[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

errores en dmesg



Hola,

¿alguien sabe que significan estos mensajes de error al hacer un "dmesg"?

Memory: sized by int13 088h
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000f0280
pcibios_init : BIOS32 Service Directory entry at 0xf0210
pcibios_init : PCI BIOS revision 2.10 entry at 0xf0200
Probing PCI hardware.
Calibrating delay loop.. ok - 265.42 BogoMIPS
Memory: 95668k/98304k available (608k kernel code, 384k reserved, 1644k
data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Linux version 2.0.36 (root@proxy3) (gcc version 2.7.2.3) #8 Tue Mar 16
09:34:51
CET 1999
Starting kswapd v 1.4.2.2
ide: i82371 PIIX (Triton) on PCI bus 0 function 57
    ide0: BM-DMA at 0x7470-0x7477
    ide1: BM-DMA at 0x7478-0x747f
hda: FUJITSU MPB3032ATU, 3093MB w/0kB Cache, CHS=785/128/63, DMA
hdc: MATSHITA CR-585, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
eepro100.c:v0.99B 4/7/98 Donald Becker linux-eepro100@cesdis.gsfc.nasa.gov
eth0: Intel EtherExpress Pro 10/100 at 0x7400, 00:90:27:1F:E7:52, IRQ 10.
  Board assembly 701738-003, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x24c9f043).
  Receiver lock-up workaround activated.
eth1: Intel EtherExpress Pro 10/100 at 0x7440, 00:90:27:1F:DE:9B, IRQ 9.
  Board assembly 701738-003, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x24c9f043).
  Receiver lock-up workaround activated.
eepro100.c:v0.99B 4/7/98 Donald Becker linux-eepro100@cesdis.gsfc.nasa.gov
Partition check:
 hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 130748k swap-space (priority -1)
Unable to handle kernel paging request at virtual address c68195e7
current->tss.cr3 = 058ea000, %cr3 = 058ea000
*pde = 0009e067
*pte = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<068195e7>]
EFLAGS: 00010246
eax: 00000000   ebx: 00000100   ecx: 0681956c   edx: 00000000
esi: 058d9f24   edi: 0000002b   ebp: 05969e98   esp: 05a91ff8
ds: 0018   es: 0018   fs: 002b   gs: 002b   ss: 0018
Process insmod (pid: 35, process nr: 14, stackpage=05a91000)
Stack: 0681956c 05a8e018
Call Trace: [<0681956c>]
Code: <1>Unable to handle kernel paging request at virtual address c68195e7
current->tss.cr3 = 058ea000, %cr3 = 058ea000
*pde = 0009e067
*pte = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<0010aee0>]
EFLAGS: 00010202
eax: 00000010   ebx: 05a8e018   ecx: 068195e7   edx: 0000ea60
esi: 00000000   edi: 05a92000   ebp: 05a91fbc   esp: 05a91f60
ds: 0018   es: 0018   fs: 0010   gs: 002b   ss: 0018
Process insmod (pid: 35, process nr: 14, stackpage=05a91000)
Stack: 0019002b 00000000 00019000 05a91fbc 056f0018 06800000 07000000
06800000
       056f0018 00111d02 00196486 05a91fbc 00000000 00111a34 058d9f24
0000002b
       05969e98 00000000 05eebc18 00000000 0010ab48 05a91fbc 00000000
00000100
Call Trace: [<0019002b>] [<06800000>] [<07000000>] [<06800000>] [<00111d02>]
[<0
0111a34>] [<0010ab48>]
       [<0681956c>] [<06810018>] [<068195e7>] [<0681956c>]
Code: 64 8a 04 0e 0f a1 88 c2 81 e2 ff 00 00 00 89 54 24 10 52 68
Unable to handle kernel paging request at virtual address c68195fe
current->tss.cr3 = 058ea000, %cr3 = 058ea000
*pde = 0009e067
*pte = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<068195fe>]
EFLAGS: 00010246
eax: 00000000   ebx: 00000100   ecx: 0681956c   edx: 00000000
esi: 058d9f24   edi: 0000002b   ebp: 05969e98   esp: 05a9eff8
ds: 0018   es: 0018   fs: 002b   gs: 002b   ss: 0018
Process insmod (pid: 36, process nr: 16, stackpage=05a9e000)
Stack: 0681956c 05a8e018
Call Trace: [<0681956c>]
Code: ff ff 89 c3 83 c4 04 85 db 74 1d c7 86 b4 02 00 00 01 00 00
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
hdc: media changed
VFS: Disk change detected on device 16:00
ISO9660 Extensions: Microsoft Joliet Level 3
Max size:312264   Log zone size:2048
First datazone:28   Root inode number 57344
ISO9660 Extensions: RRIP_1991A

Un saludo para todos.
     _  ____ ____ __  __
    | |/ ___/ ___|  \/  | José Illescas. E-Mail: pepus@jccm.es AOLScreen:
yoburtu
 _  | | |  | |   | |\/| | TFNO: +34+25-266219 FAX: +34+25-266300
| |_| | |__| |___| |  | | El Webteam de http://www.jccm.es
 \___/ \____\____|_|  |_| Junta de Castilla-La Mancha. E-Mail:
webmaster@jccm.es


Reply to: