RES: erro ao compilar regras do CBQ

["Rodrigo Fortes" <rodrigo@tubosapolo.com.br>]

            Prezados colegas?
Coloquei instalei o cbq ?. compilei o kernel corretamente, os módulos estão
carregados (
cls_route               4280   0  (unused)
cls_u32                 4892   0  (unused)
cls_fw                  2584   0  (unused)
sch_prio                2880   0  (unused)
sch_sfq                 3424   0  (unused)
sch_tbf                 3072   0  (unused)
sch_cbq                12544   0
ipt_unclean             6936   1
ipt_owner               1304   0  (unused)
ipt_TCPMSS              2328   0  (unused)
ipt_MIRROR              1208   0  (unused)
ipt_LOG                 3384   0  (unused)
ip_queue                5452   0
)
Porém quando tento /etc/rc.d/cbq compile aparece o seguinte erro:

root@deepblue:~# /etc/rc.d/cbq compile
/sbin/tc qdisc del dev eth1 root
/sbin/tc qdisc add dev eth1 root handle 1 cbq bandwidth 100Mbit avpkt 1000
cell 8
/sbin/tc class change dev eth1 root cbq weight 10Mbit allot 1514

**CBQ: class ID of cbq-rio must be in range <0002-FFFF>!
/sbin/tc qdisc del dev lo root
/sbin/tc qdisc del dev tunl0 root
/sbin/tc qdisc del dev gre0 root
/sbin/tc qdisc del dev eth0 root
/sbin/tc qdisc del dev eth1 root
root@deepblue:~#

Sendo que minha regra é a seguinte:
root@deepblue:~# cat /etc/sysconfig/cbq/cbq-rio
DEVICE=eth1,100Mbit,10Mbit
RATE=32Kbit
WEIGHT=3Kbit
PRIO=5
RULE=172.16.24.0/24
BOUNDED=yes
ISOLATED=yes
root@deepblue:~#

o que pode estar acontecendo?


Grato

Rodrigo Fortes