Re: Peor: Fatal server error
Los archivos de las fuentes parecen estar todos bien, incluyo aquí de todas
formas todo el log por si encontrais otra solución.
Parece incapaz de encontrar los módulos pex5 y xie, alguien sabe como puedo
volverlos a instalar?
Gracias.
Chainy.
xdm.log
-------------------
warning: process set to nice value 0 instead of -10 as requested
XFree86 Version 3.3.6a / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: xx November 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.4.13 i686 [ELF]
Configured drivers:
S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
newmmio, mmio_928, s3_generic
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(--) no ModulePath specified using default: /usr/X11R6/lib/modules
pex5.so: Unknown error loading module
xie.so: Unknown error loading module
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc105"
(**) XKB: layout: "es"
(**) Mouse: type: Microsoft, device: /dev/ttyS0, baudrate: 1200
(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
(**) S3: Graphics device ID: "S3 Trio 64V+"
(**) S3: Monitor ID: "Generic Monitor"
(--) S3: Mode "800x600" needs vert refresh rate of 85.14 Hz. Deleted.
(--) S3: Mode "1024x768" needs vert refresh rate of 86.96 Hz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 60.06 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 68.68 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 67.50 kHz. Deleted.
(--) S3: Mode "1280x960" needs hsync freq of 60.00 kHz. Deleted.
(--) S3: Mode "1280x960" needs hsync freq of 85.94 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 63.98 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 79.98 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 81.25 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 106.25 kHz. Deleted.
(--) S3: Mode "1792x1344" needs hsync freq of 83.66 kHz. Deleted.
(--) S3: Mode "1792x1344" needs hsync freq of 106.27 kHz. Deleted.
(--) S3: Mode "1856x1392" needs hsync freq of 86.35 kHz. Deleted.
(--) S3: Mode "1856x1392" needs hsync freq of 112.50 kHz. Deleted.
(--) S3: Mode "1920x1440" needs hsync freq of 90.00 kHz. Deleted.
(--) S3: Mode "1920x1440" needs hsync freq of 112.50 kHz. Deleted.
Warning: The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
Warning: The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to
"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr
/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/S
peedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
Couldn't open RGB_DB '/usr/X11R6/lib/X11/rgb'
(--) S3: PCI: Trio32/64 rev 44, Linear FB @ 0xf8000000
(--) S3: chipset: Trio64V+ rev. 44
(--) S3: chipset driver: newmmio
(--) S3: card type: PCI
(**) S3: videoram: 2048k
(--) S3: Ramdac type: s3_trio64
(--) S3: Ramdac speed: 135 MHz
(--) S3: Using Trio32/64 programmable clock (MCLK 44.744 MHz)
(--) S3: Maximum allowed dot-clock: 95.000 MHz
(**) S3: Mode "800x600": mode clock = 49.500
(**) S3: Using 16 bpp. Color weight: 565
(--) S3: Virtual resolution set to 800x600
(--) S3: Local bus LAW is 0xF8000000
(--) S3: Using a banksize of 2048k, line width of 800
(--) S3: Using a single 64x64 area at (736,601) for expanding pixmaps
(--) S3: Using 16 planes of 736x709 at (0,601) aligned 8 as font cache
error opening security policy file /usr/X11R6/lib/X11/xserver/SecurityPolicy
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Can't find file "xfree86" for keycodes include
> Exiting
> Abandoning keycodes file "default"
Errors from xkbcomp are not fatal to the X server
Couldn't load XKB keymap, falling back to pre-XKB keymap
Fatal server error:
could not open default font 'fixed'
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
xdm error (pid 216): Server for display :0 terminated unexpectedly: 1
warning: process set to nice value 0 instead of -10 as requested
XFree86 Version 3.3.6a / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: xx November 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.4.13 i686 [ELF]
Configured drivers:
S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
newmmio, mmio_928, s3_generic
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(--) no ModulePath specified using default: /usr/X11R6/lib/modules
pex5.so: Unknown error loading module
xie.so: Unknown error loading module
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc105"
(**) XKB: layout: "es"
(**) Mouse: type: Microsoft, device: /dev/ttyS0, baudrate: 1200
(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
(**) S3: Graphics device ID: "S3 Trio 64V+"
(**) S3: Monitor ID: "Generic Monitor"
(--) S3: Mode "800x600" needs vert refresh rate of 85.14 Hz. Deleted.
(--) S3: Mode "1024x768" needs vert refresh rate of 86.96 Hz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 60.06 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 68.68 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 67.50 kHz. Deleted.
(--) S3: Mode "1280x960" needs hsync freq of 60.00 kHz. Deleted.
(--) S3: Mode "1280x960" needs hsync freq of 85.94 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 63.98 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 79.98 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 81.25 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 106.25 kHz. Deleted.
(--) S3: Mode "1792x1344" needs hsync freq of 83.66 kHz. Deleted.
(--) S3: Mode "1792x1344" needs hsync freq of 106.27 kHz. Deleted.
(--) S3: Mode "1856x1392" needs hsync freq of 86.35 kHz. Deleted.
(--) S3: Mode "1856x1392" needs hsync freq of 112.50 kHz. Deleted.
(--) S3: Mode "1920x1440" needs hsync freq of 90.00 kHz. Deleted.
(--) S3: Mode "1920x1440" needs hsync freq of 112.50 kHz. Deleted.
Warning: The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
Warning: The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to
"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr
/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/S
peedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
Couldn't open RGB_DB '/usr/X11R6/lib/X11/rgb'
(--) S3: PCI: Trio32/64 rev 44, Linear FB @ 0xf8000000
(--) S3: chipset: Trio64V+ rev. 44
(--) S3: chipset driver: newmmio
(--) S3: card type: PCI
(**) S3: videoram: 2048k
(--) S3: Ramdac type: s3_trio64
(--) S3: Ramdac speed: 135 MHz
(--) S3: Using Trio32/64 programmable clock (MCLK 44.744 MHz)
(--) S3: Maximum allowed dot-clock: 95.000 MHz
(**) S3: Mode "800x600": mode clock = 49.500
(**) S3: Using 16 bpp. Color weight: 565
(--) S3: Virtual resolution set to 800x600
(--) S3: Local bus LAW is 0xF8000000
(--) S3: Using a banksize of 2048k, line width of 800
(--) S3: Using a single 64x64 area at (736,601) for expanding pixmaps
(--) S3: Using 16 planes of 736x709 at (0,601) aligned 8 as font cache
error opening security policy file /usr/X11R6/lib/X11/xserver/SecurityPolicy
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Can't find file "xfree86" for keycodes include
> Exiting
> Abandoning keycodes file "default"
Errors from xkbcomp are not fatal to the X server
Couldn't load XKB keymap, falling back to pre-XKB keymap
Fatal server error:
could not open default font 'fixed'
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
xdm error (pid 216): Server for display :0 terminated unexpectedly: 1
warning: process set to nice value 0 instead of -10 as requested
XFree86 Version 3.3.6a / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: xx November 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.4.13 i686 [ELF]
Configured drivers:
S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
newmmio, mmio_928, s3_generic
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(--) no ModulePath specified using default: /usr/X11R6/lib/modules
pex5.so: Unknown error loading module
xie.so: Unknown error loading module
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc105"
(**) XKB: layout: "es"
(**) Mouse: type: Microsoft, device: /dev/ttyS0, baudrate: 1200
(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
(**) S3: Graphics device ID: "S3 Trio 64V+"
(**) S3: Monitor ID: "Generic Monitor"
(--) S3: Mode "800x600" needs vert refresh rate of 85.14 Hz. Deleted.
(--) S3: Mode "1024x768" needs vert refresh rate of 86.96 Hz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 60.06 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 68.68 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 67.50 kHz. Deleted.
(--) S3: Mode "1280x960" needs hsync freq of 60.00 kHz. Deleted.
(--) S3: Mode "1280x960" needs hsync freq of 85.94 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 63.98 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 79.98 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 81.25 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 106.25 kHz. Deleted.
(--) S3: Mode "1792x1344" needs hsync freq of 83.66 kHz. Deleted.
(--) S3: Mode "1792x1344" needs hsync freq of 106.27 kHz. Deleted.
(--) S3: Mode "1856x1392" needs hsync freq of 86.35 kHz. Deleted.
(--) S3: Mode "1856x1392" needs hsync freq of 112.50 kHz. Deleted.
(--) S3: Mode "1920x1440" needs hsync freq of 90.00 kHz. Deleted.
(--) S3: Mode "1920x1440" needs hsync freq of 112.50 kHz. Deleted.
Warning: The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
Warning: The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to
"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr
/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/S
peedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
Couldn't open RGB_DB '/usr/X11R6/lib/X11/rgb'
(--) S3: PCI: Trio32/64 rev 44, Linear FB @ 0xf8000000
(--) S3: chipset: Trio64V+ rev. 44
(--) S3: chipset driver: newmmio
(--) S3: card type: PCI
(**) S3: videoram: 2048k
(--) S3: Ramdac type: s3_trio64
(--) S3: Ramdac speed: 135 MHz
(--) S3: Using Trio32/64 programmable clock (MCLK 44.744 MHz)
(--) S3: Maximum allowed dot-clock: 95.000 MHz
(**) S3: Mode "800x600": mode clock = 49.500
(**) S3: Using 16 bpp. Color weight: 565
(--) S3: Virtual resolution set to 800x600
(--) S3: Local bus LAW is 0xF8000000
(--) S3: Using a banksize of 2048k, line width of 800
(--) S3: Using a single 64x64 area at (736,601) for expanding pixmaps
(--) S3: Using 16 planes of 736x709 at (0,601) aligned 8 as font cache
error opening security policy file /usr/X11R6/lib/X11/xserver/SecurityPolicy
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Can't find file "xfree86" for keycodes include
> Exiting
> Abandoning keycodes file "default"
Errors from xkbcomp are not fatal to the X server
Couldn't load XKB keymap, falling back to pre-XKB keymap
Fatal server error:
could not open default font 'fixed'
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
xdm error (pid 216): Server for display :0 terminated unexpectedly: 1
warning: process set to nice value 0 instead of -10 as requested
XFree86 Version 3.3.6a / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: xx November 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.4.13 i686 [ELF]
Configured drivers:
S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
newmmio, mmio_928, s3_generic
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(--) no ModulePath specified using default: /usr/X11R6/lib/modules
pex5.so: Unknown error loading module
xie.so: Unknown error loading module
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc105"
(**) XKB: layout: "es"
(**) Mouse: type: Microsoft, device: /dev/ttyS0, baudrate: 1200
(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
(**) S3: Graphics device ID: "S3 Trio 64V+"
(**) S3: Monitor ID: "Generic Monitor"
(--) S3: Mode "800x600" needs vert refresh rate of 85.14 Hz. Deleted.
(--) S3: Mode "1024x768" needs vert refresh rate of 86.96 Hz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 60.06 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 68.68 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 67.50 kHz. Deleted.
(--) S3: Mode "1280x960" needs hsync freq of 60.00 kHz. Deleted.
(--) S3: Mode "1280x960" needs hsync freq of 85.94 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 63.98 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 79.98 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 81.25 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 106.25 kHz. Deleted.
(--) S3: Mode "1792x1344" needs hsync freq of 83.66 kHz. Deleted.
(--) S3: Mode "1792x1344" needs hsync freq of 106.27 kHz. Deleted.
(--) S3: Mode "1856x1392" needs hsync freq of 86.35 kHz. Deleted.
(--) S3: Mode "1856x1392" needs hsync freq of 112.50 kHz. Deleted.
(--) S3: Mode "1920x1440" needs hsync freq of 90.00 kHz. Deleted.
(--) S3: Mode "1920x1440" needs hsync freq of 112.50 kHz. Deleted.
Warning: The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
Warning: The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to
"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr
/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/S
peedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
Couldn't open RGB_DB '/usr/X11R6/lib/X11/rgb'
(--) S3: PCI: Trio32/64 rev 44, Linear FB @ 0xf8000000
(--) S3: chipset: Trio64V+ rev. 44
(--) S3: chipset driver: newmmio
(--) S3: card type: PCI
(**) S3: videoram: 2048k
(--) S3: Ramdac type: s3_trio64
(--) S3: Ramdac speed: 135 MHz
(--) S3: Using Trio32/64 programmable clock (MCLK 44.744 MHz)
(--) S3: Maximum allowed dot-clock: 95.000 MHz
(**) S3: Mode "800x600": mode clock = 49.500
(**) S3: Using 16 bpp. Color weight: 565
(--) S3: Virtual resolution set to 800x600
(--) S3: Local bus LAW is 0xF8000000
(--) S3: Using a banksize of 2048k, line width of 800
(--) S3: Using a single 64x64 area at (736,601) for expanding pixmaps
(--) S3: Using 16 planes of 736x709 at (0,601) aligned 8 as font cache
error opening security policy file /usr/X11R6/lib/X11/xserver/SecurityPolicy
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Can't find file "xfree86" for keycodes include
> Exiting
> Abandoning keycodes file "default"
Errors from xkbcomp are not fatal to the X server
Couldn't load XKB keymap, falling back to pre-XKB keymap
Fatal server error:
could not open default font 'fixed'
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
xdm error (pid 216): Server for display :0 terminated unexpectedly: 1
xdm error (pid 216): Display :0 is being disabled
--
To UNSUBSCRIBE, email to debian-user-spanish-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: