RE: configuración de red
La línea de
00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
10/100
Ethernet (rev 82)
A mí me cambia en (rev 91) y no creo que tenga nada que ver. La placa
funciona en WXP y en Suse.
Cualquier intento que hago de instalar o configurar el módulo de SiS900
caba mal.
-----Mensaje original-----
De: José Luis Pérez Yubero [mailto:jpy@empre.es]
Enviado el: martes, 27 de mayo de 2003 8:12
Para: debian-user-spanish@lists.debian.org
Asunto: Re: configuración de red
----- Original Message -----
From: "Ricardo - Eureka!" <ricardo@sinectis.com.ar>
To: "Lista Español Debian" <debian-user-spanish@lists.debian.org>
Sent: Monday, May 26, 2003 4:16 PM
Subject: Re: configuración de red
> On Mon, May 26, 2003 at 02:22:41AM +0200, carlos@carlosterradillos.com
wrote:
>
> > /lib/modules/2.2.20-idepci/net/sis900.o: insmod sis900 failed
> >
> > Falló la instalación.
> mandanos la salida de lspci, dmesg y lsmod.
>
> --
> Ricardo A.Frydman
> Analista de Sistemas de Computación http://www.eureka-linux.com.ar
>
>
>
Hola a todos,
A mi me pasa el mismo problema, cuando intento cargar el
módulo de
sis900 me dice que falla. Si intento configurarlo mediante el "modconf"
dice que el dispositivo está "busy".
Les adjunto las salidas de lspci, dsmesg y lsmod por si ven algo en
ellos.
Muchas gracias por adelantado.
---------------------------------LSPCI----------------------------
Goolum:/home/jose# lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 31)
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev
d0)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
10/100
Ethernet (rev 82)
00:01.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07)
00:01.3 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07)
00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
SiS
PCI Audio Accelerator (rev 02)
00:01.6 Modem: Silicon Integrated Systems [SiS]: Unknown device 7013
(rev
a0)
00:02.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP
00:0a.0 CardBus bridge: Texas Instruments PCI4410 PC card Cardbus
Controller
(rev 02)
00:0a.1 FireWire (IEEE 1394): Texas Instruments: Unknown device 8017
(rev
02)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
SiS630
GUI Accelerator+3D (rev 31)
----------------------------------LSMOD------------------------------
Module Size Used by
ds 6400 1
i82365 22672 1
pcmcia_core 45824 0 [ds i82365]
af_packet 6152 0 (unused)
unix 11352 22 (autoclean)
------------------------DMESG-------------------------------------------
---
Linux version 2.2.20 (herbert@gondolin) (gcc version 2.7.2.3) #1 Sat Apr
20
11:45:28 EST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0009f000 @ 00000000 (usable)
BIOS-e820: 0def0000 @ 00100000 (usable)
Detected 863932 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1723.59 BogoMIPS
Memory: 224356k/229312k available (1756k kernel code, 412k reserved,
2636k
data, 152k init)
Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
256K L2 cache (8 way)
CPU: L2 Cache: 256K
CPU: Intel Pentium III (Coppermine) stepping 06
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xeb2e0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Starting kswapd v 1.5
Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS44 at 0x3220 (irq = 3) is a 8250
ttyS45 at 0x3228 (irq = 3) is a 8250
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
SIS5513: IDE controller on PCI bus 00 dev 01
SIS5513: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
hda: HITACHI_DK23BA-10, ATA DISK drive
hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: HITACHI_DK23BA-10, 9590MB w/512kB Cache, CHS=1222/255/63
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
Failed initialization of WD-7000 SCSI card!
IBM MCA SCSI: Version 3.2
IBM MCA SCSI: No Microchannel-bus present --> Aborting.
This machine does not have any IBM MCA-bus
or the MCA-Kernel-support is not enabled!
megaraid: v1.11 (Aug 23, 2000)
aec671x_detect:
3ware Storage Controller device driver for Linux v1.02.00.008.
3w-xxxx: tw_findcards(): No cards found.
scsi : 0 hosts.
scsi : detected total.
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 >
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
apm: disabled on user request.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 152k freed
NET4: Unix domain sockets 1.0 for Linux NET4.0.
Adding Swap: 257000k swap-space (priority -1)
Linux PCMCIA Card Services 3.1.33
kernel build: 2.2.20 #1 Sat Apr 20 11:45:28 EST 2002
options: [pci] [cardbus] [apm]
PCI routing table version 1.0 at 0xfe840
Intel ISA/PCI/CardBus PCIC probe:
TI 4410 rev 02 PCI-to-CardBus at slot 00:0a, mem 0x68000000
host opts [0]: [ring] [serial pci & irq] [no pci irq] [lat 168/176]
[bus
32/34]
ISA irqs (scanned) = 3,4,7,9 polling interval = 1000 ms
Gracias de nuevo.!
---------------------------------------------------------------------
This message may contain confidential and/or privileged information.
If you are not the addressee or authorized to receive this for the
addressee, you must not use, copy, disclose or take any action based
on this message or any information herein. If you have received this
message by mistake, please advise the sender immediately by reply
e-mail and delete this message. Thank you for your cooperation.
Este mensaje puede contener información confidencial o privilegiada.
Si Vd. no es el destinatario ni está autorizado por el mismo para
recibir este mensaje, Vd. no debe usar, copiar, revelar ni tomar
ninguna medida basada en este mensaje o en la información que
contiene. Si Vd. ha recibido este mensaje por error, notifíquelo de
forma inmediata al remitente por correo electrónico y borre el
mensaje. Gracias por su cooperación.
---------------------------------------------------------------------
--
To UNSUBSCRIBE, email to debian-user-spanish-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
Reply to: