Re: (linux-br) Debian 2.2 e XFree 3.3.6
Voce tem o arquivo ~/.xinitrc ?
Se voce configura nele o window manager, cuidado
pra nao colocar & no final da linha.
O ultimo comando no .xinitrc nao pode retornar,
pois senao o X termina.
-----------------------
Leandro Martelli
martelli@magnux.com.br
-----------------------
On Sat, 2 Sep 2000, cosmo wrote:
> Estou tendo problemas com o XFree 3.3.6. Depois de configurar o XFree atraves do programa
> XF86Setup, que aparentemente deu tudo certo. Mas quando executo o comando startx o XFree eh
> carregado, mas antes de carregar o Window Manager ele, o XFree, "cai" e aparece as seguintes
> mensagens !!
>
> XFree86 Version 3.3.6 / X Window System
> (protocol Version 11, revision 0, vendor release 6300)
> Release Date: January 8 2000
> If the server is older than 6-12 months, or if your card is newer
> than the above date, look for a newer version before reporting
> problems. (see http://www.XFree86.Org/FAQ)
> Operating System: Linux 2.2.17pre10 i686 [ELF]
> Configured drivers:
> SVGA: server for SVGA graphics adaptors (Patchlevel 1):
> NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
> RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256,
> GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
> ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
> ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
> wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati,
> sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
> sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx,
> tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
> tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
> tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
> tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
> cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade,
> clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430,
> clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465,
> clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543,
> clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w,
> mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067,
> oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308,
> ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
> ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422, AT24,
> AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200,
> ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
> ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
> ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci,
> i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic
> (using VT number 7)
>
> XF86Config: /usr/X11R6/lib/X11/XF86Config
> (**) stands for supplied, (--) stands for probed/default values
> (**) XKB: rules: "xfree86"
> (**) XKB: model: "pc101"
> (**) XKB: layout: "us"
> (**) Mouse: type: Microsoft, device: /dev/ttyS0, baudrate: 1200
> (**) Mouse: buttons: 3
> (**) SVGA: Graphics device ID: "Primary Card"
> (**) SVGA: Monitor ID: "Primary Monitor"
> (**) FontPath set to
> "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/cyrillic:unscaled,/usr/X11R6/l
> ib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/S
> peedo,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/cyr
> illic,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/75dpi"
> (--) SVGA: PCI: Trident TGUI 96xx rev 211, Memory @ 0xe0000000, 0xe0400000
> (--) Trident chipset version: 0xd3 (TGUI96xx)
> (--) SVGA: BIOS reports Clock Control Bits 0x0
> (--) SVGA: Detected a Trident 9680.
> (--) SVGA: Revision 1.
> (--) SVGA: Using Trident programmable clocks
> (--) SVGA: chipset: tgui9680
> (**) SVGA: videoram: 2048k
> (**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
> (--) SVGA: Maximum allowed dot-clock: 135.000 MHz
> (**) SVGA: Mode "800x600": mode clock = 40.000
> (**) SVGA: Mode "640x480": mode clock = 31.500
> (--) SVGA: Virtual resolution set to 800x600
> (--) SVGA: SpeedUp code selection modified because virtualX != 1024
> (--) SVGA: Using Linear Frame Buffer at 0x0e0000000, Size 2MB
>
> waiting for X server to shut down
>
> A placa de video eh uma Trident 9668 !!
>
>
> [ ]'s
>
> Cosmo
> cosmo@hackhour.com.br
> www.hackhour.com.br
> Hack Hour Inc.
>
>
> Assinantes em 04/09/2000: 2361
> Mensagens recebidas desde 07/01/1999: 77155
> Historico e [des]cadastramento: http://linux-br.conectiva.com.br
> Assuntos administrativos e problemas com a lista:
> mailto:linux-br-owner@bazar.conectiva.com.br
>
Reply to: