Re: ahora no me van los drivers de nvidia
On Thu, Nov 06, 2003 at 06:42:58PM +0100, SoTaNeZ wrote:
> Siempre me han ido bien, aunque tengo el kernel 2.6.0-test5 con el parche para nvidia, pero se actualizó algo con el apt-get upgrade y ahora después de tres intentos me manda a la consola.
> Y si intento compilar otra vez los drivers de nvidia en el kernel pues funciona bien, los carga a la perfección y como ya he dicho cuando empezó a fallar yo no habia tocado nada.
Reinstalá el módulo para el kernel.
> Esto pone en el kdm.log respecto al fallo.
>
> -----------------------------------------------------------------------
> This is a pre-release version of XFree86, and is not supported in any
> way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
> to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
> please check the latest version in the XFree86 CVS repository
> (http://www.XFree86.Org/cvs)
>
> XFree86 Version 4.2.1.1 (Debian 4.2.1-13 20031030071229 root@newraff.debian.org) / X Window System
> (protocol Version 11, revision 0, vendor release 6600)
> Release Date: 18 October 2002
> If the server is older than 6-12 months, or if your card is
> newer than the above date, look for a newer version before
> reporting problems. (See http://www.XFree86.Org/)
> Build Operating System: Linux 2.4.22-rc2 i686 [ELF]
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/XFree86.0.log", Time: Thu Nov 6 17:08:11 2003
> (==) Using config file: "/etc/X11/XF86Config-4"
> Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found
> (EE) Failed to load module "nvidia" (once-only module, 1075378400)
> (II) [GLX]: Initializing GLX extension
>
> Fatal server error:
> Caught signal 11. Server aborting
>
>
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages.
> This can be found in the log file "/var/log/XFree86.0.log".
> Please report problems to submit@bugs.debian.org.
> -----------------------------------------------------------------------
>
> Y esto tengo en el XF86Config-4
>
> # XF86Config-4 (XFree86 X server configuration file) generated by dexconf, the
> # Debian X Configuration tool, using values from the debconf database.
> #
> # Edit this file with caution, and see the XF86Config-4 manual page.
> # (Type "man XF86Config-4" at the shell prompt.)
> #
> # This file is automatically updated on xserver-xfree86 package upgrades *only*
> # if it has not been modified since the last upgrade of the xserver-xfree86
> # package.
> #
> # If you have edited this file but would like it to be automatically updated
> # again, run the following commands as root:
> #
> # cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
> # md5sum /etc/X11/XF86Config-4 > /var/lib/xfree86/XF86Config-4.md5sum
> # dpkg-reconfigure xserver-xfree86
>
> Section "Files"
> FontPath "unix/:7100" # local font server
> # if the local font server has problems, we can fall back on these
> FontPath "/usr/lib/X11/fonts/Type1"
> FontPath "/usr/lib/X11/fonts/CID"
> FontPath "/usr/lib/X11/fonts/Speedo"
> FontPath "/usr/lib/X11/fonts/misc"
> FontPath "/usr/lib/X11/fonts/cyrillic"
> FontPath "/usr/lib/X11/fonts/100dpi"
> FontPath "/usr/lib/X11/fonts/75dpi"
> EndSection
>
> Section "Module"
> Load "nvidia" #Ahora pongo nv mientras se soluciona el fallo
> Load "bitmap"
> Load "dbe"
> Load "ddc"
> Load "extmod"
> Load "freetype"
> Load "glx"
> Load "int10"
> Load "record"
> Load "speedo"
> Load "type1"
> Load "vbe"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "keyboard"
> Option "CoreKeyboard"
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "es"
> EndSection
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> Option "CorePointer"
> Option "Device" "/dev/psaux"
> Option "Protocol" "PS/2"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Mouse"
> Driver "mouse"
> Option "SendCoreEvents" "true"
> Option "Device" "/dev/input/mice"
> Option "Protocol" "ImPS/2"
> EndSection
>
> Section "Device"
> Identifier "NVIDIA TNT2"
> Driver "nvidia" #Uso nv de momento
> Option "NoLogo" "True"
> Option "HWCursor" "True"
> EndSection
>
> Section "Monitor"
> Identifier "SAMSUNG"
> HorizSync 30-55
> VertRefresh 50-120
> Option "DPMS"
> EndSection
>
> Section "Screen"
> Identifier "Default Screen"
> Device "NVIDIA TNT2"
> Monitor "SAMSUNG"
> DefaultDepth 16
> SubSection "Display"
> Depth 1
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 4
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 8
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 15
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 16
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 24
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> EndSection
>
> Section "ServerLayout"
> Identifier "Default Layout"
> Screen "Default Screen"
> InputDevice "Generic Keyboard"
> InputDevice "Configured Mouse"
> InputDevice "Generic Mouse"
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
>
> Gracias y un saludo.
>
>
> --
> To UNSUBSCRIBE, email to debian-user-spanish-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
--
Fernando M. Maresca
Reply to: