[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: webcan

ainda estou tentando sem sucesso...

como é que eu faço para descobrir o driver adequado a essa câmera?

Dei o comando Dmesg e obtive o seguinte retorno:


[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Mar 13 18:08:45 UTC 2009
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ddb0000 (usable)
[    0.000000]  BIOS-e820: 000000003ddb0000 - 000000003ddbe400 (ACPI data)
[    0.000000]  BIOS-e820: 000000003ddbe400 - 000000003ddf0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003ddf0000 - 000000003de00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000] 93MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at [c00ff780] 000ff780
[    0.000000] Entering add_active_range(0, 0, 253360) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   253360
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   253360
[    0.000000] On node 0 totalpages: 253360
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 188 pages used for memmap
[    0.000000]   HighMem zone: 23796 pages, LIFO batch:3
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.5 present.
[    0.000000] ACPI: RSDP 000F92B0, 0024 (r2 ACPIAM)
[    0.000000] ACPI: XSDT 3DDB0100, 0084 (r1 LENOVO TP-6A         530 MSFT       97)
[    0.000000] ACPI: FACP 3DDB0290, 00F4 (r3 LENOVO TP-6A         530 MSFT       97)
[    0.000000] ACPI: DSDT 3DDB0680, BD71 (r1  LENOV TP-6A         180 INTL 20051117)
[    0.000000] ACPI: FACS 3DDBE400, 0040
[    0.000000] ACPI: APIC 3DDB0390, 005C (r1 LENOVO TP-6A         530 MSFT       97)
[    0.000000] ACPI: MCFG 3DDB0430, 003C (r1 LENOVO TP-6A         530 MSFT       97)
[    0.000000] ACPI: SLIC 3DDB0470, 0176 (r1 LENOVO TP-6A         530 MSFT       97)
[    0.000000] ACPI: ECDT 3DDB0620, 0054 (r1 LENOVO TP-6A         530 MSFT       97)
[    0.000000] ACPI: DBGP 3DDB03F0, 0034 (r1 LENOVO TP-6A         530 MSFT       97)
[    0.000000] ACPI: BOOT 3DDB05F0, 0028 (r1 LENOVO TP-6A         530 MSFT       97)
[    0.000000] ACPI: OEMB 3DDBE440, 0071 (r1 LENOVO TP-6A         530 MSFT       97)
[    0.000000] ACPI: HPET 3DDBC400, 0038 (r1 LENOVO TP-6A         530 MSFT       97)
[    0.000000] ACPI: GSCI 3DDBE4C0, 2024 (r1 LENOVO TP-6A         530 MSFT       97)
[    0.000000] ACPI: ATKG 3DDC06F0, 8024 (r1 LENOVO TP-6A         530 MSFT       97)
[    0.000000] ACPI: SSDT 3DDC9280, 04E6 (r1  PmRef TP-6A         180 INTL 20051117)
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3de00000:c1000000)
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
[    0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[    0.000000] NR_CPUS: 8, nr_cpu_ids: 2
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 251380
[    0.000000] Kernel command line: root=/dev/sda3 ro quiet
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Extended CMOS year: 2000
[    0.000000] Detected 1995.047 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Memory: 994748k/1013440k available (1769k kernel code, 18132k reserved, 752k data, 244k init, 95936k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB)
[    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.004000]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.004000]       .init : 0xc037f000 - 0xc03bc000   ( 244 kB)
[    0.004000]       .data : 0xc02ba4d3 - 0xc0376620   ( 752 kB)
[    0.004000]       .text : 0xc0100000 - 0xc02ba4d3   (1769 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.004000] hpet clockevent registered
[    0.083950] Calibrating delay using timer specific routine.. 3994.11 BogoMIPS (lpj=7988225)
[    0.083979] Security Framework initialized
[    0.083983] SELinux:  Disabled at boot.
[    0.083986] Capability LSM initialized
[    0.083998] Mount-cache hash table entries: 512
[    0.084005] Initializing cgroup subsys ns
[    0.084005] Initializing cgroup subsys cpuacct
[    0.084005] Initializing cgroup subsys devices
[    0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.084005] CPU: L2 cache: 2048K
[    0.084005] CPU: Physical Processor ID: 0
[    0.084005] CPU: Processor Core ID: 0
[    0.084005] Intel machine check architecture supported.
[    0.084005] Intel machine check reporting enabled on CPU#0.
[    0.084005] using mwait in idle threads.
[    0.084005] Checking 'hlt' instruction... OK.
[    0.100006] ACPI: Core revision 20080321
[    0.120007] ENABLING IO-APIC IRQs
[    0.120007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.159711] CPU0: Intel(R) Core(TM)2 Duo CPU     T5870  @ 2.00GHz stepping 0d
[    0.160010] Booting processor 1/1 ip 6000
[    0.168010] Initializing CPU#1
[    0.168010] Calibrating delay using timer specific routine.. 3989.97 BogoMIPS (lpj=7979943)
[    0.168010] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.168010] CPU: L2 cache: 2048K
[    0.168010] CPU: Physical Processor ID: 0
[    0.168010] CPU: Processor Core ID: 1
[    0.168010] Intel machine check architecture supported.
[    0.168010] Intel machine check reporting enabled on CPU#1.
[    0.248015] CPU1: Intel(R) Core(TM)2 Duo CPU     T5870  @ 2.00GHz stepping 0d
[    0.248015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.252015] Brought up 2 CPUs
[    0.252015] Total of 2 processors activated (7984.08 BogoMIPS).
[    0.252015] CPU0 attaching sched-domain:
[    0.252015]  domain 0: span 0-1
[    0.252015]   groups: 0 1
[    0.252015] CPU1 attaching sched-domain:
[    0.252015]  domain 0: span 0-1
[    0.252015]   groups: 1 0
[    0.252015] net_namespace: 660 bytes
[    0.252015] Booting paravirtualized kernel on bare hardware
[    0.252015] NET: Registered protocol family 16
[    0.252015] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.252015] ACPI: bus type pci registered
[    0.252015] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.252015] PCI: Not using MMCONFIG.
[    0.252015] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=13
[    0.252015] PCI: Using configuration type 1 for base access
[    0.252015] Setting up standard PCI resources
[    0.252016] ACPI: EC: EC description table is found, configuring boot EC
[    0.168011] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.286037] ACPI: Interpreter enabled
[    0.286040] ACPI: (supports S0 S1 S3 S4 S5)
[    0.286059] ACPI: Using IOAPIC for interrupt routing
[    0.286179] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.289848] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.289851] PCI: Using MMCONFIG for extended config space
[    0.307712] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = ""> [    0.307712] ACPI: EC: driver started in interrupt mode
[    0.307712] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.309935] PCI: Transparent bridge - 0000:00:1e.0
[    0.309935] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.309935] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[    0.310052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.310192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.310317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.335746] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[    0.335746] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
[    0.335921] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[    0.336093] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
[    0.336267] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
[    0.336440] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
[    0.336616] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[    0.336790] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[    0.341586] ACPI Warning (tbutils-0217): Incorrect checksum in table [ATKG] - F3, should be B3 [20080321]
[    0.341599] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.342112] pnp: PnP ACPI init
[    0.342119] ACPI: bus type pnp registered
[    0.343714] pnp 00:0c: mem resource (0xfdefac00-0xfdf3abff) overlaps 0000:00:02.0 BAR 0 (0xfdc00000-0xfdffffff), disabling
[    0.343714] pnp 00:0c: mem resource (0xfdbfac00-0xfdc3abff) overlaps 0000:00:02.0 BAR 0 (0xfdc00000-0xfdffffff), disabling
[    0.343714] pnp 00:0c: mem resource (0xfdbfac00-0xfdc3abff) overlaps 0000:00:02.1 BAR 0 (0xfdb00000-0xfdbfffff), disabling
[    0.343714] pnp 00:0c: mem resource (0xfe0fac00-0xfe13abff) overlaps 0000:00:1c.1 BAR 8 (0xfe100000-0xfe1fffff), disabling
[    0.343714] pnp 00:0c: mem resource (0xfe1fac00-0xfe23abff) overlaps 0000:00:1c.1 BAR 8 (0xfe100000-0xfe1fffff), disabling
[    0.343714] pnp 00:0c: mem resource (0xfe1fac00-0xfe23abff) overlaps 0000:00:1c.2 BAR 8 (0xfe200000-0xfe9fffff), disabling
[    0.343714] pnp 00:0c: mem resource (0xfe1fac00-0xfe23abff) overlaps 0000:02:00.0 BAR 0 (0xfe1f0000-0xfe1fffff), disabling
[    0.344481] pnp: PnP ACPI: found 15 devices
[    0.344483] ACPI: ACPI bus type pnp unregistered
[    0.344487] PnPBIOS: Disabled by ACPI PNP
[    0.347714] PCI: Using ACPI for IRQ routing
[    0.351215] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.351220] hpet0: 4 64-bit timers, 14318180 Hz
[    0.351714] ACPI: RTC can wake from S4
[    0.354655] system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved
[    0.354666] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.354668] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.354671] system 00:08: ioport range 0x400-0x41f has been reserved
[    0.354673] system 00:08: ioport range 0x480-0x4bf has been reserved
[    0.354676] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.354679] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.354682] system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
[    0.354685] system 00:08: iomem range 0xfed90000-0xfed90fff has been reserved
[    0.354687] system 00:08: iomem range 0xfed91000-0xfed91fff has been reserved
[    0.354690] system 00:08: iomem range 0xfed92000-0xfed92fff has been reserved
[    0.354693] system 00:08: iomem range 0xfed93000-0xfed93fff has been reserved
[    0.354695] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[    0.354698] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[    0.354705] system 00:0a: iomem range 0xffa00000-0xffbfffff could not be reserved
[    0.354707] system 00:0a: iomem range 0xffe00000-0xffffffff could not be reserved
[    0.354713] system 00:0b: iomem range 0xffc00000-0xffdfffff could not be reserved
[    0.354718] system 00:0c: ioport range 0x250-0x253 has been reserved
[    0.354721] system 00:0c: ioport range 0x256-0x25f has been reserved
[    0.354723] system 00:0c: ioport range 0x702-0x703 has been reserved
[    0.354726] system 00:0c: ioport range 0x4c0-0x4cf has been reserved
[    0.354728] system 00:0c: ioport range 0x4d2-0x4df has been reserved
[    0.354731] system 00:0c: ioport range 0x4e0-0x4ef has been reserved
[    0.354733] system 00:0c: ioport range 0x4f0-0x4ff has been reserved
[    0.354736] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.354739] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.354742] system 00:0c: iomem range 0xf9efc000-0xf9efefff has been reserved
[    0.354745] system 00:0c: iomem range 0xf7ffec00-0xf7ffec03 has been reserved
[    0.354750] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[    0.354756] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[    0.354759] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[    0.354762] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[    0.354764] system 00:0e: iomem range 0x100000-0x3ddfffff could not be reserved
[    0.384200] PCI: Bridge: 0000:00:1c.0
[    0.384200]   IO window: disabled.
[    0.384200]   MEM window: disabled.
[    0.384200]   PREFETCH window: disabled.
[    0.384200] PCI: Bridge: 0000:00:1c.1
[    0.384200]   IO window: disabled.
[    0.384200]   MEM window: 0xfe100000-0xfe1fffff
[    0.384200]   PREFETCH window: disabled.
[    0.384200] PCI: Bridge: 0000:00:1c.2
[    0.384200]   IO window: 6000-dfff
[    0.384200]   MEM window: 0xfe200000-0xfe9fffff
[    0.384200]   PREFETCH window: 0x00000000fc700000-0x00000000fcefffff
[    0.384200] PCI: Bridge: 0000:00:1c.3
[    0.384200]   IO window: e000-efff
[    0.384200]   MEM window: 0xfea00000-0xfeafffff
[    0.384200]   PREFETCH window: 0x00000000fcf00000-0x00000000fcffffff
[    0.384200] PCI: Bridge: 0000:00:1e.0
[    0.384200]   IO window: disabled.
[    0.384200]   MEM window: 0xfeb00000-0xfebfffff
[    0.384200]   PREFETCH window: disabled.
[    0.384200] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.384200] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.384200] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[    0.384200] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.384200] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[    0.384200] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.384200] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[    0.384200] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    0.384200] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.384200] NET: Registered protocol family 2
[    0.394283] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.394500] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.394888] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.395113] TCP: Hash tables configured (established 131072 bind 65536)
[    0.395116] TCP reno registered
[    0.398291] NET: Registered protocol family 1
[    0.398386] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[    0.510167] Switched to high resolution mode on CPU 0
[    0.625496]  it is
[    0.871153] Freeing initrd memory: 6054k freed
[    0.871153] Simple Boot Flag at 0x51 set to 0x1
[    0.873186] audit: initializing netlink socket (disabled)
[    0.873202] type=2000 audit(1244407461.864:1): initialized
[    0.873497] highmem bounce pool size: 64 pages
[    0.873497] Total HugeTLB memory allocated, 0
[    0.873497] VFS: Disk quotas dquot_6.5.1
[    0.873497] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.873497] msgmni has been set to 1767
[    0.873497] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.873497] io scheduler noop registered
[    0.873497] io scheduler anticipatory registered
[    0.873497] io scheduler deadline registered
[    0.873497] io scheduler cfq registered (default)
[    0.873497] pci 0000:00:02.0: Boot video device
[    0.873497] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.873497] assign_interrupt_mode Found MSI capability
[    0.873497] Allocate Port Service[0000:00:1c.0:pcie00]
[    0.873497] Allocate Port Service[0000:00:1c.0:pcie03]
[    0.873497] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.873497] assign_interrupt_mode Found MSI capability
[    0.873497] Allocate Port Service[0000:00:1c.1:pcie00]
[    0.873497] Allocate Port Service[0000:00:1c.1:pcie03]
[    0.873497] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.873497] assign_interrupt_mode Found MSI capability
[    0.873497] Allocate Port Service[0000:00:1c.2:pcie00]
[    0.873497] Allocate Port Service[0000:00:1c.2:pcie02]
[    0.873497] Allocate Port Service[0000:00:1c.2:pcie03]
[    0.873497] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    0.873497] assign_interrupt_mode Found MSI capability
[    0.873497] Allocate Port Service[0000:00:1c.3:pcie00]
[    0.873497] Allocate Port Service[0000:00:1c.3:pcie03]
[    0.873498] isapnp: Scanning for PnP cards...
[    1.226881] isapnp: No Plug & Play device found
[    1.229498] hpet_resources: 0xfed00000 is busy
[    1.229498] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.229509] brd: module loaded
[    1.229509] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.233650] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.236170] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.236175] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.236178] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.236180] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.236182] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.238473] mice: PS/2 mouse device common for all mice
[    1.238474] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.238474] rtc0: alarms up to one month, y3k
[    1.238474] cpuidle: using governor ladder
[    1.238474] cpuidle: using governor menu
[    1.238474] No iBFT detected.
[    1.238474] TCP cubic registered
[    1.238474] NET: Registered protocol family 17
[    1.238474] Using IPI No-Shortcut mode
[    1.238474] registered taskstats version 1
[    1.238474] rtc_cmos 00:03: setting system clock to 2009-06-07 20:44:23 UTC (1244407463)
[    1.238474] Freeing unused kernel memory: 244k freed
[    1.315582] ACPI Warning (tbutils-0217): Incorrect checksum in table [SSDT] - E4, should be 73 [20080321]
[    1.315582] ACPI: SSDT 3DDC87F0, 0286 (r1  PmRef TP-6A         180 INTL 20051117)
[    1.315582] ACPI: SSDT 3DDC8B10, 0765 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
[    1.318445] Monitor-Mwait will be used to enter C-1 state
[    1.318445] Monitor-Mwait will be used to enter C-3 state
[    1.318445] ACPI: CPU0 (power states: C1[C1] C2[C3])
[    1.318445] ACPI: ACPI0007:00 is registered as cooling_device0
[    1.318445] ACPI: Processor [P001] (supports 8 throttling states)
[    1.318445] ACPI Warning (tbutils-0217): Incorrect checksum in table [SSDT] - 37, should be C7 [20080321]
[    1.318445] ACPI: SSDT 3DDC8720, 00C8 (r1  PmRef TP-6A         180 INTL 20051117)
[    1.318445] ACPI: SSDT 3DDC8A80, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)
[    1.318445] Marking TSC unstable due to: TSC halts in idle.
[    1.322047] ACPI: CPU1 (power states: C1[C1] C2[C3])
[    1.322047] ACPI: ACPI0007:01 is registered as cooling_device1
[    1.322047] ACPI: Processor [P002] (supports 8 throttling states)
[    1.340950] ACPI: Expecting a [Reference] package element, found type C
[    1.340978] ACPI: LNXTHERM:01 is registered as thermal_zone0
[    1.343028] input: AT Translated Set 2 keyboard as /class/input/input0
[    1.377641] ACPI: Thermal Zone [THRM] (44 C)
[    1.513402] usbcore: registered new interface driver usbfs
[    1.513402] usbcore: registered new interface driver hub
[    1.513402] usbcore: registered new device driver usb
[    1.513402] USB Universal Host Controller Interface driver v3.0
[    1.513402] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[    1.513402] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[    1.513402] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.513402] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.513402] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00005880
[    1.513402] usb usb1: configuration #1 chosen from 1 choice
[    1.513402] hub 1-0:1.0: USB hub found
[    1.513402] hub 1-0:1.0: 2 ports detected
[    1.620522] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.620526] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.620528] usb usb1: Product: UHCI Host Controller
[    1.620530] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[    1.620532] usb usb1: SerialNumber: 0000:00:1a.0
[    1.622358] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[    1.622358] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[    1.622358] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.622358] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    1.622358] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00005800
[    1.622358] usb usb2: configuration #1 chosen from 1 choice
[    1.622358] hub 2-0:1.0: USB hub found
[    1.622358] hub 2-0:1.0: 2 ports detected
[    1.726003] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.726006] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.726009] usb usb2: Product: UHCI Host Controller
[    1.726011] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[    1.726013] usb usb2: SerialNumber: 0000:00:1a.1
[    1.727589] ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 19
[    1.727589] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[    1.727589] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.727589] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[    1.727589] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00005480
[    1.727589] usb usb3: configuration #1 chosen from 1 choice
[    1.727589] hub 3-0:1.0: USB hub found
[    1.727589] hub 3-0:1.0: 2 ports detected
[    1.738189] No dock devices found.
[    1.744366] SCSI subsystem initialized
[    1.784174] libata version 3.00 loaded.
[    1.784174] sdhci: Secure Digital Host Controller Interface driver
[    1.784174] sdhci: Copyright(c) Pierre Ossman
[    1.786118] ricoh-mmc: Ricoh MMC Controller disabling driver
[    1.786120] ricoh-mmc: Copyright(c) Philip Langdale
[    1.830368] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.830371] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.830374] usb usb3: Product: UHCI Host Controller
[    1.830375] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[    1.830377] usb usb3: SerialNumber: 0000:00:1a.2
[    1.832300] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[    1.832300] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[    1.832300] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.832300] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
[    1.836172] ehci_hcd 0000:00:1a.7: debug port 1
[    1.836172] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[    1.836172] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe0fbc00
[    1.851728] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    1.851811] usb usb4: configuration #1 chosen from 1 choice
[    1.851853] hub 4-0:1.0: USB hub found
[    1.851866] hub 4-0:1.0: 6 ports detected
[    1.955528] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.955533] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.955542] usb usb4: Product: EHCI Host Controller
[    1.955544] usb usb4: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[    1.955545] usb usb4: SerialNumber: 0000:00:1a.7
[    1.956274] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[    1.956274] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    1.956274] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.956274] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.956274] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005400
[    1.956274] usb usb5: configuration #1 chosen from 1 choice
[    1.956274] hub 5-0:1.0: USB hub found
[    1.956274] hub 5-0:1.0: 2 ports detected
[    2.016095] Clocksource tsc unstable (delta = -189448159 ns)
[    2.059545] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.059550] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.059553] usb usb5: Product: UHCI Host Controller
[    2.059556] usb usb5: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[    2.059559] usb usb5: SerialNumber: 0000:00:1d.0
[    2.060271] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[    2.060271] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    2.060271] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.060271] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    2.060271] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
[    2.060271] usb usb6: configuration #1 chosen from 1 choice
[    2.060271] hub 6-0:1.0: USB hub found
[    2.060271] hub 6-0:1.0: 2 ports detected
[    2.163674] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.163678] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.163682] usb usb6: Product: UHCI Host Controller
[    2.163685] usb usb6: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[    2.163688] usb usb6: SerialNumber: 0000:00:1d.1
[    2.164271] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    2.164271] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    2.164271] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.164271] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    2.164271] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005000
[    2.164271] usb usb7: configuration #1 chosen from 1 choice
[    2.164271] hub 7-0:1.0: USB hub found
[    2.164271] hub 7-0:1.0: 2 ports detected
[    2.267730] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    2.267735] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.267739] usb usb7: Product: UHCI Host Controller
[    2.267742] usb usb7: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[    2.267750] usb usb7: SerialNumber: 0000:00:1d.2
[    2.268273] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[    2.268273] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    2.268273] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.268273] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[    2.272480] ehci_hcd 0000:00:1d.7: debug port 1
[    2.272480] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    2.272480] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe0fb800
[    2.286363] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    2.286440] usb usb8: configuration #1 chosen from 1 choice
[    2.286468] hub 8-0:1.0: USB hub found
[    2.286475] hub 8-0:1.0: 6 ports detected
[    2.391223] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    2.391227] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.391229] usb usb8: Product: EHCI Host Controller
[    2.391231] usb usb8: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[    2.391233] usb usb8: SerialNumber: 0000:00:1d.7
[    2.394333] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[    2.394333] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[    2.394333] PCI: Setting latency timer of device 0000:0c:00.0 to 64
[    2.394333] ahci 0000:00:1f.2: version 3.0
[    2.394333] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[    2.394443] eth0: RTL8168c/8111c at 0xf88e0000, 00:22:15:69:eb:43, XID 3c4000c0 IRQ 219
[    2.394333] ACPI: PCI Interrupt 0000:0d:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[    2.446246] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[febff800-febfffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    2.455105] sdhci: SDHCI controller found at 0000:0d:00.1 [1180:0822] (rev 22)
[    2.455105] ACPI: PCI Interrupt 0000:0d:00.1[B] -> GSI 17 (level, low) -> IRQ 17
[    2.456112] mmc0: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.456474] mmc0: SDHCI at 0xfebff400 irq 17 DMA
[    2.725032] usb 8-5: new high speed USB device using ehci_hcd and address 2
[    3.353367] usb 8-5: configuration #1 chosen from 1 choice
[    3.354717] usb 8-5: New USB device found, idVendor=17ef, idProduct=480b
[    3.354717] usb 8-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.354717] usb 8-5: Product: Integrated Camera
[    3.401351] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    3.401355] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
[    3.401360] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    3.403435] scsi0 : ahci
[    3.403435] scsi1 : ahci
[    3.403435] scsi2 : ahci
[    3.403435] scsi3 : ahci
[    3.403435] scsi4 : ahci
[    3.403435] scsi5 : ahci
[    3.403435] ata1: SATA max UDMA/133 abar m2048@0xfe0fb000 port 0xfe0fb100 irq 218
[    3.403435] ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 218
[    3.403435] ata3: DUMMY
[    3.403435] ata4: DUMMY
[    3.403435] ata5: SATA max UDMA/133 abar m2048@0xfe0fb000 port 0xfe0fb300 irq 218
[    3.403435] ata6: SATA max UDMA/133 abar m2048@0xfe0fb000 port 0xfe0fb380 irq 218
[    3.720986] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.723453] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[    3.723530] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[    3.723530] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[    3.724264] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00061b000080814c]
[    3.727733] ata1.00: ATA-8: SAMSUNG HM160HI, HH100-05, max UDMA/133
[    3.727733] ata1.00: 312581808 sectors, multi 0: LBA48
[    3.732382] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[    3.735361] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[    3.735361] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[    3.739527] ata1.00: configured for UDMA/133
[    4.477725] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.480477] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[    4.480480] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[    4.480708] ata2.00: ATAPI: MATSHITADVD-RAM UJ870A, SB23, max UDMA/33
[    4.485476] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[    4.485476] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[    4.485476] ata2.00: configured for UDMA/33
[    4.821748] ata5: SATA link down (SStatus 0 SControl 300)
[    5.158642] ata6: SATA link down (SStatus 0 SControl 300)
[    5.174533] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM160HI  HH10 PQ: 0 ANSI: 5
[    5.175937] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ870A   SB23 PQ: 0 ANSI: 5
[    5.175937] ricoh-mmc: Ricoh MMC controller found at 0000:0d:00.2 [1180:0843] (rev 12)
[    5.175937] ricoh-mmc: Controller is now disabled.
[    5.191491] Driver 'sd' needs updating - please use bus_type methods
[    5.191491] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    5.191491] sd 0:0:0:0: [sda] Write Protect is off
[    5.191491] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.191491] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.191491] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    5.191512] sd 0:0:0:0: [sda] Write Protect is off
[    5.191515] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.191546] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.191551]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[    5.223202]  sda1 sda2 sda3 sda4 < sda5 >
[    5.238064] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.239492] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.239492] Uniform CD-ROM driver Revision: 3.20
[    5.239492] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.249994] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.249994] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.479401] PM: Starting manual resume from disk
[    5.517395] kjournald starting.  Commit interval 5 seconds
[    5.517395] EXT3-fs: mounted filesystem with ordered data mode.
[    6.873462] udevd version 125 started
[    7.404638] Non-volatile memory driver v1.2
[    7.515252] Linux agpgart interface v0.103
[    7.540312] input: Power Button (FF) as /class/input/input1
[    7.601710] ACPI: Power Button (FF) [PWRF]
[    7.601820] input: Sleep Button (CM) as /class/input/input2
[    7.667066] ACPI: Sleep Button (CM) [SLPB]
[    7.667121] input: Lid Switch as /class/input/input3
[    7.699297] agpgart: Detected an Intel Mobile Intel? GM45 Express Chipset.
[    7.699297] agpgart: Detected 32764K stolen memory.
[    7.700130] ACPI: Lid Switch [LID]
[    7.711296] agpgart: AGP aperture is 256M @ 0xd0000000
[    7.727297] ACPI: AC Adapter [AC0] (on-line)
[    7.758587] thinkpad_acpi: Not yet supported ThinkPad detected!
[    7.865944] ACPI: Battery Slot [BAT0] (battery present)
[    8.172085] ACPI: device:1e is registered as cooling_device2
[    8.172085] input: Video Bus as /class/input/input4
[    8.226411] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    8.226432] proc_dir_entry 'VGA' already registered
[    8.226435] Pid: 1537, comm: modprobe Not tainted 2.6.26-1-686 #1
[    8.226444]  [<c01a440d>] proc_register+0xb4/0x11f
[    8.226451]  [<c01a45f0>] proc_mkdir_mode+0x2b/0x3d
[    8.226455]  [<f899dff4>] acpi_video_bus_add+0x177/0xae4 [video]
[    8.226462]  [<c01ad3d4>] sysfs_find_dirent+0x13/0x23
[    8.226467]  [<c01adf64>] sysfs_create_link+0x99/0xdd
[    8.226472]  [<c02166ee>] acpi_device_probe+0x33/0x7c
[    8.226477]  [<c023a981>] __driver_attach+0x0/0x55
[    8.226481]  [<c023a90a>] driver_probe_device+0xb5/0x12c
[    8.226485]  [<c023a9b8>] __driver_attach+0x37/0x55
[    8.226489]  [<c023a24b>] bus_for_each_dev+0x37/0x59
[    8.226493]  [<c023a7a5>] driver_attach+0x11/0x13
[    8.226497]  [<c023a981>] __driver_attach+0x0/0x55
[    8.226500]  [<c023a5a8>] bus_add_driver+0x8a/0x1a6
[    8.226503]  [<c01ddbdc>] kset_find_obj+0x20/0x4b
[    8.226508]  [<c023ab99>] driver_register+0x6d/0xc1
[    8.226512]  [<f896002f>] acpi_video_init+0x2f/0x4d [video]
[    8.226516]  [<c013f5cb>] sys_init_module+0x186c/0x19dc
[    8.226521]  [<c018a54d>] seq_open+0x4d/0x6a
[    8.226530]  [<f8995000>] cfg80211_exit+0x0/0x1e [cfg80211]
[    8.226535]  [<c0166365>] vma_link+0xa3/0xbd
[    8.226541]  [<c02169c8>] acpi_bus_register_driver+0x0/0x38
[    8.226551]  [<c0103853>] sysenter_past_esp+0x78/0xb1
[    8.226556]  [<c02b0000>] acpi_pci_root_add+0x101/0x296
[    8.226561]  =======================
[    8.231307] ACPI: device:23 is registered as cooling_device3
[    8.231307] input: Video Bus as /class/input/input5
[    8.285331] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    8.294993] Linux video capture interface: v2.00
[    8.347306] input: PC Speaker as /class/input/input6
[    8.478847] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480b)
[    8.513145] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[    8.513157] PCI: Setting latency timer of device 0000:02:00.0 to 64
[    8.513179] ath5k_pci 0000:02:00.0: registered as 'phy0'
[    8.517905] ath5k phy0: Support for RF2425 is under development.
[    8.534848] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[    8.554848] phy0: Selected rate control algorithm 'pid'
[    8.648105] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[    8.900376] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[    8.900376] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[    9.114769] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000
[    9.114769] serio: Synaptics pass-through port at isa0060/serio4/input0
[    9.157137] input: SynPS/2 Synaptics TouchPad as /class/input/input7
[    9.221847] usbcore: registered new interface driver uvcvideo
[    9.221850] USB Video Class driver (v0.1.0)
[   10.080012] Adding 979924k swap on /dev/sda1.  Priority:-1 extents:1 across:979924k
[   10.358420] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x014b2001
[   10.467086] EXT3 FS on sda3, internal journal
[   11.076829] loop: module loaded
[   12.189977] kjournald starting.  Commit interval 5 seconds
[   12.190174] EXT3 FS on sda5, internal journal
[   12.190174] EXT3-fs: mounted filesystem with ordered data mode.
[   14.130282] r8169: eth0: link up
[   14.130282] r8169: eth0: link up
[   14.929922] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   15.170801] input: TPPS/2 IBM TrackPoint as /class/input/input8
[   17.326879] NET: Registered protocol family 10
[   17.326879] lo: Disabled Privacy Extensions
[   18.604971] lp: driver loaded but no devices found
[   18.670814] ppdev: user-space parallel port driver
[   22.816456] Bluetooth: Core ver 2.11
[   22.816456] NET: Registered protocol family 31
[   22.816456] Bluetooth: HCI device and connection manager initialized
[   22.816456] Bluetooth: HCI socket layer initialized
[   22.901652] Bluetooth: L2CAP ver 2.9
[   22.901652] Bluetooth: L2CAP socket layer initialized
[   23.021613] Bluetooth: RFCOMM socket layer initialized
[   23.021613] Bluetooth: RFCOMM TTY layer initialized
[   23.021613] Bluetooth: RFCOMM ver 1.8
[   23.227575] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   25.692687] mtrr: no more MTRRs available
[   25.692790] mtrr: no more MTRRs available
[   25.692833] mtrr: no more MTRRs available
[   25.692874] mtrr: no more MTRRs available
[   40.692135] eth0: no IPv6 routers present
[   52.573499] CPU0 attaching NULL sched-domain.
[   52.573515] CPU1 attaching NULL sched-domain.
[   52.574399] CPU0 attaching sched-domain:
[   52.574409]  domain 0: span 0-1
[   52.574415]   groups: 0 1
[   52.574424] CPU1 attaching sched-domain:
[   52.574429]  domain 0: span 0-1
[   52.574434]   groups: 1 0
[  424.642961] UDF-fs: No VRS found
[  424.707725] ISO 9660 Extensions: Microsoft Joliet Level 3
[  424.930490] ISO 9660 Extensions: RRIP_1991A
[ 1854.695902] usb 6-2: new low speed USB device using uhci_hcd and address 2
[ 1854.863657] usb 6-2: configuration #1 chosen from 1 choice
[ 1854.866667] usb 6-2: New USB device found, idVendor=1bcf, idProduct=0007
[ 1854.866667] usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1854.866667] usb 6-2: Product: USB Optical Mouse
[ 1854.975465] usbcore: registered new interface driver hiddev
[ 1854.994125] input: USB Optical Mouse as /class/input/input9
[ 1854.997326] input,hiddev96,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2
[ 1854.997358] usbcore: registered new interface driver usbhid
[ 1854.997363] usbhid: v2.6:USB HID core driver

2009/6/5 Alexandre Pereira Bühler <buhler@infobrindes.com.br>
Vá no repositório e instale o módulo gspca correto para sua arquitetura e veja se a webcam funciona após reiniciar.

--
Alexandre Pereira Bühler
Linux User: 397.546

Simão & Bühler Ltda (Infobrindes)
Instalação, manutenção e venda de servidores GNU/Linux.
http://www.simaoebuhler.com.br
alexandre@simaoebuhler.com.br

Brindes e material promocional.
http://www.infobrindes.com.br
alexandre@infobrindes.com.br
Telefones: (41) 3538-5428 / (41) 3532-5428

Colunista: www.delphisophp.com
Owner: http://br.groups.yahoo.com/group/freepascal/
Liberdade é essencial. Use GNU/Linux.




--
To UNSUBSCRIBE, email to debian-user-portuguese-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org


Reply to: