Re: webcan
É que a camera do meu note HP é integrada e aparece com o lsusb
2009/6/7 Felipe Cabral <felipehistory@gmail.com>:
> mas é uma câmera integrada!! Não é USB! É câmera de Notebook. Já disse,
> tenho um Lenovo Thinkpad.
>
> Bus 008 Device 002: ID 17ef:480b Lenovo
> Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>
>
> 2009/6/7 Eduardo Rodrigues da Luz <eduardo.r.luz@gmail.com>
>>
>> Creio que com um
>> #lsusb
>> vc consegue sabe qual é o modelo.
>>
>> 2009/6/7 Felipe Cabral <felipehistory@gmail.com>:
>> > ainda estou tentando sem sucesso...
>> >
>> > como é que eu faço para descobrir o driver adequado a essa câmera?
>> >
>> > Dei o comando Dmesg e obtive o seguinte retorno:
>> >
>> >
>> > [ 0.000000] Initializing cgroup subsys cpuset
>> > [ 0.000000] Initializing cgroup subsys cpu
>> > [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13lenny2)
>> > (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian
>> > 4.1.2-25)) #1 SMP Fri Mar 13 18:08:45 UTC 2009
>> > [ 0.000000] BIOS-provided physical RAM map:
>> > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
>> > [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000
>> > (reserved)
>> > [ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000
>> > (reserved)
>> > [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ddb0000 (usable)
>> > [ 0.000000] BIOS-e820: 000000003ddb0000 - 000000003ddbe400 (ACPI
>> > data)
>> > [ 0.000000] BIOS-e820: 000000003ddbe400 - 000000003ddf0000 (ACPI
>> > NVS)
>> > [ 0.000000] BIOS-e820: 000000003ddf0000 - 000000003de00000
>> > (reserved)
>> > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000
>> > (reserved)
>> > [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000
>> > (reserved)
>> > [ 0.000000] 93MB HIGHMEM available.
>> > [ 0.000000] 896MB LOWMEM available.
>> > [ 0.000000] found SMP MP-table at [c00ff780] 000ff780
>> > [ 0.000000] Entering add_active_range(0, 0, 253360) 0 entries of 256
>> > used
>> > [ 0.000000] Zone PFN ranges:
>> > [ 0.000000] DMA 0 -> 4096
>> > [ 0.000000] Normal 4096 -> 229376
>> > [ 0.000000] HighMem 229376 -> 253360
>> > [ 0.000000] Movable zone start PFN for each node
>> > [ 0.000000] early_node_map[1] active PFN ranges
>> > [ 0.000000] 0: 0 -> 253360
>> > [ 0.000000] On node 0 totalpages: 253360
>> > [ 0.000000] DMA zone: 32 pages used for memmap
>> > [ 0.000000] DMA zone: 0 pages reserved
>> > [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
>> > [ 0.000000] Normal zone: 1760 pages used for memmap
>> > [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
>> > [ 0.000000] HighMem zone: 188 pages used for memmap
>> > [ 0.000000] HighMem zone: 23796 pages, LIFO batch:3
>> > [ 0.000000] Movable zone: 0 pages used for memmap
>> > [ 0.000000] DMI 2.5 present.
>> > [ 0.000000] ACPI: RSDP 000F92B0, 0024 (r2 ACPIAM)
>> > [ 0.000000] ACPI: XSDT 3DDB0100, 0084 (r1 LENOVO TP-6A 530
>> > MSFT 97)
>> > [ 0.000000] ACPI: FACP 3DDB0290, 00F4 (r3 LENOVO TP-6A 530
>> > MSFT 97)
>> > [ 0.000000] ACPI: DSDT 3DDB0680, BD71 (r1 LENOV TP-6A 180
>> > INTL
>> > 20051117)
>> > [ 0.000000] ACPI: FACS 3DDBE400, 0040
>> > [ 0.000000] ACPI: APIC 3DDB0390, 005C (r1 LENOVO TP-6A 530
>> > MSFT 97)
>> > [ 0.000000] ACPI: MCFG 3DDB0430, 003C (r1 LENOVO TP-6A 530
>> > MSFT 97)
>> > [ 0.000000] ACPI: SLIC 3DDB0470, 0176 (r1 LENOVO TP-6A 530
>> > MSFT 97)
>> > [ 0.000000] ACPI: ECDT 3DDB0620, 0054 (r1 LENOVO TP-6A 530
>> > MSFT 97)
>> > [ 0.000000] ACPI: DBGP 3DDB03F0, 0034 (r1 LENOVO TP-6A 530
>> > MSFT 97)
>> > [ 0.000000] ACPI: BOOT 3DDB05F0, 0028 (r1 LENOVO TP-6A 530
>> > MSFT 97)
>> > [ 0.000000] ACPI: OEMB 3DDBE440, 0071 (r1 LENOVO TP-6A 530
>> > MSFT 97)
>> > [ 0.000000] ACPI: HPET 3DDBC400, 0038 (r1 LENOVO TP-6A 530
>> > MSFT 97)
>> > [ 0.000000] ACPI: GSCI 3DDBE4C0, 2024 (r1 LENOVO TP-6A 530
>> > MSFT 97)
>> > [ 0.000000] ACPI: ATKG 3DDC06F0, 8024 (r1 LENOVO TP-6A 530
>> > MSFT 97)
>> > [ 0.000000] ACPI: SSDT 3DDC9280, 04E6 (r1 PmRef TP-6A 180
>> > INTL
>> > 20051117)
>> > [ 0.000000] ACPI: PM-Timer IO Port: 0x808
>> > [ 0.000000] ACPI: Local APIC address 0xfee00000
>> > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>> > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>> > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>> > [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
>> > 0-23
>> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
>> > level)
>> > [ 0.000000] ACPI: IRQ0 used by override.
>> > [ 0.000000] ACPI: IRQ2 used by override.
>> > [ 0.000000] ACPI: IRQ9 used by override.
>> > [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
>> > [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
>> > [ 0.000000] Using ACPI (MADT) for SMP configuration information
>> > [ 0.000000] Allocating PCI resources starting at 40000000 (gap:
>> > 3de00000:c1000000)
>> > [ 0.000000] PM: Registered nosave memory: 000000000009e000 -
>> > 000000000009f000
>> > [ 0.000000] PM: Registered nosave memory: 000000000009f000 -
>> > 00000000000a0000
>> > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
>> > 00000000000e3000
>> > [ 0.000000] PM: Registered nosave memory: 00000000000e3000 -
>> > 0000000000100000
>> > [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
>> > [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
>> > [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2
>> > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
>> > Total
>> > pages: 251380
>> > [ 0.000000] Kernel command line: root=/dev/sda3 ro quiet
>> > [ 0.000000] mapped APIC to ffffb000 (fee00000)
>> > [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
>> > [ 0.000000] Enabling fast FPU save and restore... done.
>> > [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
>> > [ 0.000000] Initializing CPU#0
>> > [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
>> > [ 0.000000] Extended CMOS year: 2000
>> > [ 0.000000] Detected 1995.047 MHz processor.
>> > [ 0.004000] Console: colour VGA+ 80x25
>> > [ 0.004000] console [tty0] enabled
>> > [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288
>> > bytes)
>> > [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144
>> > bytes)
>> > [ 0.004000] Memory: 994748k/1013440k available (1769k kernel code,
>> > 18132k
>> > reserved, 752k data, 244k init, 95936k highmem)
>> > [ 0.004000] virtual kernel memory layout:
>> > [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
>> > [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
>> > [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
>> > [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
>> > [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
>> > [ 0.004000] .data : 0xc02ba4d3 - 0xc0376620 ( 752 kB)
>> > [ 0.004000] .text : 0xc0100000 - 0xc02ba4d3 (1769 kB)
>> > [ 0.004000] Checking if this processor honours the WP bit even in
>> > supervisor mode...Ok.
>> > [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
>> > [ 0.004000] hpet clockevent registered
>> > [ 0.083950] Calibrating delay using timer specific routine.. 3994.11
>> > BogoMIPS (lpj=7988225)
>> > [ 0.083979] Security Framework initialized
>> > [ 0.083983] SELinux: Disabled at boot.
>> > [ 0.083986] Capability LSM initialized
>> > [ 0.083998] Mount-cache hash table entries: 512
>> > [ 0.084005] Initializing cgroup subsys ns
>> > [ 0.084005] Initializing cgroup subsys cpuacct
>> > [ 0.084005] Initializing cgroup subsys devices
>> > [ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
>> > [ 0.084005] CPU: L2 cache: 2048K
>> > [ 0.084005] CPU: Physical Processor ID: 0
>> > [ 0.084005] CPU: Processor Core ID: 0
>> > [ 0.084005] Intel machine check architecture supported.
>> > [ 0.084005] Intel machine check reporting enabled on CPU#0.
>> > [ 0.084005] using mwait in idle threads.
>> > [ 0.084005] Checking 'hlt' instruction... OK.
>> > [ 0.100006] ACPI: Core revision 20080321
>> > [ 0.120007] ENABLING IO-APIC IRQs
>> > [ 0.120007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>> > [ 0.159711] CPU0: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz
>> > stepping 0d
>> > [ 0.160010] Booting processor 1/1 ip 6000
>> > [ 0.168010] Initializing CPU#1
>> > [ 0.168010] Calibrating delay using timer specific routine.. 3989.97
>> > BogoMIPS (lpj=7979943)
>> > [ 0.168010] CPU: L1 I cache: 32K, L1 D cache: 32K
>> > [ 0.168010] CPU: L2 cache: 2048K
>> > [ 0.168010] CPU: Physical Processor ID: 0
>> > [ 0.168010] CPU: Processor Core ID: 1
>> > [ 0.168010] Intel machine check architecture supported.
>> > [ 0.168010] Intel machine check reporting enabled on CPU#1.
>> > [ 0.248015] CPU1: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz
>> > stepping 0d
>> > [ 0.248015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>> > [ 0.252015] Brought up 2 CPUs
>> > [ 0.252015] Total of 2 processors activated (7984.08 BogoMIPS).
>> > [ 0.252015] CPU0 attaching sched-domain:
>> > [ 0.252015] domain 0: span 0-1
>> > [ 0.252015] groups: 0 1
>> > [ 0.252015] CPU1 attaching sched-domain:
>> > [ 0.252015] domain 0: span 0-1
>> > [ 0.252015] groups: 1 0
>> > [ 0.252015] net_namespace: 660 bytes
>> > [ 0.252015] Booting paravirtualized kernel on bare hardware
>> > [ 0.252015] NET: Registered protocol family 16
>> > [ 0.252015] ACPI FADT declares the system doesn't support PCIe ASPM,
>> > so
>> > disable it
>> > [ 0.252015] ACPI: bus type pci registered
>> > [ 0.252015] PCI: MCFG configuration 0: base e0000000 segment 0 buses
>> > 0 -
>> > 255
>> > [ 0.252015] PCI: Not using MMCONFIG.
>> > [ 0.252015] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=13
>> > [ 0.252015] PCI: Using configuration type 1 for base access
>> > [ 0.252015] Setting up standard PCI resources
>> > [ 0.252016] ACPI: EC: EC description table is found, configuring boot
>> > EC
>> > [ 0.168011] ACPI: EC: non-query interrupt received, switching to
>> > interrupt mode
>> > [ 0.286037] ACPI: Interpreter enabled
>> > [ 0.286040] ACPI: (supports S0 S1 S3 S4 S5)
>> > [ 0.286059] ACPI: Using IOAPIC for interrupt routing
>> > [ 0.286179] PCI: MCFG configuration 0: base e0000000 segment 0 buses
>> > 0 -
>> > 255
>> > [ 0.289848] PCI: MCFG area at e0000000 reserved in ACPI motherboard
>> > resources
>> > [ 0.289851] PCI: Using MMCONFIG for extended config space
>> > [ 0.307712] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data =
>> > 0x62
>> > [ 0.307712] ACPI: EC: driver started in interrupt mode
>> > [ 0.307712] ACPI: PCI Root Bridge [PCI0] (0000:00)
>> > [ 0.309935] PCI: Transparent bridge - 0000:00:1e.0
>> > [ 0.309935] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> > [ 0.309935] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>> > [ 0.310052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>> > [ 0.310192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
>> > [ 0.310317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>> > [ 0.335746] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11
>> > 12)
>> > [ 0.335746] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
>> > [ 0.335921] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
>> > [ 0.336093] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
>> > [ 0.336267] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
>> > [ 0.336440] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
>> > [ 0.336616] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
>> > [ 0.336790] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
>> > [ 0.341586] ACPI Warning (tbutils-0217): Incorrect checksum in table
>> > [ATKG] - F3, should be B3 [20080321]
>> > [ 0.341599] Linux Plug and Play Support v0.97 (c) Adam Belay
>> > [ 0.342112] pnp: PnP ACPI init
>> > [ 0.342119] ACPI: bus type pnp registered
>> > [ 0.343714] pnp 00:0c: mem resource (0xfdefac00-0xfdf3abff) overlaps
>> > 0000:00:02.0 BAR 0 (0xfdc00000-0xfdffffff), disabling
>> > [ 0.343714] pnp 00:0c: mem resource (0xfdbfac00-0xfdc3abff) overlaps
>> > 0000:00:02.0 BAR 0 (0xfdc00000-0xfdffffff), disabling
>> > [ 0.343714] pnp 00:0c: mem resource (0xfdbfac00-0xfdc3abff) overlaps
>> > 0000:00:02.1 BAR 0 (0xfdb00000-0xfdbfffff), disabling
>> > [ 0.343714] pnp 00:0c: mem resource (0xfe0fac00-0xfe13abff) overlaps
>> > 0000:00:1c.1 BAR 8 (0xfe100000-0xfe1fffff), disabling
>> > [ 0.343714] pnp 00:0c: mem resource (0xfe1fac00-0xfe23abff) overlaps
>> > 0000:00:1c.1 BAR 8 (0xfe100000-0xfe1fffff), disabling
>> > [ 0.343714] pnp 00:0c: mem resource (0xfe1fac00-0xfe23abff) overlaps
>> > 0000:00:1c.2 BAR 8 (0xfe200000-0xfe9fffff), disabling
>> > [ 0.343714] pnp 00:0c: mem resource (0xfe1fac00-0xfe23abff) overlaps
>> > 0000:02:00.0 BAR 0 (0xfe1f0000-0xfe1fffff), disabling
>> > [ 0.344481] pnp: PnP ACPI: found 15 devices
>> > [ 0.344483] ACPI: ACPI bus type pnp unregistered
>> > [ 0.344487] PnPBIOS: Disabled by ACPI PNP
>> > [ 0.347714] PCI: Using ACPI for IRQ routing
>> > [ 0.351215] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>> > [ 0.351220] hpet0: 4 64-bit timers, 14318180 Hz
>> > [ 0.351714] ACPI: RTC can wake from S4
>> > [ 0.354655] system 00:01: iomem range 0xfed10000-0xfed19fff has been
>> > reserved
>> > [ 0.354666] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>> > [ 0.354668] system 00:08: ioport range 0x800-0x87f has been reserved
>> > [ 0.354671] system 00:08: ioport range 0x400-0x41f has been reserved
>> > [ 0.354673] system 00:08: ioport range 0x480-0x4bf has been reserved
>> > [ 0.354676] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been
>> > reserved
>> > [ 0.354679] system 00:08: iomem range 0xfed20000-0xfed3ffff has been
>> > reserved
>> > [ 0.354682] system 00:08: iomem range 0xfed45000-0xfed89fff has been
>> > reserved
>> > [ 0.354685] system 00:08: iomem range 0xfed90000-0xfed90fff has been
>> > reserved
>> > [ 0.354687] system 00:08: iomem range 0xfed91000-0xfed91fff has been
>> > reserved
>> > [ 0.354690] system 00:08: iomem range 0xfed92000-0xfed92fff has been
>> > reserved
>> > [ 0.354693] system 00:08: iomem range 0xfed93000-0xfed93fff has been
>> > reserved
>> > [ 0.354695] system 00:08: iomem range 0xffb00000-0xffbfffff could not
>> > be
>> > reserved
>> > [ 0.354698] system 00:08: iomem range 0xfff00000-0xffffffff could not
>> > be
>> > reserved
>> > [ 0.354705] system 00:0a: iomem range 0xffa00000-0xffbfffff could not
>> > be
>> > reserved
>> > [ 0.354707] system 00:0a: iomem range 0xffe00000-0xffffffff could not
>> > be
>> > reserved
>> > [ 0.354713] system 00:0b: iomem range 0xffc00000-0xffdfffff could not
>> > be
>> > reserved
>> > [ 0.354718] system 00:0c: ioport range 0x250-0x253 has been reserved
>> > [ 0.354721] system 00:0c: ioport range 0x256-0x25f has been reserved
>> > [ 0.354723] system 00:0c: ioport range 0x702-0x703 has been reserved
>> > [ 0.354726] system 00:0c: ioport range 0x4c0-0x4cf has been reserved
>> > [ 0.354728] system 00:0c: ioport range 0x4d2-0x4df has been reserved
>> > [ 0.354731] system 00:0c: ioport range 0x4e0-0x4ef has been reserved
>> > [ 0.354733] system 00:0c: ioport range 0x4f0-0x4ff has been reserved
>> > [ 0.354736] system 00:0c: iomem range 0xfec00000-0xfec00fff has been
>> > reserved
>> > [ 0.354739] system 00:0c: iomem range 0xfee00000-0xfee00fff could not
>> > be
>> > reserved
>> > [ 0.354742] system 00:0c: iomem range 0xf9efc000-0xf9efefff has been
>> > reserved
>> > [ 0.354745] system 00:0c: iomem range 0xf7ffec00-0xf7ffec03 has been
>> > reserved
>> > [ 0.354750] system 00:0d: iomem range 0xe0000000-0xefffffff has been
>> > reserved
>> > [ 0.354756] system 00:0e: iomem range 0x0-0x9ffff could not be
>> > reserved
>> > [ 0.354759] system 00:0e: iomem range 0xc0000-0xcffff could not be
>> > reserved
>> > [ 0.354762] system 00:0e: iomem range 0xe0000-0xfffff could not be
>> > reserved
>> > [ 0.354764] system 00:0e: iomem range 0x100000-0x3ddfffff could not
>> > be
>> > reserved
>> > [ 0.384200] PCI: Bridge: 0000:00:1c.0
>> > [ 0.384200] IO window: disabled.
>> > [ 0.384200] MEM window: disabled.
>> > [ 0.384200] PREFETCH window: disabled.
>> > [ 0.384200] PCI: Bridge: 0000:00:1c.1
>> > [ 0.384200] IO window: disabled.
>> > [ 0.384200] MEM window: 0xfe100000-0xfe1fffff
>> > [ 0.384200] PREFETCH window: disabled.
>> > [ 0.384200] PCI: Bridge: 0000:00:1c.2
>> > [ 0.384200] IO window: 6000-dfff
>> > [ 0.384200] MEM window: 0xfe200000-0xfe9fffff
>> > [ 0.384200] PREFETCH window: 0x00000000fc700000-0x00000000fcefffff
>> > [ 0.384200] PCI: Bridge: 0000:00:1c.3
>> > [ 0.384200] IO window: e000-efff
>> > [ 0.384200] MEM window: 0xfea00000-0xfeafffff
>> > [ 0.384200] PREFETCH window: 0x00000000fcf00000-0x00000000fcffffff
>> > [ 0.384200] PCI: Bridge: 0000:00:1e.0
>> > [ 0.384200] IO window: disabled.
>> > [ 0.384200] MEM window: 0xfeb00000-0xfebfffff
>> > [ 0.384200] PREFETCH window: disabled.
>> > [ 0.384200] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level,
>> > low) ->
>> > IRQ 16
>> > [ 0.384200] PCI: Setting latency timer of device 0000:00:1c.0 to 64
>> > [ 0.384200] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level,
>> > low) ->
>> > IRQ 17
>> > [ 0.384200] PCI: Setting latency timer of device 0000:00:1c.1 to 64
>> > [ 0.384200] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level,
>> > low) ->
>> > IRQ 18
>> > [ 0.384200] PCI: Setting latency timer of device 0000:00:1c.2 to 64
>> > [ 0.384200] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level,
>> > low) ->
>> > IRQ 19
>> > [ 0.384200] PCI: Setting latency timer of device 0000:00:1c.3 to 64
>> > [ 0.384200] PCI: Setting latency timer of device 0000:00:1e.0 to 64
>> > [ 0.384200] NET: Registered protocol family 2
>> > [ 0.394283] IP route cache hash table entries: 32768 (order: 5,
>> > 131072
>> > bytes)
>> > [ 0.394500] TCP established hash table entries: 131072 (order: 8,
>> > 1048576
>> > bytes)
>> > [ 0.394888] TCP bind hash table entries: 65536 (order: 7, 524288
>> > bytes)
>> > [ 0.395113] TCP: Hash tables configured (established 131072 bind
>> > 65536)
>> > [ 0.395116] TCP reno registered
>> > [ 0.398291] NET: Registered protocol family 1
>> > [ 0.398386] checking if image is initramfs...<7>Switched to high
>> > resolution mode on CPU 1
>> > [ 0.510167] Switched to high resolution mode on CPU 0
>> > [ 0.625496] it is
>> > [ 0.871153] Freeing initrd memory: 6054k freed
>> > [ 0.871153] Simple Boot Flag at 0x51 set to 0x1
>> > [ 0.873186] audit: initializing netlink socket (disabled)
>> > [ 0.873202] type=2000 audit(1244407461.864:1): initialized
>> > [ 0.873497] highmem bounce pool size: 64 pages
>> > [ 0.873497] Total HugeTLB memory allocated, 0
>> > [ 0.873497] VFS: Disk quotas dquot_6.5.1
>> > [ 0.873497] Dquot-cache hash table entries: 1024 (order 0, 4096
>> > bytes)
>> > [ 0.873497] msgmni has been set to 1767
>> > [ 0.873497] Block layer SCSI generic (bsg) driver version 0.4 loaded
>> > (major 253)
>> > [ 0.873497] io scheduler noop registered
>> > [ 0.873497] io scheduler anticipatory registered
>> > [ 0.873497] io scheduler deadline registered
>> > [ 0.873497] io scheduler cfq registered (default)
>> > [ 0.873497] pci 0000:00:02.0: Boot video device
>> > [ 0.873497] PCI: Setting latency timer of device 0000:00:1c.0 to 64
>> > [ 0.873497] assign_interrupt_mode Found MSI capability
>> > [ 0.873497] Allocate Port Service[0000:00:1c.0:pcie00]
>> > [ 0.873497] Allocate Port Service[0000:00:1c.0:pcie03]
>> > [ 0.873497] PCI: Setting latency timer of device 0000:00:1c.1 to 64
>> > [ 0.873497] assign_interrupt_mode Found MSI capability
>> > [ 0.873497] Allocate Port Service[0000:00:1c.1:pcie00]
>> > [ 0.873497] Allocate Port Service[0000:00:1c.1:pcie03]
>> > [ 0.873497] PCI: Setting latency timer of device 0000:00:1c.2 to 64
>> > [ 0.873497] assign_interrupt_mode Found MSI capability
>> > [ 0.873497] Allocate Port Service[0000:00:1c.2:pcie00]
>> > [ 0.873497] Allocate Port Service[0000:00:1c.2:pcie02]
>> > [ 0.873497] Allocate Port Service[0000:00:1c.2:pcie03]
>> > [ 0.873497] PCI: Setting latency timer of device 0000:00:1c.3 to 64
>> > [ 0.873497] assign_interrupt_mode Found MSI capability
>> > [ 0.873497] Allocate Port Service[0000:00:1c.3:pcie00]
>> > [ 0.873497] Allocate Port Service[0000:00:1c.3:pcie03]
>> > [ 0.873498] isapnp: Scanning for PnP cards...
>> > [ 1.226881] isapnp: No Plug & Play device found
>> > [ 1.229498] hpet_resources: 0xfed00000 is busy
>> > [ 1.229498] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
>> > sharing enabled
>> > [ 1.229509] brd: module loaded
>> > [ 1.229509] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
>> > 0x60,0x64
>> > irq 1,12
>> > [ 1.233650] i8042.c: Detected active multiplexing controller, rev
>> > 1.1.
>> > [ 1.236170] serio: i8042 KBD port at 0x60,0x64 irq 1
>> > [ 1.236175] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>> > [ 1.236178] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>> > [ 1.236180] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>> > [ 1.236182] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>> > [ 1.238473] mice: PS/2 mouse device common for all mice
>> > [ 1.238474] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>> > [ 1.238474] rtc0: alarms up to one month, y3k
>> > [ 1.238474] cpuidle: using governor ladder
>> > [ 1.238474] cpuidle: using governor menu
>> > [ 1.238474] No iBFT detected.
>> > [ 1.238474] TCP cubic registered
>> > [ 1.238474] NET: Registered protocol family 17
>> > [ 1.238474] Using IPI No-Shortcut mode
>> > [ 1.238474] registered taskstats version 1
>> > [ 1.238474] rtc_cmos 00:03: setting system clock to 2009-06-07
>> > 20:44:23
>> > UTC (1244407463)
>> > [ 1.238474] Freeing unused kernel memory: 244k freed
>> > [ 1.315582] ACPI Warning (tbutils-0217): Incorrect checksum in table
>> > [SSDT] - E4, should be 73 [20080321]
>> > [ 1.315582] ACPI: SSDT 3DDC87F0, 0286 (r1 PmRef TP-6A 180
>> > INTL
>> > 20051117)
>> > [ 1.315582] ACPI: SSDT 3DDC8B10, 0765 (r1 PmRef Cpu0Cst 3001
>> > INTL
>> > 20051117)
>> > [ 1.318445] Monitor-Mwait will be used to enter C-1 state
>> > [ 1.318445] Monitor-Mwait will be used to enter C-3 state
>> > [ 1.318445] ACPI: CPU0 (power states: C1[C1] C2[C3])
>> > [ 1.318445] ACPI: ACPI0007:00 is registered as cooling_device0
>> > [ 1.318445] ACPI: Processor [P001] (supports 8 throttling states)
>> > [ 1.318445] ACPI Warning (tbutils-0217): Incorrect checksum in table
>> > [SSDT] - 37, should be C7 [20080321]
>> > [ 1.318445] ACPI: SSDT 3DDC8720, 00C8 (r1 PmRef TP-6A 180
>> > INTL
>> > 20051117)
>> > [ 1.318445] ACPI: SSDT 3DDC8A80, 0085 (r1 PmRef Cpu1Cst 3000
>> > INTL
>> > 20051117)
>> > [ 1.318445] Marking TSC unstable due to: TSC halts in idle.
>> > [ 1.322047] ACPI: CPU1 (power states: C1[C1] C2[C3])
>> > [ 1.322047] ACPI: ACPI0007:01 is registered as cooling_device1
>> > [ 1.322047] ACPI: Processor [P002] (supports 8 throttling states)
>> > [ 1.340950] ACPI: Expecting a [Reference] package element, found type
>> > C
>> > [ 1.340978] ACPI: LNXTHERM:01 is registered as thermal_zone0
>> > [ 1.343028] input: AT Translated Set 2 keyboard as
>> > /class/input/input0
>> > [ 1.377641] ACPI: Thermal Zone [THRM] (44 C)
>> > [ 1.513402] usbcore: registered new interface driver usbfs
>> > [ 1.513402] usbcore: registered new interface driver hub
>> > [ 1.513402] usbcore: registered new device driver usb
>> > [ 1.513402] USB Universal Host Controller Interface driver v3.0
>> > [ 1.513402] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level,
>> > low) ->
>> > IRQ 16
>> > [ 1.513402] PCI: Setting latency timer of device 0000:00:1a.0 to 64
>> > [ 1.513402] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>> > [ 1.513402] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
>> > bus
>> > number 1
>> > [ 1.513402] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00005880
>> > [ 1.513402] usb usb1: configuration #1 chosen from 1 choice
>> > [ 1.513402] hub 1-0:1.0: USB hub found
>> > [ 1.513402] hub 1-0:1.0: 2 ports detected
>> > [ 1.620522] usb usb1: New USB device found, idVendor=1d6b,
>> > idProduct=0001
>> > [ 1.620526] usb usb1: New USB device strings: Mfr=3, Product=2,
>> > SerialNumber=1
>> > [ 1.620528] usb usb1: Product: UHCI Host Controller
>> > [ 1.620530] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
>> > [ 1.620532] usb usb1: SerialNumber: 0000:00:1a.0
>> > [ 1.622358] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level,
>> > low) ->
>> > IRQ 21
>> > [ 1.622358] PCI: Setting latency timer of device 0000:00:1a.1 to 64
>> > [ 1.622358] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>> > [ 1.622358] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
>> > bus
>> > number 2
>> > [ 1.622358] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00005800
>> > [ 1.622358] usb usb2: configuration #1 chosen from 1 choice
>> > [ 1.622358] hub 2-0:1.0: USB hub found
>> > [ 1.622358] hub 2-0:1.0: 2 ports detected
>> > [ 1.726003] usb usb2: New USB device found, idVendor=1d6b,
>> > idProduct=0001
>> > [ 1.726006] usb usb2: New USB device strings: Mfr=3, Product=2,
>> > SerialNumber=1
>> > [ 1.726009] usb usb2: Product: UHCI Host Controller
>> > [ 1.726011] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
>> > [ 1.726013] usb usb2: SerialNumber: 0000:00:1a.1
>> > [ 1.727589] ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level,
>> > low) ->
>> > IRQ 19
>> > [ 1.727589] PCI: Setting latency timer of device 0000:00:1a.2 to 64
>> > [ 1.727589] uhci_hcd 0000:00:1a.2: UHCI Host Controller
>> > [ 1.727589] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
>> > bus
>> > number 3
>> > [ 1.727589] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00005480
>> > [ 1.727589] usb usb3: configuration #1 chosen from 1 choice
>> > [ 1.727589] hub 3-0:1.0: USB hub found
>> > [ 1.727589] hub 3-0:1.0: 2 ports detected
>> > [ 1.738189] No dock devices found.
>> > [ 1.744366] SCSI subsystem initialized
>> > [ 1.784174] libata version 3.00 loaded.
>> > [ 1.784174] sdhci: Secure Digital Host Controller Interface driver
>> > [ 1.784174] sdhci: Copyright(c) Pierre Ossman
>> > [ 1.786118] ricoh-mmc: Ricoh MMC Controller disabling driver
>> > [ 1.786120] ricoh-mmc: Copyright(c) Philip Langdale
>> > [ 1.830368] usb usb3: New USB device found, idVendor=1d6b,
>> > idProduct=0001
>> > [ 1.830371] usb usb3: New USB device strings: Mfr=3, Product=2,
>> > SerialNumber=1
>> > [ 1.830374] usb usb3: Product: UHCI Host Controller
>> > [ 1.830375] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
>> > [ 1.830377] usb usb3: SerialNumber: 0000:00:1a.2
>> > [ 1.832300] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level,
>> > low) ->
>> > IRQ 18
>> > [ 1.832300] PCI: Setting latency timer of device 0000:00:1a.7 to 64
>> > [ 1.832300] ehci_hcd 0000:00:1a.7: EHCI Host Controller
>> > [ 1.832300] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
>> > bus
>> > number 4
>> > [ 1.836172] ehci_hcd 0000:00:1a.7: debug port 1
>> > [ 1.836172] PCI: cache line size of 32 is not supported by device
>> > 0000:00:1a.7
>> > [ 1.836172] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe0fbc00
>> > [ 1.851728] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver
>> > 10
>> > Dec 2004
>> > [ 1.851811] usb usb4: configuration #1 chosen from 1 choice
>> > [ 1.851853] hub 4-0:1.0: USB hub found
>> > [ 1.851866] hub 4-0:1.0: 6 ports detected
>> > [ 1.955528] usb usb4: New USB device found, idVendor=1d6b,
>> > idProduct=0002
>> > [ 1.955533] usb usb4: New USB device strings: Mfr=3, Product=2,
>> > SerialNumber=1
>> > [ 1.955542] usb usb4: Product: EHCI Host Controller
>> > [ 1.955544] usb usb4: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
>> > [ 1.955545] usb usb4: SerialNumber: 0000:00:1a.7
>> > [ 1.956274] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level,
>> > low) ->
>> > IRQ 23
>> > [ 1.956274] PCI: Setting latency timer of device 0000:00:1d.0 to 64
>> > [ 1.956274] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>> > [ 1.956274] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
>> > bus
>> > number 5
>> > [ 1.956274] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005400
>> > [ 1.956274] usb usb5: configuration #1 chosen from 1 choice
>> > [ 1.956274] hub 5-0:1.0: USB hub found
>> > [ 1.956274] hub 5-0:1.0: 2 ports detected
>> > [ 2.016095] Clocksource tsc unstable (delta = -189448159 ns)
>> > [ 2.059545] usb usb5: New USB device found, idVendor=1d6b,
>> > idProduct=0001
>> > [ 2.059550] usb usb5: New USB device strings: Mfr=3, Product=2,
>> > SerialNumber=1
>> > [ 2.059553] usb usb5: Product: UHCI Host Controller
>> > [ 2.059556] usb usb5: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
>> > [ 2.059559] usb usb5: SerialNumber: 0000:00:1d.0
>> > [ 2.060271] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level,
>> > low) ->
>> > IRQ 19
>> > [ 2.060271] PCI: Setting latency timer of device 0000:00:1d.1 to 64
>> > [ 2.060271] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>> > [ 2.060271] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
>> > bus
>> > number 6
>> > [ 2.060271] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
>> > [ 2.060271] usb usb6: configuration #1 chosen from 1 choice
>> > [ 2.060271] hub 6-0:1.0: USB hub found
>> > [ 2.060271] hub 6-0:1.0: 2 ports detected
>> > [ 2.163674] usb usb6: New USB device found, idVendor=1d6b,
>> > idProduct=0001
>> > [ 2.163678] usb usb6: New USB device strings: Mfr=3, Product=2,
>> > SerialNumber=1
>> > [ 2.163682] usb usb6: Product: UHCI Host Controller
>> > [ 2.163685] usb usb6: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
>> > [ 2.163688] usb usb6: SerialNumber: 0000:00:1d.1
>> > [ 2.164271] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level,
>> > low) ->
>> > IRQ 18
>> > [ 2.164271] PCI: Setting latency timer of device 0000:00:1d.2 to 64
>> > [ 2.164271] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>> > [ 2.164271] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
>> > bus
>> > number 7
>> > [ 2.164271] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005000
>> > [ 2.164271] usb usb7: configuration #1 chosen from 1 choice
>> > [ 2.164271] hub 7-0:1.0: USB hub found
>> > [ 2.164271] hub 7-0:1.0: 2 ports detected
>> > [ 2.267730] usb usb7: New USB device found, idVendor=1d6b,
>> > idProduct=0001
>> > [ 2.267735] usb usb7: New USB device strings: Mfr=3, Product=2,
>> > SerialNumber=1
>> > [ 2.267739] usb usb7: Product: UHCI Host Controller
>> > [ 2.267742] usb usb7: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
>> > [ 2.267750] usb usb7: SerialNumber: 0000:00:1d.2
>> > [ 2.268273] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level,
>> > low) ->
>> > IRQ 23
>> > [ 2.268273] PCI: Setting latency timer of device 0000:00:1d.7 to 64
>> > [ 2.268273] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>> > [ 2.268273] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
>> > bus
>> > number 8
>> > [ 2.272480] ehci_hcd 0000:00:1d.7: debug port 1
>> > [ 2.272480] PCI: cache line size of 32 is not supported by device
>> > 0000:00:1d.7
>> > [ 2.272480] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe0fb800
>> > [ 2.286363] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
>> > 10
>> > Dec 2004
>> > [ 2.286440] usb usb8: configuration #1 chosen from 1 choice
>> > [ 2.286468] hub 8-0:1.0: USB hub found
>> > [ 2.286475] hub 8-0:1.0: 6 ports detected
>> > [ 2.391223] usb usb8: New USB device found, idVendor=1d6b,
>> > idProduct=0002
>> > [ 2.391227] usb usb8: New USB device strings: Mfr=3, Product=2,
>> > SerialNumber=1
>> > [ 2.391229] usb usb8: Product: EHCI Host Controller
>> > [ 2.391231] usb usb8: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
>> > [ 2.391233] usb usb8: SerialNumber: 0000:00:1d.7
>> > [ 2.394333] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>> > [ 2.394333] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 19 (level,
>> > low) ->
>> > IRQ 19
>> > [ 2.394333] PCI: Setting latency timer of device 0000:0c:00.0 to 64
>> > [ 2.394333] ahci 0000:00:1f.2: version 3.0
>> > [ 2.394333] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level,
>> > low) ->
>> > IRQ 19
>> > [ 2.394443] eth0: RTL8168c/8111c at 0xf88e0000, 00:22:15:69:eb:43,
>> > XID
>> > 3c4000c0 IRQ 219
>> > [ 2.394333] ACPI: PCI Interrupt 0000:0d:00.0[A] -> GSI 16 (level,
>> > low) ->
>> > IRQ 16
>> > [ 2.446246] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]
>> > MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/4]
>> > [ 2.455105] sdhci: SDHCI controller found at 0000:0d:00.1 [1180:0822]
>> > (rev 22)
>> > [ 2.455105] ACPI: PCI Interrupt 0000:0d:00.1[B] -> GSI 17 (level,
>> > low) ->
>> > IRQ 17
>> > [ 2.456112] mmc0: Will use DMA mode even though HW doesn't fully
>> > claim to
>> > support it.
>> > [ 2.456474] mmc0: SDHCI at 0xfebff400 irq 17 DMA
>> > [ 2.725032] usb 8-5: new high speed USB device using ehci_hcd and
>> > address
>> > 2
>> > [ 3.353367] usb 8-5: configuration #1 chosen from 1 choice
>> > [ 3.354717] usb 8-5: New USB device found, idVendor=17ef,
>> > idProduct=480b
>> > [ 3.354717] usb 8-5: New USB device strings: Mfr=0, Product=1,
>> > SerialNumber=0
>> > [ 3.354717] usb 8-5: Product: Integrated Camera
>> > [ 3.401351] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps
>> > 0x33 impl SATA mode
>> > [ 3.401355] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo
>> > pio
>> > slum part
>> > [ 3.401360] PCI: Setting latency timer of device 0000:00:1f.2 to 64
>> > [ 3.403435] scsi0 : ahci
>> > [ 3.403435] scsi1 : ahci
>> > [ 3.403435] scsi2 : ahci
>> > [ 3.403435] scsi3 : ahci
>> > [ 3.403435] scsi4 : ahci
>> > [ 3.403435] scsi5 : ahci
>> > [ 3.403435] ata1: SATA max UDMA/133 abar m2048@0xfe0fb000 port
>> > 0xfe0fb100
>> > irq 218
>> > [ 3.403435] ata2: SATA max UDMA/133 irq_stat 0x00000040, connection
>> > status changed irq 218
>> > [ 3.403435] ata3: DUMMY
>> > [ 3.403435] ata4: DUMMY
>> > [ 3.403435] ata5: SATA max UDMA/133 abar m2048@0xfe0fb000 port
>> > 0xfe0fb300
>> > irq 218
>> > [ 3.403435] ata6: SATA max UDMA/133 abar m2048@0xfe0fb000 port
>> > 0xfe0fb380
>> > irq 218
>> > [ 3.720986] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> > [ 3.723453] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>> > [ 3.723530] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
>> > [ 3.723530] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>> > [ 3.724264] ieee1394: Host added: ID:BUS[0-00:1023]
>> > GUID[00061b000080814c]
>> > [ 3.727733] ata1.00: ATA-8: SAMSUNG HM160HI, HH100-05, max UDMA/133
>> > [ 3.727733] ata1.00: 312581808 sectors, multi 0: LBA48
>> > [ 3.732382] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>> > [ 3.735361] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
>> > [ 3.735361] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>> > [ 3.739527] ata1.00: configured for UDMA/133
>> > [ 4.477725] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> > [ 4.480477] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
>> > [ 4.480480] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>> > [ 4.480708] ata2.00: ATAPI: MATSHITADVD-RAM UJ870A, SB23, max UDMA/33
>> > [ 4.485476] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
>> > [ 4.485476] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>> > [ 4.485476] ata2.00: configured for UDMA/33
>> > [ 4.821748] ata5: SATA link down (SStatus 0 SControl 300)
>> > [ 5.158642] ata6: SATA link down (SStatus 0 SControl 300)
>> > [ 5.174533] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160HI
>> > HH10 PQ: 0 ANSI: 5
>> > [ 5.175937] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ870A
>> > SB23 PQ: 0 ANSI: 5
>> > [ 5.175937] ricoh-mmc: Ricoh MMC controller found at 0000:0d:00.2
>> > [1180:0843] (rev 12)
>> > [ 5.175937] ricoh-mmc: Controller is now disabled.
>> > [ 5.191491] Driver 'sd' needs updating - please use bus_type methods
>> > [ 5.191491] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors
>> > (160042
>> > MB)
>> > [ 5.191491] sd 0:0:0:0: [sda] Write Protect is off
>> > [ 5.191491] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> > [ 5.191491] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
>> > enabled,
>> > doesn't support DPO or FUA
>> > [ 5.191491] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors
>> > (160042
>> > MB)
>> > [ 5.191512] sd 0:0:0:0: [sda] Write Protect is off
>> > [ 5.191515] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> > [ 5.191546] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
>> > enabled,
>> > doesn't support DPO or FUA
>> > [ 5.191551] sda:<4>Driver 'sr' needs updating - please use bus_type
>> > methods
>> > [ 5.223202] sda1 sda2 sda3 sda4 < sda5 >
>> > [ 5.238064] sd 0:0:0:0: [sda] Attached SCSI disk
>> > [ 5.239492] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
>> > xa/form2
>> > cdda tray
>> > [ 5.239492] Uniform CD-ROM driver Revision: 3.20
>> > [ 5.239492] sr 1:0:0:0: Attached scsi CD-ROM sr0
>> > [ 5.249994] sd 0:0:0:0: Attached scsi generic sg0 type 0
>> > [ 5.249994] sr 1:0:0:0: Attached scsi generic sg1 type 5
>> > [ 5.479401] PM: Starting manual resume from disk
>> > [ 5.517395] kjournald starting. Commit interval 5 seconds
>> > [ 5.517395] EXT3-fs: mounted filesystem with ordered data mode.
>> > [ 6.873462] udevd version 125 started
>> > [ 7.404638] Non-volatile memory driver v1.2
>> > [ 7.515252] Linux agpgart interface v0.103
>> > [ 7.540312] input: Power Button (FF) as /class/input/input1
>> > [ 7.601710] ACPI: Power Button (FF) [PWRF]
>> > [ 7.601820] input: Sleep Button (CM) as /class/input/input2
>> > [ 7.667066] ACPI: Sleep Button (CM) [SLPB]
>> > [ 7.667121] input: Lid Switch as /class/input/input3
>> > [ 7.699297] agpgart: Detected an Intel Mobile Intel? GM45 Express
>> > Chipset.
>> > [ 7.699297] agpgart: Detected 32764K stolen memory.
>> > [ 7.700130] ACPI: Lid Switch [LID]
>> > [ 7.711296] agpgart: AGP aperture is 256M @ 0xd0000000
>> > [ 7.727297] ACPI: AC Adapter [AC0] (on-line)
>> > [ 7.758587] thinkpad_acpi: Not yet supported ThinkPad detected!
>> > [ 7.865944] ACPI: Battery Slot [BAT0] (battery present)
>> > [ 8.172085] ACPI: device:1e is registered as cooling_device2
>> > [ 8.172085] input: Video Bus as /class/input/input4
>> > [ 8.226411] ACPI: Video Device [VGA] (multi-head: yes rom: no post:
>> > no)
>> > [ 8.226432] proc_dir_entry 'VGA' already registered
>> > [ 8.226435] Pid: 1537, comm: modprobe Not tainted 2.6.26-1-686 #1
>> > [ 8.226444] [<c01a440d>] proc_register+0xb4/0x11f
>> > [ 8.226451] [<c01a45f0>] proc_mkdir_mode+0x2b/0x3d
>> > [ 8.226455] [<f899dff4>] acpi_video_bus_add+0x177/0xae4 [video]
>> > [ 8.226462] [<c01ad3d4>] sysfs_find_dirent+0x13/0x23
>> > [ 8.226467] [<c01adf64>] sysfs_create_link+0x99/0xdd
>> > [ 8.226472] [<c02166ee>] acpi_device_probe+0x33/0x7c
>> > [ 8.226477] [<c023a981>] __driver_attach+0x0/0x55
>> > [ 8.226481] [<c023a90a>] driver_probe_device+0xb5/0x12c
>> > [ 8.226485] [<c023a9b8>] __driver_attach+0x37/0x55
>> > [ 8.226489] [<c023a24b>] bus_for_each_dev+0x37/0x59
>> > [ 8.226493] [<c023a7a5>] driver_attach+0x11/0x13
>> > [ 8.226497] [<c023a981>] __driver_attach+0x0/0x55
>> > [ 8.226500] [<c023a5a8>] bus_add_driver+0x8a/0x1a6
>> > [ 8.226503] [<c01ddbdc>] kset_find_obj+0x20/0x4b
>> > [ 8.226508] [<c023ab99>] driver_register+0x6d/0xc1
>> > [ 8.226512] [<f896002f>] acpi_video_init+0x2f/0x4d [video]
>> > [ 8.226516] [<c013f5cb>] sys_init_module+0x186c/0x19dc
>> > [ 8.226521] [<c018a54d>] seq_open+0x4d/0x6a
>> > [ 8.226530] [<f8995000>] cfg80211_exit+0x0/0x1e [cfg80211]
>> > [ 8.226535] [<c0166365>] vma_link+0xa3/0xbd
>> > [ 8.226541] [<c02169c8>] acpi_bus_register_driver+0x0/0x38
>> > [ 8.226551] [<c0103853>] sysenter_past_esp+0x78/0xb1
>> > [ 8.226556] [<c02b0000>] acpi_pci_root_add+0x101/0x296
>> > [ 8.226561] =======================
>> > [ 8.231307] ACPI: device:23 is registered as cooling_device3
>> > [ 8.231307] input: Video Bus as /class/input/input5
>> > [ 8.285331] ACPI: Video Device [VGA] (multi-head: yes rom: no post:
>> > no)
>> > [ 8.294993] Linux video capture interface: v2.00
>> > [ 8.347306] input: PC Speaker as /class/input/input6
>> > [ 8.478847] uvcvideo: Found UVC 1.00 device Integrated Camera
>> > (17ef:480b)
>> > [ 8.513145] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level,
>> > low) ->
>> > IRQ 17
>> > [ 8.513157] PCI: Setting latency timer of device 0000:02:00.0 to 64
>> > [ 8.513179] ath5k_pci 0000:02:00.0: registered as 'phy0'
>> > [ 8.517905] ath5k phy0: Support for RF2425 is under development.
>> > [ 8.534848] uvcvideo: Failed to query (135) UVC control 1 (unit 0) :
>> > -32
>> > (exp. 26).
>> > [ 8.554848] phy0: Selected rate control algorithm 'pid'
>> > [ 8.648105] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY:
>> > 0x70)
>> > [ 8.900376] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level,
>> > low) ->
>> > IRQ 22
>> > [ 8.900376] PCI: Setting latency timer of device 0000:00:1b.0 to 64
>> > [ 9.114769] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps:
>> > 0xd04791/0xb00000
>> > [ 9.114769] serio: Synaptics pass-through port at
>> > isa0060/serio4/input0
>> > [ 9.157137] input: SynPS/2 Synaptics TouchPad as /class/input/input7
>> > [ 9.221847] usbcore: registered new interface driver uvcvideo
>> > [ 9.221850] USB Video Class driver (v0.1.0)
>> > [ 10.080012] Adding 979924k swap on /dev/sda1. Priority:-1 extents:1
>> > across:979924k
>> > [ 10.358420] hda_intel: azx_get_response timeout, switching to polling
>> > mode: last cmd=0x014b2001
>> > [ 10.467086] EXT3 FS on sda3, internal journal
>> > [ 11.076829] loop: module loaded
>> > [ 12.189977] kjournald starting. Commit interval 5 seconds
>> > [ 12.190174] EXT3 FS on sda5, internal journal
>> > [ 12.190174] EXT3-fs: mounted filesystem with ordered data mode.
>> > [ 14.130282] r8169: eth0: link up
>> > [ 14.130282] r8169: eth0: link up
>> > [ 14.929922] IBM TrackPoint firmware: 0x0e, buttons: 3/3
>> > [ 15.170801] input: TPPS/2 IBM TrackPoint as /class/input/input8
>> > [ 17.326879] NET: Registered protocol family 10
>> > [ 17.326879] lo: Disabled Privacy Extensions
>> > [ 18.604971] lp: driver loaded but no devices found
>> > [ 18.670814] ppdev: user-space parallel port driver
>> > [ 22.816456] Bluetooth: Core ver 2.11
>> > [ 22.816456] NET: Registered protocol family 31
>> > [ 22.816456] Bluetooth: HCI device and connection manager initialized
>> > [ 22.816456] Bluetooth: HCI socket layer initialized
>> > [ 22.901652] Bluetooth: L2CAP ver 2.9
>> > [ 22.901652] Bluetooth: L2CAP socket layer initialized
>> > [ 23.021613] Bluetooth: RFCOMM socket layer initialized
>> > [ 23.021613] Bluetooth: RFCOMM TTY layer initialized
>> > [ 23.021613] Bluetooth: RFCOMM ver 1.8
>> > [ 23.227575] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> > [ 25.692687] mtrr: no more MTRRs available
>> > [ 25.692790] mtrr: no more MTRRs available
>> > [ 25.692833] mtrr: no more MTRRs available
>> > [ 25.692874] mtrr: no more MTRRs available
>> > [ 40.692135] eth0: no IPv6 routers present
>> > [ 52.573499] CPU0 attaching NULL sched-domain.
>> > [ 52.573515] CPU1 attaching NULL sched-domain.
>> > [ 52.574399] CPU0 attaching sched-domain:
>> > [ 52.574409] domain 0: span 0-1
>> > [ 52.574415] groups: 0 1
>> > [ 52.574424] CPU1 attaching sched-domain:
>> > [ 52.574429] domain 0: span 0-1
>> > [ 52.574434] groups: 1 0
>> > [ 424.642961] UDF-fs: No VRS found
>> > [ 424.707725] ISO 9660 Extensions: Microsoft Joliet Level 3
>> > [ 424.930490] ISO 9660 Extensions: RRIP_1991A
>> > [ 1854.695902] usb 6-2: new low speed USB device using uhci_hcd and
>> > address
>> > 2
>> > [ 1854.863657] usb 6-2: configuration #1 chosen from 1 choice
>> > [ 1854.866667] usb 6-2: New USB device found, idVendor=1bcf,
>> > idProduct=0007
>> > [ 1854.866667] usb 6-2: New USB device strings: Mfr=0, Product=2,
>> > SerialNumber=0
>> > [ 1854.866667] usb 6-2: Product: USB Optical Mouse
>> > [ 1854.975465] usbcore: registered new interface driver hiddev
>> > [ 1854.994125] input: USB Optical Mouse as /class/input/input9
>> > [ 1854.997326] input,hiddev96,hidraw0: USB HID v1.10 Mouse [USB Optical
>> > Mouse] on usb-0000:00:1d.1-2
>> > [ 1854.997358] usbcore: registered new interface driver usbhid
>> > [ 1854.997363] usbhid: v2.6:USB HID core driver
>> >
>> > 2009/6/5 Alexandre Pereira Bühler <buhler@infobrindes.com.br>
>> >>
>> >> Vá no repositório e instale o módulo gspca correto para sua arquitetura
>> >> e
>> >> veja se a webcam funciona após reiniciar.
>> >>
>> >> --
>> >> Alexandre Pereira Bühler
>> >> Linux User: 397.546
>> >>
>> >> Simão & Bühler Ltda (Infobrindes)
>> >> Instalação, manutenção e venda de servidores GNU/Linux.
>> >> http://www.simaoebuhler.com.br
>> >> alexandre@simaoebuhler.com.br
>> >>
>> >> Brindes e material promocional.
>> >> http://www.infobrindes.com.br
>> >> alexandre@infobrindes.com.br
>> >> Telefones: (41) 3538-5428 / (41) 3532-5428
>> >>
>> >> Colunista: www.delphisophp.com
>> >> Owner: http://br.groups.yahoo.com/group/freepascal/
>> >> Liberdade é essencial. Use GNU/Linux.
>> >>
>> >>
>> >>
>> >> --
>> >> To UNSUBSCRIBE, email to
>> >> debian-user-portuguese-REQUEST@lists.debian.org
>> >> with a subject of "unsubscribe". Trouble? Contact
>> >> listmaster@lists.debian.org
>> >>
>> >
>> >
>
>
Reply to:
- References:
- webcan
- From: Gusmão Silva <andergusmao@gmail.com>
- Re: webcan
- From: Carlos Eduardo <clsed_u@yahoo.com.br>
- Re: webcan
- From: Alexandre Pereira Bühler <buhler@infobrindes.com.br>
- Re: webcan
- From: Felipe Cabral <felipehistory@gmail.com>
- Re: webcan
- From: Eduardo Rodrigues da Luz <eduardo.r.luz@gmail.com>