[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Máquina não desliga sozinha com kernel 2.6.37



# lsmod | grep snd_hda_intel
snd_hda_intel          18596  4 
snd_hda_codec          52214  3 snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel
snd_pcm                60511  3 snd_hda_intel,snd_hda_codec
snd                    46670  14 snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
snd_page_alloc          6081  2 snd_hda_intel,snd_pcm

É, eu tenho o módulo ativo. Mas será que é por causa desse módulo? Porque o problema só ocorre no kernel 2.6.37 e desde o 2.6.33 a máquina nunca tinha congelado no desligamento mesmo com o módulo ativo.

Abraço

On Thu, 17 Feb 2011 21:56:13 -0400
Rodolfo <rof20004@gmail.com> wrote:

> SO mais um pedido, digite como root:
> 
> lsmod | grep snd_hda_intel
> 
> 
> quero saber se você usa esse modulo como driver de som. Algumas pessoas tem
> este tipo de problema ao usar o módulo acima citado.
> 
> 
> Abraços
> 
> Em 17 de fevereiro de 2011 21:43, André Luiz Fraga Moreira <
> andre4debian@gmail.com> escreveu:
> 
> > # dmesg | grep acpi
> > [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> > [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> > [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> > [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> > [    2.950953] ACPI: acpi_idle registered with cpuidle
> > [   26.675955] acpi device:30: registered as cooling_device2
> >
> >
> > Estou mandando também a saída usando a opção -i do grep, para mostrar mais
> > saídas referentes a acpi tanto em letras maiúsculas quanto em minúsculas de
> > forma a ficar mais detalhado.
> >
> > # dmesg | grep -i acpi
> > [    0.000000] ACPI: RSDP 00000000000fbc60 00024 (v02 DELL  )
> > [    0.000000] ACPI: XSDT 00000000bf66f200 00064 (v01 DELL    M08
> > 27D80A10 ASL  00000061)
> > [    0.000000] ACPI: FACP 00000000bf66f09c 000F4 (v04 DELL    M08
> > 27D80A10 ASL  00000061)
> > [    0.000000] ACPI: DSDT 00000000bf66f800 05477 (v02 INT430 SYSFexxx
> > 00001001 INTL 20050624)
> > [    0.000000] ACPI: FACS 00000000bf67e000 00040
> > [    0.000000] ACPI: HPET 00000000bf66f300 00038 (v01 DELL    M08
> > 00000001 ASL  00000061)
> > [    0.000000] ACPI: APIC 00000000bf66f400 00068 (v01 DELL    M08
> > 27D80A10 ASL  00000047)
> > [    0.000000] ACPI: MCFG 00000000bf66f3c0 0003E (v16 DELL    M08
> > 27D80A10 ASL  00000061)
> > [    0.000000] ACPI: SLIC 00000000bf66f49c 00176 (v01 DELL    M08
> > 27D80A10 ASL  00000061)
> > [    0.000000] ACPI: OSFR 00000000bf66ea00 0002C (v01 DELL    M08
> > 27D80A10 ASL  00000061)
> > [    0.000000] ACPI: BOOT 00000000bf66efc0 00028 (v01 DELL    M08
> > 27D80A10 ASL  00000061)
> > [    0.000000] ACPI: SSDT 00000000bf66da44 004CC (v01  PmRef    CpuPm
> > 00003000 INTL 20050624)
> > [    0.000000] ACPI: Local APIC address 0xfee00000
> > [    0.000000] ACPI: PM-Timer IO Port: 0x1008
> > [    0.000000] ACPI: Local APIC address 0xfee00000
> > [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> > [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> > [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> > [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> > [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> > [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> > [    0.000000] ACPI: IRQ0 used by override.
> > [    0.000000] ACPI: IRQ2 used by override.
> > [    0.000000] ACPI: IRQ9 used by override.
> > [    0.000000] Using ACPI (MADT) for SMP configuration information
> > [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> > [    0.008585] ACPI: Core revision 20101013
> > [    0.148662] ACPI: bus type pci registered
> > [    0.153294] ACPI: EC: Look up EC in DSDT
> > [    0.166448] ACPI: SSDT 00000000bf66e57a 00202 (v01  PmRef  Cpu0Ist
> > 00003000 INTL 20050624)
> > [    0.166832] ACPI: Dynamic OEM Table Load:
> > [    0.166974] ACPI: SSDT           (null) 00202 (v01  PmRef  Cpu0Ist
> > 00003000 INTL 20050624)
> > [    0.167407] ACPI: SSDT 00000000bf66df10 005E5 (v01  PmRef  Cpu0Cst
> > 00003001 INTL 20050624)
> > [    0.167778] ACPI: Dynamic OEM Table Load:
> > [    0.167920] ACPI: SSDT           (null) 005E5 (v01  PmRef  Cpu0Cst
> > 00003001 INTL 20050624)
> > [    0.168374] ACPI: SSDT 00000000bf66e77c 000C4 (v01  PmRef  Cpu1Ist
> > 00003000 INTL 20050624)
> > [    0.168748] ACPI: Dynamic OEM Table Load:
> > [    0.168890] ACPI: SSDT           (null) 000C4 (v01  PmRef  Cpu1Ist
> > 00003000 INTL 20050624)
> > [    0.169170] ACPI: SSDT 00000000bf66e4f5 00085 (v01  PmRef  Cpu1Cst
> > 00003000 INTL 20050624)
> > [    0.169535] ACPI: Dynamic OEM Table Load:
> > [    0.169677] ACPI: SSDT           (null) 00085 (v01  PmRef  Cpu1Cst
> > 00003000 INTL 20050624)
> > [    0.170011] ACPI: Interpreter enabled
> > [    0.170069] ACPI: (supports S0 S3 S4 S5)
> > [    0.170309] ACPI: Using IOAPIC for interrupt routing
> > [    0.205488] PCI: Using host bridge windows from ACPI; if necessary, use
> > "pci=nocrs" and report a bug
> > [    0.218138] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> > [    0.245781] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6
> > ACPI/GPIO/TCO
> > [    0.255791] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> > [    0.256056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
> > [    0.256161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> > [    0.256215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
> > [    0.256272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
> > [    0.266097] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
> > [    0.266450] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
> > [    0.266800] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
> > [    0.267182] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0,
> > disabled.
> > [    0.267702] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12
> > 14 15)
> > [    0.268398] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12
> > 14 15)
> > [    0.269097] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12
> > 14 15)
> > [    0.269782] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12
> > 14 15) *0, disabled.
> > [    0.270948] PCI: Using ACPI for IRQ routing
> > [    0.277738] pnp: PnP ACPI init
> > [    0.277812] ACPI: bus type pnp registered
> > [    0.290206] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
> > [    0.290275] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [    0.290329] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
> > [    0.290384] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
> > [    0.290435] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
> > [    0.290485] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
> > [    0.290547] pnp 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
> > [    0.290608] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active)
> > [    0.290659] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
> > [    0.290748] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 PNP0c01
> > (active)
> > [    0.291108] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
> > [    0.291510] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
> > [    0.305393] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
> > [    0.305457] pnp: PnP ACPI: found 13 devices
> > [    0.305515] ACPI: ACPI bus type pnp unregistered
> > [    0.556731] ACPI: Thermal Zone [THM] (39 C)
> > [    2.906534] ACPI: Lid Switch [LID]
> > [    2.906802] ACPI: Power Button [PBTN]
> > [    2.907060] ACPI: Sleep Button [SBTN]
> > [    2.950953] ACPI: acpi_idle registered with cpuidle
> > [    2.971400] ACPI: AC Adapter [AC] (on-line)
> > [    3.037921] ACPI: Battery Slot [BAT0] (battery present)
> > [   26.675955] acpi device:30: registered as cooling_device2
> > [   26.676541] ACPI: Video Device [VID] (multi-head: yes  rom: no  post:
> > no)
> > [   26.676572] [Firmware Bug]: Duplicate ACPI video bus devices for the
> > same VGA controller, please try module parameter
> > "video.allow_duplicates=1"if the current driver doesn't work.
> >
> > On Thu, 17 Feb 2011 18:07:15 -0400
> > Rodolfo <rof20004@gmail.com> wrote:
> >
> > > digita dmesg | grep acpi e informe-nos a saida desse comando..
> > Ah...digite
> > > como root
> > >
> > >
> > >
> > > Em 16 de fevereiro de 2011 22:35, André Luiz Fraga Moreira <
> > > andre4debian@gmail.com> escreveu:
> > >
> > > > Boa noite, amigos da lista
> > > >
> > > > Estou com o seguinte problema:
> > > >
> > > > Depois que compilei e instalei o kernel 2.6.37 no meu Debian, às vezes
> > meu
> > > > notebook trava durante o desligamento. O reboot é sempre normal, mas o
> > > > desligamento de vez em quando agarra, ficando parado em uma mensagem
> > > > "Disabling non-boot CPUs".
> > > >
> > > > Cheguei a suspeitar que era o BLK (Big Kernel Lock) que estava causando
> > o
> > > > problema, mas mesmo após desabilitá-lo, o erro ocorria.
> > > >
> > > > Pesquisando na Internet, vi que poderia ser problema na BIOS da
> > máquina,
> > > > mas fiz testes usando o kernel anterior (2.6.36.2) e não ocorreram
> > problemas
> > > > durante o desligamento, o que me fez suspeitar do kernel 2.6.37.
> > > >
> > > > Alguém sabe se é algum bug no kernel 2.6.37 ou algo do tipo que esteja
> > > > causando isso? O estranho é que o problema não ocorre toda vez que eu
> > > > desligo a máquina, só de vez em quando. Meu notebook é um Dell Inspiron
> > > > 1525.
> > > >
> > > > Agradeço qualquer ajuda, valeu!
> > > >
> > > > --
> > > > André Luiz Fraga Moreira <andre4debian@gmail.com>
> > > > Matriculado no curso de Tecnologia em Redes de Computadores
> > > > Linux Professional Institute Certified - LPIC 1
> > > > Debian user - www.debian.org
> > > > twitter e identi.ca: @andreluizfm
> > > >
> >
> >
> > --
> >  André Luiz Fraga Moreira <andre4debian@gmail.com>
> > Matriculado no curso de Tecnologia em Redes de Computadores
> > Linux Professional Institute Certified - LPIC 1
> > Debian user - www.debian.org
> > twitter e identi.ca: @andreluizfm
> >


-- 
André Luiz Fraga Moreira <andre4debian@gmail.com>
Matriculado no curso de Tecnologia em Redes de Computadores
Linux Professional Institute Certified - LPIC 1
Debian user - www.debian.org
twitter e identi.ca: @andreluizfm

Attachment: pgpMDPj3xrono.pgp
Description: PGP signature


Reply to: