Alguno ha podido configurar dhcp

["juanca" <juanca@sat.com.py>]

hola a todos
tengo un problema con dhcp, lo configure pero no funciona, no se que otros
modulos necesita creo que multicast pero no lo encuentro


Esto es lo que tengo en mi confugaracion que no funciona.
bueno tengo dos tarjetas de red eth0 es la que esta con el proveedor  y la
eth1 es la que esta con red interna tengo nateado con iptables hecho con
MASQUERADE por que es ipdinamico ashuda please
# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#

 option definitions common to all supported networks...
option domain-name "fugue.com";
option domain-name-servers toccata.fugue.com;

#option subnet-mask 255.255.255.224;
#default-lease-time 600;
#max-lease-time 7200;

subnet 204.254.239.0 netmask 255.255.255.224 {
  range 204.254.239.10 204.254.239.20;
option broadcast-address 204.254.239.31;
  option routers prelude.fugue.com;
}

 The other subnet that shares this physical network
subnet 204.254.239.32 netmask 255.255.255.224 {
  range dynamic-bootp 204.254.239.33 204.254.239.40;
  option broadcast-address 204.254.239.31;
  option routers snarg.fugue.com;
}

subnet 192.168.0.0 netmask 255.255.255.0 {
  range 192.168.0.5 192.168.0.254;
  option domain-name-servers IPDNS1, DNS";
  option domain-name "home";
  option routers 192.168.0.1;
  option subnet-mask 255.255.255.0;
  option broadcast-address 192.168.0.255;
  default-lease-time 600;
  max-lease-time 7200;
}

# Hosts which require special configuration options can be listed in
# host statements.   If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.

host passacaglia {
  hardware ethernet 0:0:c0:5d:bd:95;
  filename "vmunix.passacaglia";
  server-name "toccata.fugue.com";
}

# Fixed IP addresses can also be specified for hosts.   These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
host fantasia {
  hardware ethernet 08:00:07:26:c0:a5;
  fixed-address fantasia.fugue.com;
}

# If a DHCP or BOOTP client is mobile and might be connected to a variety
}

# If a DHCP or BOOTP client is mobile and might be connected to a variety
# of networks, more than one fixed address for that host can be specified.
# Hosts can have fixed addresses on some networks, but receive dynamically
# allocated address on other subnets; in order to support this, a host
# declaration for that client must be given which does not have a fixed
# address.   If a client should get different parameters depending on
# what subnet it boots on, host declarations for each such network should
# be given.   Finally, if a domain name is given for a host's fixed address
# and that domain name evaluates to more than one address, the address
# corresponding to the network to which the client is attached, if any,
# will be assigned.
host confusia {
  hardware ethernet 02:03:04:05:06:07;
  fixed-address confusia-1.fugue.com, confusia-2.fugue.com;
  filename "vmunix.confusia";
  server-name "toccata.fugue.com";
}

host confusia {
  hardware ethernet 02:03:04:05:06:07;
  fixed-address confusia-3.fugue.com;
  filename "vmunix.confusia";
  server-name "snarg.fugue.com";
}

host confusia {
  hardware ethernet 02:03:04:05:06:07;
  filename "vmunix.confusia";
  server-name "bb.home.vix.com";
}
"/etc/dhcpd.conf" 91L, 3141C
91,1          Bot