Fwd: ATI X300 ???

Em 16/10/06, igor Scarinci Brandão <igorsb@hotmail.com > escreveu:

Olá de novo... rsrsr
Acho que me preciptei um polgo no meu julgamento de tudo ok... rsrs
O 3d nao ta funcionando ainda... Eu coloquei o xorg que vc me passou mas
mesmo assim o 3d nao funfa.
O glxgears funciona, mas o fglrx_gears fica muuuuuiiiiiittoooo lento.
E da uma mensagem estranha olha só:
Using GLX_SGIX_pbuffer
X Error of failed request:  BadMatch (invalid parameter attributes)
  Major opcode of failed request:  143 (GLX)
  Minor opcode of failed request:  5 (X_GLXMakeCurrent)
  Serial number of failed request:  33
  Current serial number in output stream:  33

O que será que ta faltando aí?

Ass: ISB
I Look to the pool and i see de moon...
I Look to the moon, Where is the pool???

>From: Dani <daninorte@gmail.com>
>To: "igor Scarinci Brandão" < igorsb@hotmail.com>
>CC: debian-user-portuguese@lists.debian.org
>Subject: Re: ATI X300 ???
>Date: Mon, 16 Oct 2006 02:03:49 -0200
>
>oi! :-) vc pode usar o instalador da nvidia pra remover "quase" tudo :-)
>mas
>faca
>um backup do xorg.conf :-)
>o seu driver da nvidia e' o 1.0.8756 :-) ele esta nos "archive"; para
>facilitar faca o download do
>
>
> http://download.nvidia.com/XFree86/Linux-x86/1.0-8756/NVIDIA-Linux-x86-1.0-8756-pkg1.run
>
>quando terminar o download faca como root:
>
>sh ./NVIDIA-Linux-x86-1.0-8756-pkg1.run --uninstall
>
>e torca os dedos:-) e nao esqueca de rezar uma ave-maria por nos:-)
>-------------------------------------cut---------------------------:-)
>Se nao der certo (verifique antes se o xorg.conf continua o mesmo:-) pois o
>--uninstall
>  remove o atual e restaura outro que existia no momento da instalacao do
>nvidia)
>  continue e remova o libglx.so na mao(!)
>
>rm /usr/X11R6/lib/modules/extensions/libglx.so
>e use os itens (2)  e (3) da mensagem anterior :-)
>
>Em 16/10/06, igor Scarinci Brandão < igorsb@hotmail.com> escreveu:
>>
>>é verdade... eu to fazendo a faxina nas bibliotecas da nvidia aqui. Eu
>>tinha
>>uma gforce agp instalada, mas fiz um upgrade nessa maquina e a placa mae
>>nova nao tem agp entao ficaram esses resquissios aí.
>>Mas tem um problema.... eu nao instalei o driver da nvidia via apt eu
>>instalei a patir daquele  fonte
>>NVIDIA.run
>>Tem uma maneira mais facil de remover esses arquivos? Ou tem que ser na
>>unha
>>mesmo?
>>Prq como nao foram instalados via apt eu vou ter que ir com rm um por um
>>nao!?
>>Mais uma vez obrigado... e me desculpe pela novela...rsrsr
>>Abracao t+
>>Ass: ISB
>>I Look to the pool and i see de moon...
>>I Look to the moon, Where is the pool???
>>
>>
>>
>>
>> >From: Dani <daninorte@gmail.com>
>> >To: "igor Scarinci Brandão" < igorsb@hotmail.com>
>> >CC: debian-user-portuguese@lists.debian.org
>> >Subject: Re: ATI X300 ???
>> >Date: Sun, 15 Oct 2006 20:28:53 -0200
>> >
>> >ahA! ta'quase tudo certo! :-)
>> >
>> >o x ta carregando o glx Da _NVIDIA_! que caca....:-)
>> >vc tinha alguma placa nvidia instalada antes? mesmo que vc nao tenha,
>> >remova tudo  o que estiver relacionado com _nvidia_ :-) (de um belo:
>> >
>> >1) apt-get -f -u  remove --purge "pacotes nvidia"
>> >2) apt-get -f -u install --reinstall xserver-xfree86
>> >3) apt-get -f -u install libglu1-mesa libglu1-mesa-dev mesa-common-dev
>> >xlibmesa-dri xlibmesa-gl xlibmesa-gl-dev xlibmesa-glu xlibmesa-glu-dev
>> >obs) use "--purge"  no nvidia! ou o modulo da nvida nao sera
>> >removido....:-(     :-)
>> >obs) use tambem o xorg.conf que eu te mandei :-)
>> >obs) de esses 3 apt-get's um de cada vez e em sequencia  e  _sem_ dar
>> >reboot
>> >ate' o final do terceiro.
>> >obs) em (3) pode haver um problema com duplicidade Mas isso so'
>> >e'importante
>> >se o apt-get abortar o comando;
>> >se o apt-get nao abortar, aleluia! mande ele instalar:-) qualquer coisa
>> >entre em contato:_)
>> >4) reinicie o computador :-)
>> >5) provavelmente ja' deve funcionar:-)
>> >6) mande de novo pra mim os 4 anexos que vc me mano antes:-)
>> >7) funcionando me mande noticias:-)   se nao funcionar entre em
>>contato:-)
>> >para gente continuar
>> >obs) tudo ta carregando direito! a unica coisa agora e'  ele carregar o
>> >modulo libglx.a do xserver-xfree86:-) em vez lo libglx.so da nvidia( o
>>glx
>> >da nvidia _SO'_ fununcia:-) com placa nvidia....)EBA:-)
>> >
>> >espera
>> >
>> >
>> >Em 14/10/06, igor Scarinci Brandão < igorsb@hotmail.com> escreveu:
>> >>
>> >>Beleza... Mas o GLX falhou... Testei o xorg que me envio e estou te
>> >>enviando
>> >>o xorg.log
>> >>Abracao t+
>> >>Ass: ISB
>> >>I Look to the pool and i see de moon...
>> >>I Look to the moon, Where is the pool???
>> >>
>> >>
>> >>
>> >>
>> >> >From: Dani <daninorte@gmail.com>
>> >> >To: "igor Scarinci Brandão" < igorsb@hotmail.com>,Debian
>> >> ><debian-user-portuguese@lists.debian.org >
>> >> >Subject: Re: ATI X300 ???
>> >> >Date: Sat, 14 Oct 2006 13:07:10 -0300
>> >> >
>> >> >eu acredito que podemos estar perto de resolver:-)
>> >> >
>> >> >  Use o arquivo em anexo ( de uma olhada antes:-)  ah! o antigo
>> >> >configurador
>> >> >da ati funcionava  direito... esse
>> >> >aticonfig precisa de muito chao aiiinda....:-)
>> >> >esse e' o x.org que EU uso, claro que modificado deacordo com o
>> >> >xorg.confque vc me mandou:-)
>> >> >
>> >> >faca como root o seguinte:
>> >> >
>> >> >cd  /usr/X11/
>> >> >cp   -a   xorg.conf  xorg.conf.old
>> >> >cp  /dir/onde/voce/colocou/o_anexo/xorg.conf.daniel.amigo   xorg.conf
>> >> >
>> >> >reinicie a maquina :-)
>> >> >ainda tem algumas coisas pra consertar, mas talvez ja funcione. :-)
>> >> >funcionando me mande noticias:-)
>> >> >Se nao funcionar, tem outras coisas ainda faltando pra fazer e
>>tentar!
>> >> >vamos
>> >> >pra proxima etapa, mas
>> >> >antes disso teste o xorg.conf que eu te mandei :-}
>> >> >
>> >> >
>> >> >Em 14/10/06, igor Scarinci Brandão <igorsb@hotmail.com> escreveu:
>> >> >>
>> >> >>Amigo muito obrigado por essa atencao com essa placa... Eu realmente
>> >>estou
>> >> >>tomando uma surra deslavada... Como eu já lhe falei eu estou
>> >>desconfiando
>> >> >>se
>> >> >>ela tem suporte 3D. Ela é o On Board na placa D101GGc da intel. Voce
>> >> >>conhece
>> >> >>essa placa? Sera que ela tem suporte 3D?
>> >> >>Como voce me solicitou estou lhe enviando as respostas respectivas
>>para
>> >>as
>> >> >>perguntas... Mais uma vez muito obrigado : )
>> >> >>
>> >> >>1) Debian 3.1 sarge
>> >> >>2) i386,  driver é o 32 Bits
>> >> >>3) Olhei da maneira que me aconselhou, ele nao falha nenhum modulo
>> >> >>4) Instalei o Mesa e todas as dependecias
>> >> >>5) Sim na sessao modules tem a chamada para os modulos dri e glx
>> >> >>(Na sessao device tb esta carregando o driver fglrx de acordo como
>> >>manda
>> >>o
>> >> >>manual da ATI)
>> >> >>6) Sim o gcc é o mesmo
>> >> >>7) Eu levantei o modulo na mao como falou e vou te postar a saida do
>> >>meu
>> >> >>lsmod
>> >> >>Module                  Size  Used by
>> >> >>fglrx                 392684  0
>> >> >>bsd_comp                5760  0
>> >> >>ppp_synctty             8448  0
>> >> >>ppp_async               9600  1
>> >> >>crc_ccitt               2048  1 ppp_async
>> >> >>ppp_generic            26388  7 bsd_comp,ppp_synctty,ppp_async
>> >> >>slhc                    6272  1 ppp_generic
>> >> >>snd_pcm_oss            48672  0
>> >> >>snd_mixer_oss          17664  2 snd_pcm_oss
>> >> >>ipv6                  244064  14
>> >> >>joydev                  8384  0
>> >> >>ati_agp                 7052  0
>> >> >>ohci_hcd               34052  0
>> >> >>snd_ens1371            21600  1
>> >> >>gameport               12552  1 snd_ens1371
>> >> >>snd_rawmidi            20896  1 snd_ens1371
>> >> >>snd_seq_device          7180  1 snd_rawmidi
>> >> >>snd_ac97_codec         83580  1 snd_ens1371
>> >> >>snd_pcm                83204  3
>>snd_pcm_oss,snd_ens1371,snd_ac97_codec
>> >> >>snd_timer              21892  1 snd_pcm
>> >> >>snd                    47076  8
>> >> >>
>> >>
>> >>
>> >>snd_pcm_oss,snd_mixer_oss,snd_ens1371,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer
>> >> >>snd_page_alloc          8840  1 snd_pcm
>> >> >>ide_scsi               14980  0
>> >> >>agpgart                30288  2 fglrx,ati_agp
>> >> >>(Obs: Esse video é OnBoard... Mas veja que o modulo agpgart ta
>>usando
>>o
>> >> >>fglrx com ati_agp e nenhum despositvo esta usando o modulo fglrx,
>>será
>> >>que
>> >> >>é
>> >> >>isso??? Repare o "0" no modulo fglrx)
>> >> >>
>> >> >>8) Levantou o modulo, mas o modulo nao ve nenhum dispositivo.
>> >> >>
>> >> >>9) Como me pediu estou lhe enviando em anexo a saido do dmesg e
>> >> >>install.log
>> >> >>(Obs: No install.log encontrei algumas coisas interessantes, como
>>por
>> >> >>exemplo:
>> >> >>Icompatible pointer type. Se entendi bem o que isso quer dizer, ele
>>nao
>> >> >>esta
>> >> >>achando um modulo compativel com meu video OB)
>> >> >>10) O Xorg que estou lhe enviando foi o criado pelo comando
>>aticonfig
>> >> >>--initiall
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >>Ass: ISB
>> >> >>I Look to the pool and i see de moon...
>> >> >>I Look to the moon, Where is the pool???
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >> >From: Dani < daninorte@gmail.com>
>> >> >> >To: "igor Scarinci Brandão" < igorsb@hotmail.com>
>> >> >> >Subject: Re: ATI X300 ???
>> >> >> >Date: Fri, 13 Oct 2006 16:29:47 -0300
>> >> >> >
>> >> >> >oi! :-)
>> >> >> >algumas perguntas:-)
>> >> >> >
>> >> >> >1) qual e' a versao do debian que vc esta' usando?
>> >> >> >2) qual arquitetura debian? (ex.: i386 ou X86_64)?  ( eu quero
>>saber
>> >> >>sobre
>> >> >> >o
>> >> >> >'Sistema Operacional')
>> >> >> >2.1(obs) vc deve usar o driver ati 32 bits para a arquitetura
>>i386,
>>E
>> >> >>So'
>> >> >> >usar o driver ATI 64 bits SE Voce
>> >> >> >estiver usando o _Sistema Operacional de 64bits_
>> >> >> >3) vc fez mesmo o que eu pedi? ( eu pedi para vc olhar:-) -->
>> >> >> >
>> >> >> >    >verifique primeiro o log do X. eu estou usando "debian
>> >> >>etch/testing"
>> >> >> >e
>> >> >> >o
>> >> >> >    >X.org
>> >> >> >    ># less /var/log/Xorg.0.log <enter>
>> >> >> >    >use <pgdown> ou <pgup> para se locomover e q para sair da
>> >>listagem.
>> >> >> >    >procure por (EE)
>> >> >> >'..../dir/do/modulo/que/pifou/alguma_coisa_que_pifou.so....'
>> >> >> >3) o (EE) no log do X siginifica "erro" e e' nesse(s)
>>modulos.soque
>> >>vc
>> >> >> >deve
>> >> >> >usar
>> >> >> >o ldd
>> >> >> >4) vc instalou as libs-dev do "Mesa" e Cia?
>> >> >> >5) o arquivo de configuracao do X esta'/tem o comando para
>>carregar
>>o
>> >> >> >modulo
>> >> >> >glx? e o modulo dri?
>> >> >> >6) vc esta' usando o mesmo gcc que foi usado para compilar o
>>kernel?
>> >> >> >7) digite, como root, sem as aspas, em um terminal
>> >> >> >"modprobe fglrx"
>> >> >> >8) o que aconteceu em (7) ?
>> >> >> >9) mande anexado pra mim na sua proxima mensagem o conteudo:
>> >> >> >9.1) do commando "dmesg"
>> >> >> >9.2) o arquivo "/usr/share/fglrx/fglrx-install.log"
>> >> >> >9.3) se vc esta usando X.org, me mande anexado
>> >> >> >o arquivo "/var/log/Xorg.0.log" (ou o arquivo aquivalente
>> >> >> >se esta' usando o Xfree86)
>> >> >> >9.4) o arquivo  "/etc/X11/xorg.conf" (ou equivalente
>> >> >> >se vc estiver usano Xfree86) :-)
>> >> >> >
>> >> >> >[]´s Dani:-)
>> >> >> >
>> >> >> >
>> >> >> >Em 12/10/06, igor Scarinci Brandão < igorsb@hotmail.com> escreveu:
>> >> >> >>
>> >> >> >>
>> >> >> >>Veja Bem... ela levanta o X numa boa... ela só nao roda
>>aplicacoes
>> >> >>3d...
>> >> >> >>Quando tento executar o glxgears me retorna o seguinte:
>> >> >> >>
>> >> >> >>Xlib:  extension "GLX" missing on display ": 0.0".
>> >> >> >>glxgears: Error: couldn't get an RGB. Double-buffered visual.
>> >> >> >>
>> >> >> >>A saida do ldd é o seguinte
>> >> >> >>
>> >> >> >>linux-gate.so.1 =>  (0xffffe000)
>> >> >> >>         libm.so.6 => /lib/tls/libm.so.6 (0xb768c000)
>> >> >> >>         libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0xb75d2000)
>> >> >> >>         libpthread.so.0 => /lib/tls/libpthread.so.0 (0xb75c0000)
>> >> >> >>         librt.so.1 => /lib/tls/librt.so.1 (0xb75b8000)
>> >> >> >>         libGL.so.1 => /usr/X11R6/lib/libGL.so.1 (0xb7518000)
>> >> >> >>         libdl.so.2 => /lib/tls/libdl.so.2 (0xb7514000)
>> >> >> >>         libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0xb7449000)
>> >> >> >>         libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0xb743b000)
>> >> >> >>         libc.so.6 => /lib/tls/libc.so.6 (0xb731f000)
>> >> >> >>         /lib/ld-linux.so.2 (0x80000000)
>> >> >> >>         libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xb7316000)
>> >> >> >>
>> >> >> >>A placa mae é uma intel D101GGc com chipset ATI Radeon Xpress 200
>>e
>> >>o
>> >> >> >>video
>> >> >> >>On-Board em questao é o ATI X300
>> >> >> >>No site da intel se refere ao video como "Video Integrado
>>Flexivel"
>> >> >>será
>> >> >> >>que
>> >> >> >>é 3D tb???
>> >> >> >>Se nao for nao vou ter outra saida, se nao comprar uma placa PCI
>> >> >>Express.
>> >> >> >>O site da intel é com o modelo da placa é esse aqui
>> >> >> >> http://www.intel.com/products/motherboard/D101GGC/index.htm
>> >> >> >>
>> >> >> >>Muito obrigado
>> >> >> >>t+
>> >> >> >>
>> >> >> >>Ass: ISB
>> >> >> >>I Look to the pool and i see de moon...
>> >> >> >>I Look to the moon, Where is the pool???
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> >From: Dani < daninorte@gmail.com>
>> >> >> >> >To: "igor Scarinci Brandão" < igorsb@hotmail.com>
>> >> >> >> >Subject: Re: ATI X300 ???
>> >> >> >> >Date: Wed, 11 Oct 2006 19:34:00 -0300
>> >> >> >> >
>> >> >> >> >Ola'! espero que ja tenha resolvido. se nao resolveu faca como
>> >>root
>> >>o
>> >> >> >> >seguinte:
>> >> >> >> >
>> >> >> >> >verifique primeiro o log do X. eu estou usando "debian
>> >> >>etch/testing"  e
>> >> >> >>o
>> >> >> >> > X.org
>> >> >> >> ># less /var/log/Xorg.0.log <enter>
>> >> >> >> >use <pgdown> ou <pgup> para se locomover e q para sair da
>> >>listagem.
>> >> >> >> >procure por (EE)
>> >> >> >> >'..../dir/do/modulo/que/pifou/alguma_coisa_que_pifou.so....'
>> >> >> >> >obs: geralmente quando (no meu caso....) nao carregava era por
>> >>falta
>> >> >>de
>> >> >> >> >algumas
>> >> >> >> >libs. vamos descobrir quais? (NAO  Esqueca do "L"  do ldd! ou
>>vc
>> >>vai
>> >> >> >>fazer
>> >> >> >> >uma desgraca.....:-))
>> >> >> >> >
>> >> >> >> >ex.:
>> >> >> >> >linux:/# ldd /usr/lib/xorg/modules/drivers/fglrx_drv.so
>> >> >> >> >        linux-gate.so.1 =>  (0xffffe000)
>> >> >> >> >        libpthread.so.0 => /lib/tls/libpthread.so.0
>>(0xa773f000)
>> >> >> >> >        libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0xa7685000)
>> >> >> >> >        libm.so.6 => /lib/tls/libm.so.6 (0xa7660000)
>> >> >> >> >        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xa7655000)
>> >> >> >> >        libc.so.6 => /lib/tls/libc.so.6 (0xa7523000)
>> >> >> >> >        /lib/ld-linux.so.2 (0x75555000)
>> >> >> >> >e procure  no lado direito se falta alguma biblioteca; no meu
>>caso
>> >> >> >> >"faltava"
>> >> >> >> >a libstdc++.so.5 ; verifique no log acima quais estao com
>> >>problemas
>> >>e
>> >> >> >>com
>> >> >> >> >o comando ldd verifique se nao esta' faltando alguma
>>bilibioteca
>>e
>> >> >>e'
>> >> >> >> >claro
>> >> >> >> >instale as libs que faltam.
>> >> >> >> >ex:
>> >> >> >> >apt-cache search libstdc++
>> >> >> >> >....
>> >> >> >> >apt-get -f -u install libstdc++5 <enter>
>> >> >> >> >
>> >> >> >> >MAS isso era no meu caso:-) verifque qual e' o Seu.:-)
>> >> >> >> >
>> >> >> >> >[]'s Dani :-)
>> >> >> >> >
>> >> >> >> >p.s.: como vc informou, estou partindo do presuposto que a
>> >>compilacao
>> >> >> >>foi
>> >> >> >> >bem sucedida.:-)
>> >> >> >> >
>> >> >> >> >Em 07/10/06, igor Scarinci Brandão < igorsb@hotmail.com>
>>escreveu:
>> >> >> >> >>
>> >> >> >> >>Olá pessoal... Eu comprei um Pentium 4 com a placa mae da
>>intel
>> >> >>D10Ggc
>> >> >> >> >>estou rodando o kernel 2.6.13.2.
>> >> >> >> >>Já configurei o som o DMA para a placa ja recompilei o kernel
>>de
>> >> >>acordo
>> >> >> >> >>com
>> >> >> >> >>hardware que tenho em maos, e ta tudo "beleza" só ta faltando
>> >> >>instalar
>> >> >> >>o
>> >> >> >> >>video onboard dela. Na caixa fala que é uma ATI Radeon Xpress
>>200
>> >> >>mas
>> >> >>o
>> >> >> >> >>video OB é ATI X300.
>> >> >> >> >>Alguem já instalou essa video??? Já baixei aquele driver de
>>35MB
>> >>da
>> >> >>ati
>> >> >> >> >>instalaei mas 3d nao funciona... Da o seguinte erro quando
>>coloco
>> >> >> >>glxinfo
>> >> >> >> >>
>> >> >> >> >>name of display: :0.0
>> >> >> >> >>Xlib:  extension "GLX" missing on display ": 0.0".
>> >> >> >> >>Xlib:  extension "GLX" missing on display ":0.0".
>> >> >> >> >>Xlib:  extension "GLX" missing on display ": 0.0".
>> >> >> >> >>Error: couldn't find RGB GLX visual
>> >> >> >> >>
>> >> >> >> >>    visual  x  bf lv rg d st colorbuffer ax dp st
>> >> >>accumbuffer  ms  cav
>> >> >> >> >>id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns
>>b
>> >>eat
>> >> >> >>
>> >> >>
>> >>
>> >>----------------------------------------------------------------------
>> >> >> >> >>Xlib:  extension "GLX" missing on display ":0.0".
>> >> >> >> >>Xlib:  extension "GLX" missing on display ": 0.0".
>> >> >> >> >>0x21 24 tc  1  0  0 c  .  .  0  0  0  0  0  0  0  0  0  0  0
>>0
>>0
>> >> >>None
>> >> >> >> >>Xlib:  extension "GLX" missing on display ":0.0".
>> >> >> >> >>Xlib:  extension "GLX" missing on display ":0.0".
>> >> >> >> >>0x22 24 dc  1  0  0 c  .  .  0  0  0  0  0  0  0  0  0  0
>> >> >> >> >>
>> >> >> >> >>A saida do meu lscpi é essa:
>> >> >> >> >>
>> >> >> >> >>00: 00.0 Host bridge: ATI Technologies Inc: Unknown device 5a33
>> >>(rev
>> >> >>01)
>> >> >> >> >>00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f
>> >> >> >> >>00:11.0 IDE interface: ATI Technologies Inc ATI 437A Serial
>>ATA
>> >> >> >>Controller
>> >> >> >> >>(rev 80)
>> >> >> >> >>00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial
>>ATA
>> >> >> >>Controller
>> >> >> >> >>(rev 80)
>> >> >> >> >>00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB
>>Host
>> >> >> >>Controller
>> >> >> >> >>(rev 80)
>> >> >> >> >>00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB
>>Host
>> >> >> >>Controller
>> >> >> >> >>(rev 80)
>> >> >> >> >>00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2
>>Host
>> >> >> >> >>Controller
>> >> >> >> >>(rev 80)
>> >> >> >> >>00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller
>> >>(rev
>> >> >>82)
>> >> >> >> >>00:14.1 IDE interface: ATI Technologies Inc Standard Dual
>>Channel
>> >> >>PCI
>> >> >> >>IDE
>> >> >> >> >>Controller ATI (rev 80)
>> >> >> >> >>00: 14.2 Class 0403: ATI Technologies Inc: Unknown device 437b
>> >>(rev
>> >> >>01)
>> >> >> >> >>00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA
>>Bridge
>> >> >>(rev
>> >> >> >>80)
>> >> >> >> >>00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI
>>Bridge
>> >> >>(rev
>> >> >> >>80)
>> >> >> >> >>01:05.0 VGA compatible controller: ATI Technologies Inc:
>>Unknown
>> >> >>device
>> >> >> >> >>5a61
>> >> >> >> >>02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
>> >> >> >> >>RTL-8139/8139C/8139C+ (rev 10)
>> >> >> >> >>
>> >> >> >> >>Agradeco desde ja'muito obrigado
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>Ass: ISB
>> >> >> >> >>I Look to the pool and i see de moon...
>> >> >> >> >>I Look to the moon, Where is the pool???
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>--
>> >> >> >> >>To UNSUBSCRIBE, email to
>> >> >> >>debian-user-portuguese-REQUEST@lists.debian.org
>> >> >> >> >>with a subject of "unsubscribe". Trouble? Contact
>> >> >> >> >>listmaster@lists.debian.org
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >--
>> >> >> >> >"There are many plans in the Human heart, But
>> >> >> >> >is the Lord's Purpose that prevails"
>> >> >> >> >
>> >> >> >> >[]'s Dani :-)
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >
>> >> >> >
>> >> >> >--
>> >> >> >"There are many plans in the Human heart, But
>> >> >> >is the Lord's Purpose that prevails"
>> >> >> >
>> >> >> >[]'s Dani :-)
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >> >--
>> >> >"There are many plans in the Human heart, But
>> >> >is the Lord's Purpose that prevails"
>> >> >
>> >> >[]'s Dani :-)
>> >>
>> >>
>> >> ><< xorg.conf.daniel.amigo >>
>> >>
>> >>
>> >>
>> >>
>> >
>> >
>> >--
>> >"There are many plans in the Human heart, But
>> >is the Lord's Purpose that prevails"
>> >
>> >[]'s Dani :-)
>>
>>
>>
>
>
>--
>"There are many plans in the Human heart, But
>is the Lord's Purpose that prevails"
>
>[]'s Dani :-)