Bueno ala al final le he puesto una placa de puertos USB, para poder llevar datos en un pendrive de estos.
He recompilado el kernel y puesto todo el tema usb para que funcione (creo).
parece que lo reconoce (añado syslog al final ya que es largo *)
y si hago cat /proc/scsi/scsi
pi:/usr/src/linux# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: OTi Model: Flash Disk Rev: 1.11
Type: Direct-Access ANSI SCSI revision: 02
pero luego como lo monto ?
con
mount /dev/sda1 /mnt/hdd/
mount: /dev/sda1 is not a valid block device
y asi con todo lo que se me ocurre. se me esta pasando algo por alto ??
una ayuda please que me hace falta
gracias de antemano
* Partes del syslog que estimo puedan ayudar:
Nov 9 20:12:31 pi kernel: ehci_hcd 0000:00:08.2: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
Nov 9 20:12:31 pi kernel: hub 1-0:1.0: port 5, status 501, change 1, 480 Mb/s
Nov 9 20:12:32 pi kernel: hub 1-0:1.0: debounce: port 5: delay 100ms stable 4 status 0x501
Nov 9 20:12:32 pi kernel: ehci_hcd 0000:00:08.2: port 5 full speed --> companion
Nov 9 20:12:32 pi kernel: ehci_hcd 0000:00:08.2: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT
Nov 9 20:12:32 pi kernel: ohci_hcd 0000:00:08.0: GetStatus roothub.portstatus [3] = 0x00010101 CSC PPS CCS
Nov 9 20:12:32 pi kernel: hub 2-0:1.0: port 3, status 101, change 1, 12 Mb/s
Nov 9 20:12:32 pi kernel: hub 2-0:1.0: debounce: port 3: delay 100ms stable 4 status 0x101
Nov 9 20:12:32 pi kernel: ohci_hcd 0000:00:08.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
Nov 9 20:12:32 pi kernel: hub 2-0:1.0: new USB device on port 3, assigned address 2
Nov 9 20:12:32 pi kernel: usb 2-3: new device strings: Mfr=1, Product=2, SerialNumber=3
Nov 9 20:12:32 pi kernel: drivers/usb/core/message.c: USB device number 2 default language ID 0x409
Nov 9 20:12:32 pi kernel: usb 2-3: Product: Solid state disk
Nov 9 20:12:32 pi kernel: usb 2-3: Manufacturer: USB
Nov 9 20:12:32 pi kernel: usb 2-3: SerialNumber: 316415E83ED58514
Nov 9 20:12:32 pi kernel: drivers/usb/core/usb.c: usb_hotplug
Nov 9 20:12:32 pi kernel: usb 2-3: registering 2-3:1.0 (config #1, interface 0)Nov 9 20:12:32 pi kernel: drivers/usb/core/usb.c: usb_hotplug
Nov 9 20:12:34 pi kernel: SCSI subsystem initialized
Nov 9 20:12:34 pi kernel: Initializing USB Mass Storage driver...
Nov 9 20:12:34 pi kernel: usb-storage 2-3:1.0: usb_probe_interface
Nov 9 20:12:34 pi kernel: usb-storage 2-3:1.0: usb_probe_interface - got id
Nov 9 20:12:34 pi kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Nov 9 20:12:34 pi kernel: Vendor: OTi Model: Flash Disk Rev: 1.11
Nov 9 20:12:34 pi kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 9 20:12:34 pi kernel: WARNING: USB Mass Storage data integrity not assured
Nov 9 20:12:34 pi kernel: USB Mass Storage device found at 2
Nov 9 20:12:34 pi kernel: drivers/usb/core/usb.c: registered new driver usb-storage
Nov 9 20:12:34 pi kernel: USB Mass Storage support registered.
Nov 9 20:12:34 pi scsi.agent[22993]: bogus sysfs DEVPATH=/devices/pci0000:00/0000:00:08.0/usb2/2-3/2-3:1.0/host0/0:0:0:0