lm-sensors nao funcionam de qq maneira
Boas.
Tenho um Linux Backups 2.6.17.13 #1 Fri Sep 15 15:52:12 WEST 2006 i686
GNU/Linux
actualizei o kernel quase so pra ver se conseguia meter os sensores a
funcionarem mas nao tive sucesso.
corro o sensors-detect de varias maneiras e nao ha forma de dar, diz
sempre no sensors found!
a motherboard que possuo é a asrock p4vt8+
no sensors-detect, se meter tudo a yes, ele detecta-me isto:
Driver `eeprom' (should be inserted):
Detects correctly:
* Bus `SMBus Via Pro adapter at 0400'
Busdriver `i2c-viapro', I2C address 0x50
Chip `SPD EEPROM' (confidence: 8)
Driver `w83781d' (should be inserted):
Detects correctly:
* ISA bus address 0x0290 (Busdriver `i2c-isa')
Chip `Winbond W83697HF' (confidence: 8)
Driver `w83627hf' (should be inserted):
Detects correctly:
* ISA bus address 0x0295 (Busdriver `i2c-isa')
Chip `Winbond W83697HF Super IO Sensors' (confidence: 9)
e depois, dá isto pra meter no modules:
# I2C adapter drivers
i2c-viapro
i2c-isa
# I2C chip drivers
# Warning: the required module eeprom is not currently installed on your
system.
# For status of 2.6 kernel ports see
http://secure.netroedge.com/~lm78/supported.html
# If driver is built-in to the kernel, or unavailable, comment out the
following line.
eeprom
w83781d
# Warning: the required module w83627hf is not currently installed on
your system.
# For status of 2.6 kernel ports see
http://secure.netroedge.com/~lm78/supported.html
# If driver is built-in to the kernel, or unavailable, comment out the
following line.
w83627hf
ate rebootei a maquina, e:
Backups:~# sensors
No sensors found!
Obrigado desde já pela ajuda.
Reply to: