On Fri, Oct 7, 2011 at 2:56 PM, Marcelo Castilho Manzano
<manzano.marcelo@gmail.com> wrote:
Obrigado a todos!
abaixo em negrito alguns detalhes do meu PC:
Uma observacao minha,
Reinstalei o Debian no meu laptop "Toshiba satellite A30" e DESmarquei a opcao que diz:
The following linux kernel modules were detected as matching your hardware. If you know some are unnecessary, or cause problems, you can choose not to load them. If you are unsure, you should leave them all selected.
Modules to Load:
[*] usb-storage (usb storage)
<continue>
Terminal aberto e pingando http://www.bbc.co.uk
Se eu mexo o mouse ele continua a trabalhar e mostrar as proximas linhas do ping com os proximos tempos de resposta do ping.
No exato momento que eu paro de mexer o mouse ele PARA de me mostrar as proximas linhas do ping...engracado e que ele nao congela tipo travar...ele fica so parado...posso demorar 10 minutos sem mexer no mouse que ele fica parado sem trabalhar...quando eu mexo no mouse ele o ping comeca a trabalhar de novo..reparei a mesma coisa quando estava instalando um novo pacote....se eu paro de mexer o mouse ele pra no meio da instalacao, se eu vou mexendo o mouse a instalacao vai continuando ate acabar normalmente...
::::::MEU COMPUTADOR::::::
CPU Type : Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz
Kernel version : Linux 2.6.32-5-686 i686
Total memory : 481084 kB
::::::INFO FILE SYSTEM::::::
Filesystem Size Used Avail Use% Mounted on
/dev/sda5 14G 3.1G 9.4G 25% /
tmpfs 235M 0 235M 0% /lib/init/rw
udev 231M 192K 231M 1% /dev
tmpfs 235M 0 235M 0% /dev/shm
::::::DMESG::::::
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-35squeeze2) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Sep 9 20:51:05 UTC 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001dee0000 (usable)
[ 0.000000] BIOS-e820: 000000001dee0000 - 000000001deeb000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001deeb000 - 000000001df00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001df00000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x1dee0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01DF00000 mask FFFF00000 uncachable
[ 0.000000] 2 base 01E000000 mask FFE000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001dee0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001dc00000 page 2M
[ 0.000000] 001dc00000 - 001dee0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1dee0000 @ 7000-d000
[ 0.000000] RAMDISK: 15f29000 - 16767f57
[ 0.000000] ACPI: RSDP 000f6c70 00014 (v00 TOSCPL)
[ 0.000000] ACPI: RSDT 1dee59da 0002C (v01 TOSCPL RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 1deeaf3c 00074 (v01 TOSCPL MONTARA 06040000 PTL 00000050)
[ 0.000000] ACPI: DSDT 1dee5a06 05536 (v01 TOSCPL MONTARAG 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 1defbfc0 00040
[ 0.000000] ACPI: APIC 1deeafb0 00050 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 478MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1dee0000
[ 0.000000] low ram: 0 - 1dee0000
[ 0.000000] node 0 low ram: 00000000 - 1dee0000
[ 0.000000] node 0 bootmap 00002000 - 00005bdc
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001dee0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014ccbd4] TEXT DATA BSS ==> [0001000000 - 00014ccbd4]
[ 0.000000] #4 [0015f29000 - 0016767f57] RAMDISK ==> [0015f29000 - 0016767f57]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [00014cd000 - 00014d30fc] BRK ==> [00014cd000 - 00014d30fc]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
[ 0.000000] found SMP MP-table at [c00f6ca0] f6ca0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001dee0
[ 0.000000] HighMem 0x0001dee0 -> 0x0001dee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001dee0
[ 0.000000] On node 0 totalpages: 122495
[ 0.000000] free_area_init_node: node 0, pgdat c13b4860, node_mem_map c14d5000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 926 pages used for memmap
[ 0.000000] Normal zone: 117570 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s34328 r0 d23016 u4194304
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121537
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=df49fbb7-46a8-4bb2-a17e-f7eb88a82dae ro quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 471896k/490368k available (2503k kernel code, 17732k reserved, 1329k data, 380k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xde6e0000 - 0xff3fe000 ( 525 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xddee0000 ( 478 MB)
[ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
[ 0.000000] .data : 0xc1271d79 - 0xc13be480 (1329 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1271d79 (2503 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2797.610 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5595.22 BogoMIPS (lpj=11190440)
[ 0.004027] Security Framework initialized
[ 0.004033] SELinux: Disabled at boot.
[ 0.004041] Mount-cache hash table entries: 512
[ 0.004185] Initializing cgroup subsys ns
[ 0.004190] Initializing cgroup subsys cpuacct
[ 0.004195] Initializing cgroup subsys devices
[ 0.004198] Initializing cgroup subsys freezer
[ 0.004201] Initializing cgroup subsys net_cls
[ 0.004230] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004234] CPU: L2 cache: 512K
[ 0.004237] CPU: Hyper-Threading is disabled
[ 0.004241] mce: CPU supports 4 MCE banks
[ 0.004248] Disabling lock debugging due to kernel taint
[ 0.004257] CPU0: Thermal monitoring enabled (TM1)
[ 0.004271] Performance Events: no PMU driver, software events only.
[ 0.004279] Checking 'hlt' instruction... OK.
[ 0.020432] SMP alternatives: switching to UP code
[ 0.026461] Freeing SMP alternatives: 13k freed
[ 0.026477] ACPI: Core revision 20090903
[ 0.036085] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036527] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.040001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.040001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.040001] ..... (found apic 0 pin 0) ...
[ 0.083352] ....... works.
[ 0.083355] CPU0: Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
[ 0.084001] Brought up 1 CPUs
[ 0.084001] Total of 1 processors activated (5595.22 BogoMIPS).
[ 0.084001] CPU0 attaching NULL sched-domain.
[ 0.084001] devtmpfs: initialized
[ 0.084001] regulator: core version 0.5
[ 0.084001] NET: Registered protocol family 16
[ 0.084001] ACPI: bus type pci registered
[ 0.084001] PCI: PCI BIOS revision 2.10 entry at 0xfd9b2, last bus=2
[ 0.084001] PCI: Using configuration type 1 for base access
[ 0.084001] bio: create slab <bio-0> at 0
[ 0.084001] ACPI: EC: Look up EC in DSDT
[ 0.086159] ACPI: Interpreter enabled
[ 0.086164] ACPI: (supports S0 S3 S4 S5)
[ 0.086186] ACPI: Using IOAPIC for interrupt routing
[ 0.129109] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = "">[ 0.129276] ACPI: No dock devices found.
[ 0.130078] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.130233] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.130240] pci 0000:00:02.0: reg 14 32bit mmio: [0xe0000000-0xe007ffff]
[ 0.130246] pci 0000:00:02.0: reg 18 io port: [0x1800-0x1807]
[ 0.130267] pci 0000:00:02.0: supports D1
[ 0.130288] pci 0000:00:02.1: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.130294] pci 0000:00:02.1: reg 14 32bit mmio: [0xe0080000-0xe00fffff]
[ 0.130317] pci 0000:00:02.1: supports D1
[ 0.130392] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.130446] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.130498] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.130557] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe0100000-0xe01003ff]
[ 0.130612] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.130617] pci 0000:00:1d.7: PME# disabled
[ 0.130704] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.130710] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.130734] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.130741] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.130749] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.130756] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.130763] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.130771] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.130821] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
[ 0.130864] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
[ 0.130871] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
[ 0.130878] pci 0000:00:1f.5: reg 18 32bit mmio: [0xe0100c00-0xe0100dff]
[ 0.130885] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xe0100800-0xe01008ff]
[ 0.130913] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.130918] pci 0000:00:1f.5: PME# disabled
[ 0.130951] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
[ 0.130958] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
[ 0.130993] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.130998] pci 0000:00:1f.6: PME# disabled
[ 0.131038] pci 0000:02:00.0: reg 10 32bit mmio: [0xe0200000-0xe02007ff]
[ 0.131045] pci 0000:02:00.0: reg 14 io port: [0x3400-0x347f]
[ 0.131083] pci 0000:02:00.0: supports D2
[ 0.131086] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
[ 0.131090] pci 0000:02:00.0: PME# disabled
[ 0.131126] pci 0000:02:01.0: reg 10 io port: [0x3000-0x30ff]
[ 0.131134] pci 0000:02:01.0: reg 14 32bit mmio: [0xe0200800-0xe02008ff]
[ 0.131170] pci 0000:02:01.0: supports D1 D2
[ 0.131173] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.131178] pci 0000:02:01.0: PME# disabled
[ 0.131215] pci 0000:02:04.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.131233] pci 0000:02:04.0: supports D1 D2
[ 0.131235] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.131240] pci 0000:02:04.0: PME# disabled
[ 0.131279] pci 0000:00:1e.0: transparent bridge
[ 0.131284] pci 0000:00:1e.0: bridge io port: [0x3000-0x3fff]
[ 0.131289] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0200000-0xe02fffff]
[ 0.131315] pci_bus 0000:00: on NUMA node 0
[ 0.131320] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.131441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.136472] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[ 0.136580] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 0.136685] ACPI: PCI Interrupt Link [LNKC] (IRQs 5) *9
[ 0.136791] ACPI: PCI Interrupt Link [LNKD] (IRQs 5) *9
[ 0.136896] ACPI: PCI Interrupt Link [LNKE] (IRQs 7 11) *9
[ 0.137003] ACPI: PCI Interrupt Link [LNKF] (IRQs 7 11) *9
[ 0.137108] ACPI: PCI Interrupt Link [LNKG] (IRQs 7 11) *0, disabled.
[ 0.137216] ACPI: PCI Interrupt Link [LNKH] (IRQs 5) *9
[ 0.137328] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.137338] vgaarb: loaded
[ 0.137431] PCI: Using ACPI for IRQ routing
[ 0.137647] Switching to clocksource tsc
[ 0.139122] pnp: PnP ACPI init
[ 0.139143] ACPI: bus type pnp registered
[ 0.158446] pnp: PnP ACPI: found 9 devices
[ 0.158449] ACPI: ACPI bus type pnp unregistered
[ 0.158454] PnPBIOS: Disabled by ACPI PNP
[ 0.158471] system 00:04: ioport range 0x600-0x60f has been reserved
[ 0.158474] system 00:04: ioport range 0x700-0x70f has been reserved
[ 0.158478] system 00:04: ioport range 0x800-0x80f has been reserved
[ 0.158482] system 00:04: ioport range 0x1000-0x107f has been reserved
[ 0.158486] system 00:04: ioport range 0x1180-0x11bf has been reserved
[ 0.158489] system 00:04: ioport range 0x200-0x20f has been reserved
[ 0.158494] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[ 0.158499] system 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved
[ 0.193273] pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03
[ 0.193277] pci 0000:02:04.0: IO window: 0x003800-0x0038ff
[ 0.193282] pci 0000:02:04.0: IO window: 0x003c00-0x003cff
[ 0.193287] pci 0000:02:04.0: PREFETCH window: 0x20000000-0x23ffffff
[ 0.193292] pci 0000:02:04.0: MEM window: 0x28000000-0x2bffffff
[ 0.193298] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.193302] pci 0000:00:1e.0: IO window: 0x3000-0x3fff
[ 0.193308] pci 0000:00:1e.0: MEM window: 0xe0200000-0xe02fffff
[ 0.193313] pci 0000:00:1e.0: PREFETCH window: 0x20000000-0x23ffffff
[ 0.193329] pci 0000:00:1e.0: setting latency timer to 64
[ 0.193345] pci 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.193353] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.193356] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.193360] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
[ 0.193363] pci_bus 0000:02: resource 1 mem: [0xe0200000-0xe02fffff]
[ 0.193366] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x23ffffff]
[ 0.193369] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.193373] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.193376] pci_bus 0000:03: resource 0 io: [0x3800-0x38ff]
[ 0.193379] pci_bus 0000:03: resource 1 io: [0x3c00-0x3cff]
[ 0.193382] pci_bus 0000:03: resource 2 pref mem [0x20000000-0x23ffffff]
[ 0.193386] pci_bus 0000:03: resource 3 mem: [0x28000000-0x2bffffff]
[ 0.193427] NET: Registered protocol family 2
[ 0.193532] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.193858] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.193948] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.194030] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.194033] TCP reno registered
[ 0.194108] NET: Registered protocol family 1
[ 0.194134] pci 0000:00:02.0: Boot video device
[ 0.194269] Unpacking initramfs...
[ 0.498649] Freeing initrd memory: 8443k freed
[ 0.508705] audit: initializing netlink socket (disabled)
[ 0.508727] type=2000 audit(1317994542.506:1): initialized
[ 0.511697] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.513176] VFS: Disk quotas dquot_6.5.2
[ 0.513239] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.513328] msgmni has been set to 938
[ 0.513553] alg: No test for stdrng (krng)
[ 0.513615] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.513618] io scheduler noop registered
[ 0.513621] io scheduler anticipatory registered
[ 0.513623] io scheduler deadline registered
[ 0.513667] io scheduler cfq registered (default)
[ 0.513855] isapnp: Scanning for PnP cards...
[ 0.867550] isapnp: No Plug & Play device found
[ 0.869154] Linux agpgart interface v0.103
[ 0.869234] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[ 0.869407] agpgart-intel 0000:00:00.0: detected 32636K stolen memory
[ 0.870516] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 0.870596] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.870934] serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.870940] serial 0000:00:1f.6: PCI INT B disabled
[ 0.871029] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.878396] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.885985] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.885996] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.886032] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.886063] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.886090] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.886201] mice: PS/2 mouse device common for all mice
[ 0.886253] rtc_cmos 00:01: RTC can wake from S4
[ 0.886295] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.886317] rtc0: alarms up to one month, y3k, 242 bytes nvram
[ 0.886331] cpuidle: using governor ladder
[ 0.886334] cpuidle: using governor menu
[ 0.886347] No iBFT detected.
[ 0.886792] TCP cubic registered
[ 0.886924] NET: Registered protocol family 10
[ 0.887811] Mobile IPv6
[ 0.887814] NET: Registered protocol family 17
[ 0.887836] Using IPI No-Shortcut mode
[ 0.887923] PM: Resume from disk failed.
[ 0.887936] registered taskstats version 1
[ 0.888197] rtc_cmos 00:01: setting system clock to 2011-10-07 13:35:43 UTC (1317994543)
[ 0.888260] Initalizing network drop monitor service
[ 0.888291] Freeing unused kernel memory: 380k freed
[ 0.888727] Write protecting the kernel text: 2504k
[ 0.888745] Write protecting the kernel read-only data: 924k
[ 0.911173] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.913232] udev[46]: starting version 164
[ 1.176999] usbcore: registered new interface driver usbfs
[ 1.177205] usbcore: registered new interface driver hub
[ 1.177404] usbcore: registered new device driver usb
[ 1.182248] SCSI subsystem initialized
[ 1.221551] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.221601] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.221628] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.221633] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.221662] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.221710] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.225602] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 1.225620] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0100000
[ 1.235722] firewire_ohci 0000:02:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.238823] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.238876] libata version 3.00 loaded.
[ 1.243536] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.243568] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.243572] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.243575] usb usb1: Product: EHCI Host Controller
[ 1.243578] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.243580] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.243700] usb usb1: configuration #1 chosen from 1 choice
[ 1.243739] hub 1-0:1.0: USB hub found
[ 1.243751] hub 1-0:1.0: 6 ports detected
[ 1.244793] FDC 0 is a post-1991 82077
[ 1.246557] ata_piix 0000:00:1f.1: version 2.13
[ 1.246573] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.246588] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.246647] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.247810] scsi0 : ata_piix
[ 1.248695] scsi1 : ata_piix
[ 1.250010] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.250015] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.299639] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.299708] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.299719] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.299724] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.299741] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.299779] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
[ 1.299825] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.299828] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.299832] usb usb2: Product: UHCI Host Controller
[ 1.299834] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.299837] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.300035] usb usb2: configuration #1 chosen from 1 choice
[ 1.300118] hub 2-0:1.0: USB hub found
[ 1.300130] hub 2-0:1.0: 2 ports detected
[ 1.300199] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.300209] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.300214] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.300223] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.300255] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.300295] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.300299] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.300302] usb usb3: Product: UHCI Host Controller
[ 1.300304] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.300307] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.300451] usb usb3: configuration #1 chosen from 1 choice
[ 1.300525] hub 3-0:1.0: USB hub found
[ 1.300543] hub 3-0:1.0: 2 ports detected
[ 1.300603] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.300612] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.300616] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.300626] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.300656] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.300698] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.300701] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.300705] usb usb4: Product: UHCI Host Controller
[ 1.300707] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.300710] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.300842] usb usb4: configuration #1 chosen from 1 choice
[ 1.300914] hub 4-0:1.0: USB hub found
[ 1.300925] hub 4-0:1.0: 2 ports detected
[ 1.312009] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI version 1.10
[ 1.312081] 8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.416516] ata2.00: ATAPI: DW-224E-A, F.2A, max UDMA/33
[ 1.416762] ata1.00: ATA-5: TOSHIBA MK3021GAS, GA124A, max UDMA/100
[ 1.416767] ata1.00: 58605120 sectors, multi 16: LBA
[ 1.424296] ata2.00: configured for UDMA/33
[ 1.424494] ata1.00: configured for UDMA/100
[ 1.424638] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3021GA GA12 PQ: 0 ANSI: 5
[ 1.425778] scsi 1:0:0:0: CD-ROM TEAC DW-224E-A F.2A PQ: 0 ANSI: 5
[ 1.433283] 8139too Fast Ethernet driver 0.9.28
[ 1.433335] 8139too 0000:02:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.437860] eth0: RealTek RTL8139 at 0x3000, 00:02:3f:95:07:d0, IRQ 21
[ 1.457104] sd 0:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB)
[ 1.457171] sd 0:0:0:0: [sda] Write Protect is off
[ 1.457175] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.457203] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.457383] sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.460268] Uniform CD-ROM driver Revision: 3.20
[ 1.460688] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.531061] sda1 sda2 < sda5 sda6 >
[ 1.580767] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.598594] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.599127] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.812123] firewire_core: created device fw0: GUID 00023f39410013e0, S400
[ 2.326152] PM: Starting manual resume from disk
[ 2.326158] PM: Resume from partition 8:6
[ 2.326160] PM: Checking hibernation image.
[ 2.326392] PM: Error -22 checking image file
[ 2.326395] PM: Resume from disk failed.
[ 2.348244] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 2.348249] EXT3-fs: write access will be enabled during recovery.
[ 2.382031] kjournald starting. Commit interval 5 seconds
[ 2.382041] EXT3-fs: recovery complete.
[ 2.382936] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.963264] udev[297]: starting version 164
[ 5.543999] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input1
[ 5.544032] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 5.953580] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.966273] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.044502] ACPI: Battery Slot [BAT1] (battery present)
[ 6.099512] ACPI: AC Adapter [ACAD] (off-line)
[ 6.130124] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.130133] ACPI: I/O resource 0000:00:1f.3 [0x1880-0x189f] conflicts with ACPI region SBUS [0x1880-0x188f]
[ 6.130182] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.231606] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 6.231850] ACPI: Lid Switch [LID]
[ 6.232463] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 6.232623] ACPI: Power Button [PWRB]
[ 6.232775] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.232851] ACPI: Power Button [PWRF]
[ 6.479806] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input5
[ 6.501026] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input6
[ 6.782318] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 6.782912] Marking TSC unstable due to TSC halts in idle
[ 6.784073] processor LNXCPU:00: registered as cooling_device0
[ 6.784699] Switching to clocksource acpi_pm
[ 6.927464] intel_rng: FWH not detected
[ 7.045017] [drm] Initialized drm 1.1.0 20060810
[ 7.085076] yenta_cardbus 0000:02:04.0: CardBus bridge found [1179:ff00]
[ 7.085095] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
[ 7.085098] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[ 7.085104] yenta_cardbus 0000:02:04.0: TI: mfunc 0x00111c12, devctl 0x44
[ 7.316865] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0c38, PCI irq 16
[ 7.316870] yenta_cardbus 0000:02:04.0: Socket status: 30000006
[ 7.316875] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 7.316890] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 7.316895] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean.
[ 7.317211] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
[ 7.317216] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
[ 7.828086] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.828093] i915 0000:00:02.0: setting latency timer to 64
[ 7.832750] [drm] set up 31M of stolen space
[ 7.851129] [drm] initialized overlay support
[ 8.169304] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 8.170990] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 8.171727] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 8.172425] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 8.173215] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 8.683133] Console: switching to colour frame buffer device 128x48
[ 8.691418] fb0: inteldrmfb frame buffer device
[ 8.691421] registered panic notifier
[ 8.691531] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.691580] Intel ICH Modem 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.691609] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 8.944563] Unable to initialize codec #0
[ 8.944642] Intel ICH Modem 0000:00:1f.6: PCI INT B disabled
[ 8.944657] Intel ICH Modem: probe of 0000:00:1f.6 failed with error -13
[ 8.945388] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.945430] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 9.268028] intel8x0_measure_ac97_clock: measured 55135 usecs (2656 samples)
[ 9.268033] intel8x0: clocking to 48000
[ 10.650889] Adding 646136k swap on /dev/sda6. Priority:-1 extents:1 across:646136k
[ 10.944312] EXT3 FS on sda5, internal journal
[ 11.246904] loop: module loaded
[ 12.804672] fuse init (API version 7.13)
[ 14.844885] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8
[ 17.104672] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 19.455517] apm: BIOS not found.
[ 21.106828] Bluetooth: Core ver 2.15
[ 21.106921] NET: Registered protocol family 31
[ 21.106924] Bluetooth: HCI device and connection manager initialized
[ 21.106928] Bluetooth: HCI socket layer initialized
[ 21.566309] Bluetooth: L2CAP ver 2.14
[ 21.566313] Bluetooth: L2CAP socket layer initialized
[ 21.624666] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.624670] Bluetooth: BNEP filters: protocol multicast
[ 21.626619] Bluetooth: RFCOMM TTY layer initialized
[ 21.626625] Bluetooth: RFCOMM socket layer initialized
[ 21.626628] Bluetooth: RFCOMM ver 1.11
[ 21.921566] Bridge firewalling registered
[ 22.253286] Bluetooth: SCO (Voice Link) ver 0.6
[ 22.253289] Bluetooth: SCO socket layer initialized
[ 25.253378] lp: driver loaded but no devices found
[ 25.288804] ppdev: user-space parallel port driver
[ 27.476015] eth0: no IPv6 routers present
[ 50.391489] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 55.913823] psmouse.c: GlidePoint at isa0060/serio4/input0 lost synchronization, throwing 3 bytes away.
[ 56.787962] psmouse.c: resync failed, issuing reconnect request
[ 300.324149] Machine check events logged
Obrigado a todos!!2011/10/5 Fernando Silva
<liquuid@liquuid.net>
On Wed, 5 Oct 2011 10:14:40 +0100, Marcelo Castilho Manzano <
manzano.marcelo@gmail.com> wrote:
Caros,
poderiam por gentileza me ajudar a fazer um troubleshooting do meu
Notebook Toshiba Satellite A30.
Tenho dual boot:
- Windows XP
- Debian
Quando ta rodando o XP roda numa boa, sem travar, fica horas
funcionando.
Quando ta rodando o "Debian 6.0.2.1" ele comeca a congelar, congelar,
congelar e no final trava de vez.
Estou voltando a estudar Linux agora.
Alguem poderia me dar uma ajuda nesse troubleshooting?
Quais saidas de comandos voces acham interessante eu enviar aqui pra
voces poderem ver e me ajudar a analisar?
Muito obrigado,
--
http://www.liquuid.net
--
|------------------------------------------------------------|
| Marcelo Ros Castilho |
| London - UK |
| Cel.07412 360 272 |
--
|------------------------------------------------------------|
| Marcelo Ros Castilho |
| London - UK |
| Cel.07412 360 272 |