[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

HELP! Problema ao configurar rede local



Olá pessoal!

Instalei o Debian 3 e estou tendo dificuldades p/fazer funcionar
corretamente a placa de rede.
A placa é uma NE2000, instalei-a através do modconf, escolhendo o módulo ne,
colocando o parâmetro io=0x300, e o IRQ foi reconhecido automaticamente como
10 (no Windows também tinha estes valores). Até aí ok, mas não sei como
configurar o restante.

Eu usava o Conectiva e estava acostumado a usar o Linuxconf, através do qual
se configurava diversas opções de rede, ao menos sempre consegui fazer
funcionar, agora gostaria de saber quais os arquivos que devo editar para
fazer as configurações necessárias e o que devo colocar em cada um deles.
Será que alguém teria um bom tutorial que ensina a configurar isto?
Configurei somente o /etc/hosts com os equipamentos da minha rede. Ao dar um
ping no endereço da máquina local (192.168.0.16) é retornado o erro 'Network
is unreachable', o que significa isto?

Também percebi algumas mensagens de erro na inicialização do sistema, não
sei o que pode estar errado, seguem abaixo o conteúdo dos arquivos
/var/log/syslog e /var/log/kern.log.

Tenho certa urgência para configurar este equipamento e ficaria grato pela
ajuda de vocês.

Obrigado,
Silas
info.unigal@mailbr.com.br

----- /var/log/syslog -----
Oct  3 09:30:06 aganet2 syslogd 1.4.1#10: restart.
Oct  3 09:30:07 aganet2 kernel: klogd 1.4.1#10, log source = /proc/kmsg
started.
Oct  3 09:30:07 aganet2 kernel: Inspecting /boot/System.map-2.2.20
Oct  3 09:30:07 aganet2 rpc.statd[157]: Version 1.0 Starting
Oct  3 09:30:10 aganet2 kernel: Loaded 9818 symbols from
/boot/System.map-2.2.20.
Oct  3 09:30:10 aganet2 kernel: Symbols match kernel version 2.2.20.
Oct  3 09:30:10 aganet2 kernel: Loaded 143 symbols from 6 modules.
Oct  3 09:30:10 aganet2 kernel: Linux version 2.2.20 (herbert@gondolin) (gcc
version 2.7.2.3) #1 Sat Apr 20 11:45:28 EST 2002
Oct  3 09:30:10 aganet2 kernel: BIOS-provided physical RAM map:
Oct  3 09:30:10 aganet2 kernel:  BIOS-e801: 0009f000 @ 00000000 (usable)
Oct  3 09:30:10 aganet2 kernel:  BIOS-e801: 00f00000 @ 00100000 (usable)
Oct  3 09:30:10 aganet2 kernel: Console: colour VGA+ 80x25
Oct  3 09:30:10 aganet2 kernel: Calibrating delay loop... 49.86 BogoMIPS
Oct  3 09:30:10 aganet2 kernel: Memory: 13520k/16384k available (1756k
kernel code, 412k reserved, 544k data, 152k init)
Oct  3 09:30:10 aganet2 kernel: Checking if this processor honours the WP
bit even in supervisor mode... Ok.
Oct  3 09:30:10 aganet2 kernel: Dentry hash table entries: 2048 (order 2,
16k)
Oct  3 09:30:10 aganet2 kernel: Buffer cache hash table entries: 16384
(order 4, 64k)
Oct  3 09:30:10 aganet2 kernel: Page cache hash table entries: 4096 (order
2, 16k)
Oct  3 09:30:10 aganet2 kernel: VFS: Diskquotas version dquot_6.4.0
initialized
Oct  3 09:30:10 aganet2 kernel: CPU: 486
Oct  3 09:30:11 aganet2 kernel: Checking 386/387 coupling... OK, FPU using
exception 16 error reporting.
Oct  3 09:30:11 aganet2 kernel: Checking 'hlt' instruction... OK.
Oct  3 09:30:11 aganet2 kernel: Checking for popad bug... OK.
Oct  3 09:30:11 aganet2 kernel: POSIX conformance testing by UNIFIX
Oct  3 09:30:11 aganet2 kernel: PCI: PCI BIOS revision 2.00 entry at 0xfdb58
Oct  3 09:30:11 aganet2 kernel: PCI: Using configuration type 1
Oct  3 09:30:11 aganet2 kernel: PCI: Probing PCI hardware
Oct  3 09:30:11 aganet2 kernel: Linux NET4.0 for Linux 2.2
Oct  3 09:30:11 aganet2 kernel: Based upon Swansea University Computer
Society NET3.039
Oct  3 09:30:11 aganet2 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct  3 09:30:11 aganet2 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct  3 09:30:11 aganet2 kernel: TCP: Hash tables configured (ehash 16384
bhash 16384)
Oct  3 09:30:11 aganet2 kernel: Starting kswapd v 1.5
Oct  3 09:30:11 aganet2 kernel: Detected PS/2 Mouse Port.
Oct  3 09:30:11 aganet2 kernel: Serial driver version 4.27 with HUB-6
MANY_PORTS MULTIPORT SHARE_IRQ enabled
Oct  3 09:30:11 aganet2 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Oct  3 09:30:11 aganet2 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Oct  3 09:30:11 aganet2 kernel: ttyS02 at 0x03e8 (irq = 4) is a 16550A
Oct  3 09:30:11 aganet2 kernel: pty: 256 Unix98 ptys configured
Oct  3 09:30:11 aganet2 kernel: Real Time Clock Driver v1.09
Oct  3 09:30:11 aganet2 kernel: RAM disk driver initialized:  16 RAM disks
of 4096K size
Oct  3 09:30:11 aganet2 kernel: loop: registered device at major 7
Oct  3 09:30:11 aganet2 kernel: CMD640: ignored by ide_scan_pci_device()
(uses own driver)
Oct  3 09:30:11 aganet2 kernel: ide0: buggy cmd640b interface on PCI
(type1), config=0x5e
Oct  3 09:30:11 aganet2 kernel: ide1: serialized, secondary interface okay
Oct  3 09:30:11 aganet2 kernel: cmd640: drive0 timings/prefetch(on)
preserved
Oct  3 09:30:11 aganet2 kernel: cmd640: drive1 timings/prefetch(on)
preserved
Oct  3 09:30:11 aganet2 kernel: cmd640: drive2 timings/prefetch(on)
preserved
Oct  3 09:30:11 aganet2 kernel: cmd640: drive3 timings/prefetch(on)
preserved
Oct  3 09:30:11 aganet2 kernel: hda: Conner Peripherals 1080MB - CFS1081A,
ATA DISK drive
Oct  3 09:30:11 aganet2 kernel: hdd: LTN525, ATAPI CDROM drive
Oct  3 09:30:11 aganet2 kernel: ide2: ports already in use, skipping probe
Oct  3 09:30:11 aganet2 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct  3 09:30:11 aganet2 kernel: ide1 at 0x170-0x177,0x376 on irq 15
(serialized with ide0)
Oct  3 09:30:11 aganet2 kernel: hda: Conner Peripherals 1080MB - CFS1081A,
1032MB w/0kB Cache, CHS=524/64/63
Oct  3 09:30:11 aganet2 kernel: hdd: ATAPI 52X CD-ROM drive, 120kB Cache
Oct  3 09:30:11 aganet2 kernel: Uniform CD-ROM driver Revision: 3.11
Oct  3 09:30:11 aganet2 kernel: Floppy drive(s): fd0 is 1.44M
Oct  3 09:30:11 aganet2 kernel: FDC 0 is a post-1991 82077
Oct  3 09:30:11 aganet2 kernel: md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
Oct  3 09:30:11 aganet2 kernel: scsi: <fdomain> Detection failed (no card)
Oct  3 09:30:11 aganet2 kernel: NCR53c406a: no available ports found
Oct  3 09:30:11 aganet2 kernel: sym53c416.c: Version 1.0.0
Oct  3 09:30:11 aganet2 kernel: Failed initialization of WD-7000 SCSI card!
Oct  3 09:30:11 aganet2 kernel: IBM MCA SCSI: Version 3.2
Oct  3 09:30:11 aganet2 kernel: IBM MCA SCSI: No Microchannel-bus
present --> Aborting.
Oct  3 09:30:11 aganet2 kernel:               This machine does not have any
IBM MCA-bus
Oct  3 09:30:11 aganet2 kernel:               or the MCA-Kernel-support is
not enabled!
Oct  3 09:30:11 aganet2 kernel: megaraid: v1.11 (Aug 23, 2000)
Oct  3 09:30:11 aganet2 kernel: aec671x_detect:
Oct  3 09:30:11 aganet2 kernel: 3ware Storage Controller device driver for
Linux v1.02.00.008.
Oct  3 09:30:11 aganet2 kernel: 3w-xxxx: tw_findcards(): No cards found.
Oct  3 09:30:11 aganet2 kernel: scsi : 0 hosts.
Oct  3 09:30:11 aganet2 kernel: scsi : detected total.
Oct  3 09:30:11 aganet2 kernel: Partition check:
Oct  3 09:30:11 aganet2 kernel:  hda: hda1 hda2 < hda5 >
Oct  3 09:30:11 aganet2 kernel: apm: BIOS version 1.0 Flags 0x0b (Driver
version 1.13)
Oct  3 09:30:11 aganet2 kernel: apm: disabled on user request.
Oct  3 09:30:11 aganet2 kernel: VFS: Mounted root (ext2 filesystem)
readonly.
Oct  3 09:30:11 aganet2 kernel: Freeing unused kernel memory: 152k freed
Oct  3 09:30:11 aganet2 kernel: NET4: Unix domain sockets 1.0 for Linux
NET4.0.
Oct  3 09:30:11 aganet2 kernel: Adding Swap: 66492k swap-space (priority -1)
Oct  3 09:30:11 aganet2 kernel: ne.c:v1.10 9/23/94 Donald Becker
(becker@cesdis.gsfc.nasa.gov)
Oct  3 09:30:11 aganet2 kernel: NE*000 ethercard probe at 0x300: 00 40 33 e0
2d 0f
Oct  3 09:30:11 aganet2 kernel: eth0: NE2000 found at 0x300, using IRQ 10.
Oct  3 09:30:24 aganet2 lpd[180]: restarted
Oct  3 09:30:32 aganet2 xfs: ignoring font path element
/usr/lib/X11/fonts/cyrillic/ (unreadable)
Oct  3 09:30:34 aganet2 xfs: ignoring font path element
/usr/lib/X11/fonts/CID (unreadable)
Oct  3 09:30:35 aganet2 squid[202]: Squid Parent: child process 205 started
Oct  3 09:30:35 aganet2 squid[205]: Starting Squid Cache version 2.4.STABLE6
for i386-debian-linux-gnu...
Oct  3 09:30:35 aganet2 squid[205]: Process ID 205
Oct  3 09:30:35 aganet2 squid[205]: With 1024 file descriptors available
Oct  3 09:30:35 aganet2 squid[205]: DNS Socket created on FD 5
Oct  3 09:30:35 aganet2 squid[205]: Adding nameserver 200.248.11.130 from
/etc/resolv.conf
Oct  3 09:30:35 aganet2 squid[205]: User-Agent logging is disabled.
Oct  3 09:30:35 aganet2 squid[205]: Referer logging is disabled.
Oct  3 09:30:38 aganet2 anacron[209]: Anacron 2.3 started on 2002-10-03
Oct  3 09:30:38 aganet2 squid[205]: Unlinkd pipe opened on FD 10
Oct  3 09:30:38 aganet2 anacron[209]: Normal exit (0 jobs run)
Oct  3 09:30:38 aganet2 squid[205]: Swap maxSize 102400 KB, estimated 7876
objects
Oct  3 09:30:38 aganet2 squid[205]: Target number of buckets: 393
Oct  3 09:30:38 aganet2 squid[205]: Using 8192 Store buckets
Oct  3 09:30:38 aganet2 squid[205]: Max Mem  size: 8192 KB
Oct  3 09:30:38 aganet2 squid[205]: Max Swap size: 102400 KB
Oct  3 09:30:38 aganet2 squid[205]: Local cache digest enabled;
rebuild/rewrite every 3600/3600 sec
Oct  3 09:30:39 aganet2 /usr/sbin/cron[214]: (CRON) INFO (pidfile fd = 3)
Oct  3 09:30:39 aganet2 /usr/sbin/cron[215]: (CRON) STARTUP (fork ok)
Oct  3 09:30:39 aganet2 squid[205]: Rebuilding storage in /var/spool/squid
(CLEAN)
Oct  3 09:30:39 aganet2 squid[205]: Using Least Load store dir selection
Oct  3 09:30:39 aganet2 squid[205]: Set Current Directory to
/var/spool/squid
Oct  3 09:30:40 aganet2 /usr/sbin/cron[215]: (CRON) INFO (Running @reboot
jobs)
Oct  3 09:30:43 aganet2 squid[205]: Loaded Icons.
Oct  3 09:30:44 aganet2 squid[205]: Accepting HTTP connections at 0.0.0.0,
port 3128, FD 11.
Oct  3 09:30:44 aganet2 squid[205]: Accepting ICP messages at 0.0.0.0, port
3130, FD 12.
Oct  3 09:30:44 aganet2 squid[205]: HTCP Disabled.
Oct  3 09:30:44 aganet2 squid[205]: WCCP Disabled.
Oct  3 09:30:45 aganet2 squid[205]: Ready to serve requests.
Oct  3 09:31:55 aganet2 modprobe: modprobe: Can't locate module
char-major-13
Oct  3 09:34:03 aganet2 kernel: VFS: Disk change detected on device fd(2,0)
Oct  3 09:34:10 aganet2 squid[205]: Done scanning /var/spool/squid swaplog
(0 entries)
Oct  3 09:34:11 aganet2 squid[205]: Finished rebuilding storage from disk.
Oct  3 09:34:11 aganet2 squid[205]:         2 Entries scanned
Oct  3 09:34:11 aganet2 squid[205]:         0 Invalid entries.
Oct  3 09:34:11 aganet2 squid[205]:         0 With invalid flags.
Oct  3 09:34:11 aganet2 squid[205]:         2 Objects loaded.
Oct  3 09:34:11 aganet2 squid[205]:         0 Objects expired.
Oct  3 09:34:11 aganet2 squid[205]:         0 Objects cancelled.
Oct  3 09:34:11 aganet2 squid[205]:         0 Duplicate URLs purged.
Oct  3 09:34:11 aganet2 squid[205]:         0 Swapfile clashes avoided.
Oct  3 09:34:11 aganet2 squid[205]:   Took 214.1 seconds (   0.0
objects/sec).
Oct  3 09:34:11 aganet2 squid[205]: Beginning Validation Procedure
Oct  3 09:34:11 aganet2 squid[205]:   Completed Validation Procedure
Oct  3 09:34:11 aganet2 squid[205]:   Validated 2 Entries
Oct  3 09:34:11 aganet2 squid[205]:   store_swap_size = 92k
Oct  3 09:34:12 aganet2 squid[205]: storeLateRelease: released 0 objects
Oct  3 09:37:04 aganet2 kernel: VFS: Disk change detected on device fd(2,0)
Oct  3 09:38:02 aganet2 /USR/SBIN/CRON[281]: (mail) CMD (  if [ -x
/usr/sbin/exim -a -f /etc/exim/exim.conf ]; then /usr/sbin/exim -q ; fi)
Oct  3 09:39:37 aganet2 kernel: VFS: Disk change detected on device
ide1(22,64)
Oct  3 09:39:40 aganet2 last message repeated 3 times
Oct  3 09:39:51 aganet2 kernel: cdrom: open failed.
Oct  3 09:39:51 aganet2 kernel: VFS: Disk change detected on device
ide1(22,64)
----------

----- /var/log/kern.log -----
Oct  3 09:30:07 aganet2 kernel: klogd 1.4.1#10, log source = /proc/kmsg
started.
Oct  3 09:30:07 aganet2 kernel: Inspecting /boot/System.map-2.2.20
Oct  3 09:30:10 aganet2 kernel: Loaded 9818 symbols from
/boot/System.map-2.2.20.
Oct  3 09:30:10 aganet2 kernel: Symbols match kernel version 2.2.20.
Oct  3 09:30:10 aganet2 kernel: Loaded 143 symbols from 6 modules.
Oct  3 09:30:10 aganet2 kernel: Linux version 2.2.20 (herbert@gondolin) (gcc
version 2.7.2.3) #1 Sat Apr 20 11:45:28 EST 2002
Oct  3 09:30:10 aganet2 kernel: BIOS-provided physical RAM map:
Oct  3 09:30:10 aganet2 kernel:  BIOS-e801: 0009f000 @ 00000000 (usable)
Oct  3 09:30:10 aganet2 kernel:  BIOS-e801: 00f00000 @ 00100000 (usable)
Oct  3 09:30:10 aganet2 kernel: Console: colour VGA+ 80x25
Oct  3 09:30:10 aganet2 kernel: Calibrating delay loop... 49.86 BogoMIPS
Oct  3 09:30:10 aganet2 kernel: Memory: 13520k/16384k available (1756k
kernel code, 412k reserved, 544k data, 152k init)
Oct  3 09:30:10 aganet2 kernel: Checking if this processor honours the WP
bit even in supervisor mode... Ok.
Oct  3 09:30:10 aganet2 kernel: Dentry hash table entries: 2048 (order 2,
16k)
Oct  3 09:30:10 aganet2 kernel: Buffer cache hash table entries: 16384
(order 4, 64k)
Oct  3 09:30:10 aganet2 kernel: Page cache hash table entries: 4096 (order
2, 16k)
Oct  3 09:30:10 aganet2 kernel: VFS: Diskquotas version dquot_6.4.0
initialized
Oct  3 09:30:10 aganet2 kernel: CPU: 486
Oct  3 09:30:11 aganet2 kernel: Checking 386/387 coupling... OK, FPU using
exception 16 error reporting.
Oct  3 09:30:11 aganet2 kernel: Checking 'hlt' instruction... OK.
Oct  3 09:30:11 aganet2 kernel: Checking for popad bug... OK.
Oct  3 09:30:11 aganet2 kernel: POSIX conformance testing by UNIFIX
Oct  3 09:30:11 aganet2 kernel: PCI: PCI BIOS revision 2.00 entry at 0xfdb58
Oct  3 09:30:11 aganet2 kernel: PCI: Using configuration type 1
Oct  3 09:30:11 aganet2 kernel: PCI: Probing PCI hardware
Oct  3 09:30:11 aganet2 kernel: Linux NET4.0 for Linux 2.2
Oct  3 09:30:11 aganet2 kernel: Based upon Swansea University Computer
Society NET3.039
Oct  3 09:30:11 aganet2 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct  3 09:30:11 aganet2 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct  3 09:30:11 aganet2 kernel: TCP: Hash tables configured (ehash 16384
bhash 16384)
Oct  3 09:30:11 aganet2 kernel: Starting kswapd v 1.5
Oct  3 09:30:11 aganet2 kernel: Detected PS/2 Mouse Port.
Oct  3 09:30:11 aganet2 kernel: Serial driver version 4.27 with HUB-6
MANY_PORTS MULTIPORT SHARE_IRQ enabled
Oct  3 09:30:11 aganet2 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Oct  3 09:30:11 aganet2 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Oct  3 09:30:11 aganet2 kernel: ttyS02 at 0x03e8 (irq = 4) is a 16550A
Oct  3 09:30:11 aganet2 kernel: pty: 256 Unix98 ptys configured
Oct  3 09:30:11 aganet2 kernel: Real Time Clock Driver v1.09
Oct  3 09:30:11 aganet2 kernel: RAM disk driver initialized:  16 RAM disks
of 4096K size
Oct  3 09:30:11 aganet2 kernel: loop: registered device at major 7
Oct  3 09:30:11 aganet2 kernel: CMD640: ignored by ide_scan_pci_device()
(uses own driver)
Oct  3 09:30:11 aganet2 kernel: ide0: buggy cmd640b interface on PCI
(type1), config=0x5e
Oct  3 09:30:11 aganet2 kernel: ide1: serialized, secondary interface okay
Oct  3 09:30:11 aganet2 kernel: cmd640: drive0 timings/prefetch(on)
preserved
Oct  3 09:30:11 aganet2 kernel: cmd640: drive1 timings/prefetch(on)
preserved
Oct  3 09:30:11 aganet2 kernel: cmd640: drive2 timings/prefetch(on)
preserved
Oct  3 09:30:11 aganet2 kernel: cmd640: drive3 timings/prefetch(on)
preserved
Oct  3 09:30:11 aganet2 kernel: hda: Conner Peripherals 1080MB - CFS1081A,
ATA DISK drive
Oct  3 09:30:11 aganet2 kernel: hdd: LTN525, ATAPI CDROM drive
Oct  3 09:30:11 aganet2 kernel: ide2: ports already in use, skipping probe
Oct  3 09:30:11 aganet2 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct  3 09:30:11 aganet2 kernel: ide1 at 0x170-0x177,0x376 on irq 15
(serialized with ide0)
Oct  3 09:30:11 aganet2 kernel: hda: Conner Peripherals 1080MB - CFS1081A,
1032MB w/0kB Cache, CHS=524/64/63
Oct  3 09:30:11 aganet2 kernel: hdd: ATAPI 52X CD-ROM drive, 120kB Cache
Oct  3 09:30:11 aganet2 kernel: Uniform CD-ROM driver Revision: 3.11
Oct  3 09:30:11 aganet2 kernel: Floppy drive(s): fd0 is 1.44M
Oct  3 09:30:11 aganet2 kernel: FDC 0 is a post-1991 82077
Oct  3 09:30:11 aganet2 kernel: md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
Oct  3 09:30:11 aganet2 kernel: scsi: <fdomain> Detection failed (no card)
Oct  3 09:30:11 aganet2 kernel: NCR53c406a: no available ports found
Oct  3 09:30:11 aganet2 kernel: sym53c416.c: Version 1.0.0
Oct  3 09:30:11 aganet2 kernel: Failed initialization of WD-7000 SCSI card!
Oct  3 09:30:11 aganet2 kernel: IBM MCA SCSI: Version 3.2
Oct  3 09:30:11 aganet2 kernel: IBM MCA SCSI: No Microchannel-bus
present --> Aborting.
Oct  3 09:30:11 aganet2 kernel:               This machine does not have any
IBM MCA-bus
Oct  3 09:30:11 aganet2 kernel:               or the MCA-Kernel-support is
not enabled!
Oct  3 09:30:11 aganet2 kernel: megaraid: v1.11 (Aug 23, 2000)
Oct  3 09:30:11 aganet2 kernel: aec671x_detect:
Oct  3 09:30:11 aganet2 kernel: 3ware Storage Controller device driver for
Linux v1.02.00.008.
Oct  3 09:30:11 aganet2 kernel: 3w-xxxx: tw_findcards(): No cards found.
Oct  3 09:30:11 aganet2 kernel: scsi : 0 hosts.
Oct  3 09:30:11 aganet2 kernel: scsi : detected total.
Oct  3 09:30:11 aganet2 kernel: Partition check:
Oct  3 09:30:11 aganet2 kernel:  hda: hda1 hda2 < hda5 >
Oct  3 09:30:11 aganet2 kernel: apm: BIOS version 1.0 Flags 0x0b (Driver
version 1.13)
Oct  3 09:30:11 aganet2 kernel: apm: disabled on user request.
Oct  3 09:30:11 aganet2 kernel: VFS: Mounted root (ext2 filesystem)
readonly.
Oct  3 09:30:11 aganet2 kernel: Freeing unused kernel memory: 152k freed
Oct  3 09:30:11 aganet2 kernel: NET4: Unix domain sockets 1.0 for Linux
NET4.0.
Oct  3 09:30:11 aganet2 kernel: Adding Swap: 66492k swap-space (priority -1)
Oct  3 09:30:11 aganet2 kernel: ne.c:v1.10 9/23/94 Donald Becker
(becker@cesdis.gsfc.nasa.gov)
Oct  3 09:30:11 aganet2 kernel: NE*000 ethercard probe at 0x300: 00 40 33 e0
2d 0f
Oct  3 09:30:11 aganet2 kernel: eth0: NE2000 found at 0x300, using IRQ 10.
Oct  3 09:34:03 aganet2 kernel: VFS: Disk change detected on device fd(2,0)
Oct  3 09:37:04 aganet2 kernel: VFS: Disk change detected on device fd(2,0)
Oct  3 09:39:37 aganet2 kernel: VFS: Disk change detected on device
ide1(22,64)
Oct  3 09:39:40 aganet2 last message repeated 3 times
Oct  3 09:39:51 aganet2 kernel: cdrom: open failed.
Oct  3 09:39:51 aganet2 kernel: VFS: Disk change detected on device
ide1(22,64)
----------



Reply to: