Tenta colocar o drive radeon genérico na blacklist, isso faz com que
ele não seja carregado no boot.
Agora não lembro qual arquivo que faz isso, eu tinha essa placa de
vídeo, mas nunca consegui instalar ela.
2010/8/23 Ronaldo Reis Junior <chrysopa@gmail.com
<mailto:chrysopa@gmail.com>>
Pessoal,
estou com um Compaq Presario V2000, minha placa de vídeo é:
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon
XPRESS 200M 5955 (PCIE) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 3091
Flags: bus master, 66MHz, medium devsel, latency 66, IRQ 17
Memory at c8000000 (32-bit, prefetchable) [size=128M]
I/O ports at 9000 [size=256]
Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Kernel driver in use: radeon
Não consigo ativar o 3D dela, tentei inclusive instalar os drives
proprietários:
root@mobilix:/home/ronaldo# dpkg -l | grep fglrx
ii fglrx-atieventsd 1:10-7-1
ii fglrx-control 1:10-7-1
ii fglrx-driver 1:10-7-1
ii fglrx-glx 1:10-7-1
ii fglrx-kernel-2.6.32-5-686 1:10-7-1
ii fglrx-source 1:10-7-1
Mas ele continua usando o drive radeon e mesmo colocando um
xorg.conf ele não consegue usar o drive fglrx, diz que não tem
nenhum dispositivo.
Alguem tem alguma dica de como melhorar o suporte a esta placa?
Valeu
Segue o meu lsmod e meu xorg.conf que nao funcionou.
Valeu
Inte
root@mobilix:/home/ronaldo# lsmod
Module Size Used by
vboxnetadp 5118 0
vboxnetflt 12633 0
vboxdrv 126494 2 vboxnetadp,vboxnetflt
powernow_k8 9832 0
cpufreq_conservative 4018 0
cpufreq_userspace 1480 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
parport_pc 15799 0
ppdev 4058 0
lp 5570 0
parport 22554 3 parport_pc,ppdev,lp
radeon 509635 1
ttm 33378 1 radeon
drm_kms_helper 18305 1 radeon
drm 112020 3 radeon,ttm,drm_kms_helper
i2c_algo_bit 3497 1 radeon
sco 5857 2
bnep 7444 2
rfcomm 25167 0
l2cap 21705 6 bnep,rfcomm
crc16 1027 1 l2cap
bluetooth 36327 6 sco,bnep,rfcomm,l2cap
uinput 4796 1
fuse 43758 1
loop 9757 0
firewire_sbp2 9647 0
snd_atiixp_modem 6691 0
snd_atiixp 9093 1
snd_ac97_codec 79148 2 snd_atiixp_modem,snd_atiixp
ac97_bus 710 1 snd_ac97_codec
snd_pcm 47214 3
snd_atiixp_modem,snd_atiixp,snd_ac97_codec
snd_seq 35463 0
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 1 snd_seq
arc4 974 2
ecb 1405 2
snd 34363 9
snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
joydev 6771 0
b43 132595 0
rng_core 2178 1 b43
mac80211 123266 1 b43
cfg80211 87625 2 b43,mac80211
ac 1640 0
yenta_socket 16403 1
i2c_piix4 7076 0
i2c_core 12696 5
radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4
rsrc_nonstatic 7057 1 yenta_socket
k8temp 2415 0
battery 3782 0
video 14605 0
button 3598 0
processor 26615 2 powernow_k8
soundcore 3450 1 snd
shpchp 21220 0
tifm_7xx1 3014 0
rfkill 10264 3 bluetooth,cfg80211
pci_hotplug 18065 1 shpchp
snd_page_alloc 5045 3 snd_atiixp_modem,snd_atiixp,snd_pcm
tifm_core 3260 1 tifm_7xx1
wmi 3575 0
pcspkr 1207 0
psmouse 44657 0
evdev 5609 22
output 1204 1 video
serio_raw 2916 0
ext3 94204 2
jbd 32169 1 ext3
mbcache 3762 1 ext3
usbhid 27980 0
hid 50645 1 usbhid
sg 15968 0
sr_mod 10770 0
cdrom 26487 1 sr_mod
sd_mod 25869 4
crc_t10dif 1012 1 sd_mod
ata_generic 2019 0
8139cp 13421 0
ssb 33686 1 b43
sdhci_pci 4525 0
pata_atiixp 2541 3
sdhci 12147 1 sdhci_pci
pcmcia 17442 2 b43,ssb
libata 115721 2 ata_generic,pata_atiixp
thermal 9206 0
mmc_core 38503 3 b43,ssb,sdhci
ohci_hcd 16880 0
firewire_ohci 16509 0
8139too 14949 0
pcmcia_core 20450 5
b43,yenta_socket,rsrc_nonstatic,ssb,pcmcia
led_class 1757 2 b43,sdhci
thermal_sys 9378 3 video,processor,thermal
scsi_mod 101401 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
ehci_hcd 27851 0
mii 2714 2 8139cp,8139too
firewire_core 31187 2 firewire_sbp2,firewire_ohci
crc_itu_t 1035 1 firewire_core
usbcore 98386 4 usbhid,ohci_hcd,ehci_hcd
nls_base 4541 1 usbcore
xorg.conf
root@mobilix:/home/ronaldo# cat /etc/X11/xorg.conf.bak
# Xorg configuration created by
# system-config-display, aticonfig,
# and a bit of trial and error.
#
# This xorg.conf works with my laptop,
# which is a hp model dv8301nr featuring
# ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)
#
# This xorg.conf works with ATI's proprietary
# drivers, version 8.32.5.
#
# I have kept this as simple as possible.
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Synaptics" "CorePointer"
InputDevice "Mouse0" "AlwaysCore"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules/drivers"
ModulePath "/usr/lib/xorg/modules"
ModulePath "/lib/modules/fglrx"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "dri"
Load "glx"
Load "fbdevhw"
Load "v4l"
Load "record"
Load "freetype"
Load "type1"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "InputDevice"
Identifier "Synaptics"
Driver "synaptics"
Option "Device" "/dev/input/mice"
Option "Protocol" "auto-dev"
Option "Emulate3Buttons" "yes"
Option "SHMConfig" "on"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
BoardName "ATI Technologies Inc ATI Radeon XPRESS 200M
5955 (PCIE)"
Option "DesktopSetup" "clone"
Option "MaxGARTSize" "128"
Option "ForceMonitors" "notv"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x768" "1024x768"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
--
3ª lei - Na investigação e outros assuntos, o seu orientador está
sempre
certo, na maior parte do tempo.
--Herman, I. P. 2007. Following the law. NATURE, Vol 445, p. 228.
Prof. Ronaldo Reis Júnior
| .''`. UNIMONTES/DBG/Lab. Ecologia Comportamental e Computacional
| : :' : Campus Universitário Prof. Darcy Ribeiro, Vila Mauricéia
| `. `'` CP: 126, CEP: 39401-089, Montes Claros - MG - Brasil
| `- Fone: (38) 3229-8192 | ronaldo.reis@unimontes.br
<mailto:ronaldo.reis@unimontes.br>
| http://www.ppgcb.unimontes.br/lecc | LinuxUser#: 205366
--
To UNSUBSCRIBE, email to
debian-user-portuguese-REQUEST@lists.debian.org
<mailto:debian-user-portuguese-REQUEST@lists.debian.org>
with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org <mailto:listmaster@lists.debian.org>
Archive: [🔎] 4C7249AF.8040200@gmail.com">http://lists.debian.org/[🔎] 4C7249AF.8040200@gmail.com