Re: 3 monitores
o módulo i915 está carregado:
$ lsmod | grep 915
i915 223022 2
drm_kms_helper 18569 1 i915
drm 112053 3 i915,drm_kms_helper
i2c_algo_bit 3493 1 i915
video 14605 1 i915
i2c_core 12787 5 i915,drm_kms_helper,drm,i2c_algo_bit,videodev
button 3598 1 i915
mas como faço para ter certeza que o módulo da minha placa é o i915?
Em 11/09/12, Fred Maranhão<fred.maranhao@gmail.com> escreveu:
> Caros,
>
> tenho um laptop hp ProBook 4320s com Debian stable
>
> ele tem uma saída VGA e uma saída HDMI.
>
> Tenho um monitor Goldstar ligado na VGA e um AOC ligado na HDMI,
> através de um cabo HDMI - DVI-D.
>
> eu consigo todas as combinações de 2 monitores possíveis:
>
> monitor do laptop + Goldstar
> mointor do laptop + AOC
> Goldstar + AOC
>
> tudo configurando pelo gnome-display-properties. Rápido e simples. E
> com tela extendida (não é clonada).
>
> Mas quando eu tento ligar as três telas juntas, no
> gnome-display-properties, aparece a mensagem:
>
> "A configuração escolhida para o(s) vídeo(s) não pôde ser aplicada
> não foi possível encontrar configuração de tela adequadas"
>
> acompanhei o /var/log/Xorg.0.log
>
> quando eu abro o gnome-display-properties (com o monitor do laptop e o
> goldstar ativos), escreve isto no arquivo:
> ===========================================
> (II) intel(0): EDID vendor "GSM", prod id 19345
> (II) intel(0): Using hsync ranges from config file
> (II) intel(0): Using vrefresh ranges from config file
> (II) intel(0): Printing DDC gathered Modelines:
> (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792
> 768 771 777 795 +hsync +vsync (47.7 kHz)
> (II) intel(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664
> 768 771 778 798 -hsync +vsync (47.8 kHz)
> (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600
> 601 605 628 +hsync +vsync (37.9 kHz)
> (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480
> 481 484 500 -hsync -vsync (37.5 kHz)
> (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480
> 490 492 525 -hsync -vsync (31.5 kHz)
> (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400
> 412 414 449 -hsync +vsync (31.5 kHz)
> (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312
> 768 769 772 800 +hsync +vsync (60.0 kHz)
> (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344
> 768 771 777 806 -hsync -vsync (48.4 kHz)
> (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624
> 625 628 667 -hsync -vsync (49.7 kHz)
> (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600
> 601 604 625 +hsync +vsync (46.9 kHz)
> ===========================================
>
>
> quando eu desativo o goldstar, deixando apenas o monitor do laptop,
> aparece isto:
>
> ===========================================
> (II) intel(0): EDID vendor "GSM", prod id 19345
> (II) intel(0): Using hsync ranges from config file
> (II) intel(0): Using vrefresh ranges from config file
> (II) intel(0): Printing DDC gathered Modelines:
> (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792
> 768 771 777 795 +hsync +vsync (47.7 kHz)
> (II) intel(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664
> 768 771 778 798 -hsync +vsync (47.8 kHz)
> (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600
> 601 605 628 +hsync +vsync (37.9 kHz)
> (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480
> 481 484 500 -hsync -vsync (37.5 kHz)
> (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480
> 490 492 525 -hsync -vsync (31.5 kHz)
> (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400
> 412 414 449 -hsync +vsync (31.5 kHz)
> (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312
> 768 769 772 800 +hsync +vsync (60.0 kHz)
> (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344
> 768 771 777 806 -hsync -vsync (48.4 kHz)
> (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624
> 625 628 667 -hsync -vsync (49.7 kHz)
> (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600
> 601 604 625 +hsync +vsync (46.9 kHz)
> (II) intel(0): EDID vendor "GSM", prod id 19345
> (II) intel(0): Using hsync ranges from config file
> (II) intel(0): Using vrefresh ranges from config file
> (II) intel(0): Printing DDC gathered Modelines:
> (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792
> 768 771 777 795 +hsync +vsync (47.7 kHz)
> (II) intel(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664
> 768 771 778 798 -hsync +vsync (47.8 kHz)
> (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600
> 601 605 628 +hsync +vsync (37.9 kHz)
> (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480
> 481 484 500 -hsync -vsync (37.5 kHz)
> (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480
> 490 492 525 -hsync -vsync (31.5 kHz)
> (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400
> 412 414 449 -hsync +vsync (31.5 kHz)
> (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312
> 768 769 772 800 +hsync +vsync (60.0 kHz)
> (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344
> 768 771 777 806 -hsync -vsync (48.4 kHz)
> (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624
> 625 628 667 -hsync -vsync (49.7 kHz)
> (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600
> 601 604 625 +hsync +vsync (46.9 kHz)
> (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
> ===========================================
>
> quando eu reativo o goldstar, aparece isto:
>
> ===========================================
> (II) intel(0): EDID vendor "GSM", prod id 19345
> (II) intel(0): Using hsync ranges from config file
> (II) intel(0): Using vrefresh ranges from config file
> (II) intel(0): Printing DDC gathered Modelines:
> (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792
> 768 771 777 795 +hsync +vsync (47.7 kHz)
> (II) intel(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664
> 768 771 778 798 -hsync +vsync (47.8 kHz)
> (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600
> 601 605 628 +hsync +vsync (37.9 kHz)
> (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480
> 481 484 500 -hsync -vsync (37.5 kHz)
> (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480
> 490 492 525 -hsync -vsync (31.5 kHz)
> (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400
> 412 414 449 -hsync +vsync (31.5 kHz)
> (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312
> 768 769 772 800 +hsync +vsync (60.0 kHz)
> (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344
> 768 771 777 806 -hsync -vsync (48.4 kHz)
> (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624
> 625 628 667 -hsync -vsync (49.7 kHz)
> (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600
> 601 604 625 +hsync +vsync (46.9 kHz)
> (II) intel(0): EDID vendor "LGD", prod id 474
> (II) intel(0): Printing DDC gathered Modelines:
> (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462
> 768 771 777 790 -hsync -vsync (47.4 kHz)
> (II) intel(0): Allocated new frame buffer 2752x768 stride 11264, tiled
> ===========================================
>
> ao tentar ativar o terceiro (o AOC), aparece isto:
>
> ===========================================
> (II) intel(0): EDID vendor "LGD", prod id 474
> (II) intel(0): Printing DDC gathered Modelines:
> (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462
> 768 771 777 790 -hsync -vsync (47.4 kHz)
> (II) intel(0): EDID vendor "GSM", prod id 19345
> (II) intel(0): Using hsync ranges from config file
> (II) intel(0): Using vrefresh ranges from config file
> (II) intel(0): Printing DDC gathered Modelines:
> (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792
> 768 771 777 795 +hsync +vsync (47.7 kHz)
> (II) intel(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664
> 768 771 778 798 -hsync +vsync (47.8 kHz)
> (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600
> 601 605 628 +hsync +vsync (37.9 kHz)
> (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480
> 481 484 500 -hsync -vsync (37.5 kHz)
> (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480
> 490 492 525 -hsync -vsync (31.5 kHz)
> (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400
> 412 414 449 -hsync +vsync (31.5 kHz)
> (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312
> 768 769 772 800 +hsync +vsync (60.0 kHz)
> (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344
> 768 771 777 806 -hsync -vsync (48.4 kHz)
> (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624
> 625 628 667 -hsync -vsync (49.7 kHz)
> (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600
> 601 604 625 +hsync +vsync (46.9 kHz)
> ===========================================
>
> aparece também a mensagem de erro "A configuração escolhida..." que já
> citei acima. e nada no terceiro monitor. embora no
> gnome-display-settings fique mostrado os 3 monitores como ativos.
>
> Também tentei configurar pelo grandr, mas deu na mesma. tentei sair do
> gnome e ir para o xfce, mas o gerenciador de monitores do xfce4 só
> enxerga um monitor.
>
> tentei no blackbox com o grandr e tambem nada.
>
> a saída do lspci:
> ===========================================
> $ lspci
> 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev
> 02)
> 00:02.0 VGA compatible controller: Intel Corporation Core Processor
> Integrated Graphics Controller (rev 02)
> 00:16.0 Communication controller: Intel Corporation 5 Series/3400
> Series Chipset HECI Controller (rev 06)
> 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset
> USB2 Enhanced Host Controller (rev 05)
> 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset
> High Definition Audio (rev 05)
> 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
> Express Root Port 1 (rev 05)
> 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
> Express Root Port 2 (rev 05)
> 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
> Express Root Port 4 (rev 05)
> 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
> Express Root Port 6 (rev 05)
> 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset
> USB2 Enhanced Host Controller (rev 05)
> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
> 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC
> Interface Controller (rev 05)
> 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series
> Chipset 6 port SATA AHCI Controller (rev 05)
> 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400
> Series Chipset Thermal Subsystem (rev 05)
> 43:00.0 Network controller: Atheros Communications Inc. AR9285
> Wireless Network Adapter (PCI-Express) (rev 01)
> 44:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
> ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath
> Architecture Generic Non-core Registers (rev 02)
> ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath
> Architecture System Address Decoder (rev 02)
> ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
> ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev
> 02)
> ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
> ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
> ===========================================
>
> Alguém tem alguma sugestão? Não gostaria de migrar para o testing para
> testar, mas pode ser uma opção. ou testing ou backports.
>
> Fred
>
Reply to:
- References:
- 3 monitores
- From: Fred Maranhão <fred.maranhao@gmail.com>