Victor Sanahuja escribiu:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1el usb-storage no, pero de todas formas no se bien como dices que lo prueba, compilo un kernel con esos modulos, los cargo y luego que, que programa o que comando uso para que pase las fotos a undirectorio?En bulma hay un buen articulo que te explica como hacerlo: http://bulmalug.net/body.phtml?nIdNoticia=1533 No lo dice, pero como lo tienes como montar con vfat, activa tabmien vfat en el nucleo :)
Ya lo he hecho así, y no consigo hacerla funcionar, si compilo como "no" modulos, ya no hace nada, y si compilo como modulos todas las opciones del articulo, luego en /proc/bus/usb/devices si monto con mount -t usbdevfs none /proc/bus/usb si sale que algo reconoce, pero luego al intentar montar como scsi me dice que nada de nada.
Con usbview me cuenta que hay esto conectado: Unknown Device Speed: 12Mb/s (full) USB Version: 1.00 Device Class: 00(>ifc ) Device Subclass: 00 Device Protocol: 00 Maximum Default Endpoint Size: 8 Number of Configurations: 1 Vendor Id: 04a5 Product Id: 3003 Revision Number: 1.00 Config Number: 1 Number of Interfaces: 2 Attributes: 80 MaxPower Needed: 500mA Interface Number: 0 Name: (none) Alternate Number: 0 Class: ff(vend.) Sub Class: 0 Protocol: 0 Number of Endpoints: 1 Endpoint Address: 81 Direction: in Attribute: 1 Type: Isoc Max Packet Size: 0 Interval: 1ms Interface Number: 0 Name: (none) Alternate Number: 1 Class: ff(vend.) Sub Class: 0 Protocol: 0 Number of Endpoints: 1 Endpoint Address: 81 Direction: in Attribute: 1 Type: Isoc Max Packet Size: 128 Interval: 1ms Interface Number: 0 Name: (none) Alternate Number: 2 Class: ff(vend.) Sub Class: 0 Protocol: 0 Number of Endpoints: 1 Endpoint Address: 81 Direction: in Attribute: 1 Type: Isoc Max Packet Size: 384 Interval: 1ms Interface Number: 0 Name: (none) Alternate Number: 3 Class: ff(vend.) Sub Class: 0 Protocol: 0 Number of Endpoints: 1 Endpoint Address: 81 Direction: in Attribute: 1 Type: Isoc Max Packet Size: 512 Interval: 1ms Interface Number: 0 Name: (none) Alternate Number: 4 Class: ff(vend.) Sub Class: 0 Protocol: 0 Number of Endpoints: 1 Endpoint Address: 81 Direction: in Attribute: 1 Type: Isoc Max Packet Size: 640 Interval: 1ms Interface Number: 0 Name: (none) Alternate Number: 5 Class: ff(vend.) Sub Class: 0 Protocol: 0 Number of Endpoints: 1 Endpoint Address: 81 Direction: in Attribute: 1 Type: Isoc Max Packet Size: 768 Interval: 1ms Interface Number: 0 Name: (none) Alternate Number: 6 Class: ff(vend.) Sub Class: 0 Protocol: 0 Number of Endpoints: 1 Endpoint Address: 81 Direction: in Attribute: 1 Type: Isoc Max Packet Size: 896 Interval: 1ms Interface Number: 0 Name: (none) Alternate Number: 7 Class: ff(vend.) Sub Class: 0 Protocol: 0 Number of Endpoints: 1 Endpoint Address: 81 Direction: in Attribute: 1 Type: Isoc Max Packet Size: 1023 Interval: 1ms Interface Number: 1 Name: (none) Alternate Number: 0 Class: ff(vend.) Sub Class: 0 Protocol: 0 Number of Endpoints: 3 Endpoint Address: 82 Direction: in Attribute: 2 Type: Bulk Max Packet Size: 64 Interval: 0ms Endpoint Address: 03 Direction: out Attribute: 2 Type: Bulk Max Packet Size: 64 Interval: 0ms Endpoint Address: 84 Direction: in Attribute: 3 Type: Int. Max Packet Size: 1 Interval: 1ms Pero al intentar montar me dice que no hay nada xuvenka:/# mount -t vfat /dev/sda1 /mnt mount: /dev/sda1 is not a valid block device xuvenka:/# mount -t vfat /dev/sda2 /mnt mount: /dev/sda2 is not a valid block device xuvenka:/# mount -t vfat /dev/sdb1 /mnt mount: /dev/sdb1 is not a valid block device xuvenka:/#¿Se puede conseguir algo? ¿o es mejor que lo deje para cuando alguien que sepa más lo haga?