revision 2.10 entry at 0xfb470, last bus=0
PCI: Using configuration type 1
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fc160
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc188, dseg 0xf0000
PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
pty: 256 Unix98 ptys configured
udf: registering filesystem
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: cpp_mux: aa55f00f52ad51(87)
parport0: cpp_daisy: aa5500ff(80)
parport0: assign_addrs: aa5500ff(80)
parport0: cpp_mux: aa55f00f52ad51(87)
parport0: cpp_daisy: aa5500ff(80)
parport0: assign_addrs: aa5500ff(80)
Using anticipatory scheduling io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: ST52520A, ATA DISK drive
hdb: SAMSUNG SV0682D, ATA DISK drive
hdc: CD-ROM 50X L, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 5009760 sectors (2564 MB) w/112KiB Cache, CHS=4970/16/63
hda: hda1
hdb: max request size: 128KiB
hdb: 13381200 sectors (6851 MB) w/480KiB Cache, CHS=14160/15/63
hdb: hdb1 hdb2 < hdb5 hdb6 >
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: E-IDE Model: CD-ROM 50X L Rev: 11
Type: CD-ROM ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 4x/50x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5
mice: PS/2 mouse device common for all mice
input: PC Speaker
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
es1370: version v0.38 time 19:30:03 Oct 21 2003
es1371: version v0.32 time 19:30:21 Oct 21 2003
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 272k freed
Adding 489940k swap on /dev/hdb5. Priority:-1 extents:1
-----------------------------------------------------------------------
A ver si me pueden decir que pasa. Gracias y un saludo.
Reply to: