Re: Montando pendrive

[Bruno Buys <brunobuys@gmail.com>]

Qual partição ele tá tentando montar? O meu pendrive,por exemplo, nao 
tem sdb1, é só sdb mesmo.
Tente fazer:

mount /dev/sdb /media/algum-dir

e

mount /dev/sdb1 /media/algum-dir




Sergio Berlotto wrote:

> Quando insiro meu pendrive o mesmo nao é montado corretamente.
> Ai verificando no dmesg recebi a msg:
>
> scsi2 : SCSI emulation for USB Mass Storage devices
>   Vendor: Kingston  Model: DataTraveler 2.0  Rev: 1.00
>   Type:   Direct-Access                      ANSI SCSI revision: 02
> SCSI device sdb: 492544 512-byte hdwr sectors (252 MB)
> sdb: assuming Write Enabled
> sdb: assuming drive cache: write through
>  /dev/scsi/host2/bus0/target0/lun0: [CUMANA/ADFS] p1<5>Attached scsi 
> removable disk sdb at scsi2, channel 0, id 0, lun 0
> Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0,  type 0
> USB Mass Storage device found at 4
> Buffer I/O error on device sdb1, logical block 508378384
> Buffer I/O error on device sdb1, logical block 508378385
> Buffer I/O error on device sdb1, logical block 508378386
> Buffer I/O error on device sdb1, logical block 508378387
>
> Como posso arrumar isto ?
> Meu kernel é: 2.6.8-2-386
> Um Debian Sarge.
>
> --
> Att,
> Sérgio Hilton Berlotto Junior
> ============================
> e-mail: sergio.berlotto em gmail.com <http://gmail.com>
> msn:    berlottocdd em hotmail.com <http://hotmail.com>
> http://www.berlotto.com.br
> ============================