erro ao compilar regras do CBQ

Prezados colegas…

Coloquei instalei o cbq …. compilei o kernel corretamente, os módulos estão carregados (

cls_route 4280 0 (unused)

cls_u32 4892 0 (unused)

cls_fw 2584 0 (unused)

sch_prio 2880 0 (unused)

sch_sfq 3424 0 (unused)

sch_tbf 3072 0 (unused)

sch_cbq 12544 0

ipt_unclean 6936 1

ipt_owner 1304 0 (unused)

ipt_TCPMSS 2328 0 (unused)

ipt_MIRROR 1208 0 (unused)

ipt_LOG 3384 0 (unused)

ip_queue 5452 0

)

Porém quando tento /etc/rc.d/cbq compile aparece o seguinte erro:

root@deepblue:~# /etc/rc.d/cbq compile

/sbin/tc qdisc del dev eth1 root

/sbin/tc qdisc add dev eth1 root handle 1 cbq bandwidth 100Mbit avpkt 1000 cell 8

/sbin/tc class change dev eth1 root cbq weight 10Mbit allot 1514

**CBQ: class ID of cbq-rio must be in range <0002-FFFF>!

/sbin/tc qdisc del dev lo root

/sbin/tc qdisc del dev tunl0 root

/sbin/tc qdisc del dev gre0 root

/sbin/tc qdisc del dev eth0 root

/sbin/tc qdisc del dev eth1 root

root@deepblue:~#

Sendo que minha regra é a seguinte:

root@deepblue:~# cat /etc/sysconfig/cbq/cbq-rio

DEVICE=eth1,100Mbit,10Mbit

RATE=32Kbit

WEIGHT=3Kbit

PRIO=5

RULE=172.16.24.0/24

BOUNDED=yes

ISOLATED=yes

root@deepblue:~#

o que pode estar acontecendo?

Grato

Rodrigo Fortes