debian + bluetooth

[Dominik Juszczyk <djus@poczta.onet.pl>]

Witam

Probuje za polaczyc sie z siecia uzywajac bluetooth i telefonu:
oto co juz mam:
hciconfig

hci0:   Type: USB
        BD Address: 00:0A:3A:50:CB:C9 ACL MTU: 192:8  SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN
        RX bytes:1199 acl:10 sco:0 events:54 errors:0
        TX bytes:599 acl:9 sco:0 commands:26 errors:0

rfcomm
rfcomm0: 00:0A:3A:50:CB:C9 channel 1 clean

Aparat widzi notebooka, notebook widzi telefon:
hcitool scan
Scanning ...
        00:60:57:76:1A:6E       Mobiltek Nokia7650

polecenie: sdptool search DUN daje takie cos:Inquiring ...
Searching for DUN on 00:60:57:76:1A:6E ...
Service Name: Dial-up Networking
Service RecHandle: 0x10001
Service Class ID List:
  "Dialup Networking" (0x1103)
  "Generic Networking" (0x1201)
Protocol Descriptor List:
  "L2CAP" (0x0100)
  "RFCOMM" (0x0003)
    Channel: 1
Profile Descriptor List:
  "Dialup Networking" (0x1103)
    Version: 0x0100

urzadzennia /dev/rfcomm* istnieja

w /etc/ppp/peers sa dwa pliki:
gprs:/dev/rfcomm0 57600
connect '/usr/sbin/chat -v -f /etc/ppp/peers/chat-gprs'
noauth
defaultroute
debug

i chat-gprs:
TIMEOUT         5
ECHO            ON
ABORT           '\nBUSY\r'
ABORT           '\nERROR\r'
ABORT           '\nNO ANSWER\r'
ABORT           '\nNO CARRIER\r'
ABORT           '\nNO DIALTONE\r'
ABORT           '\nRINGING\r\n\r\nRINGING\r'
''              \rAT
TIMEOUT         12
OK              ATE1
OK              'AT+cgdcont=1,"IP","wap.optus.net.au"'
OK              ATD*99***1#
CONNECT

Niestety polecenie: pppd call gprs owocuje takimi wpisami do syslogu:
Apr 21 20:59:58 localhost pppd[2511]: pppd 2.4.2 started by root, uid 0
Apr 21 20:59:58 localhost pppd[2511]: Failed to open /dev/rfcomm0: No 
route to host
Apr 21 20:59:58 localhost pppd[2511]: Exit.

Co moze byc przyczyna takiego komunikatu?

Wszystko robie jako root.

Z gory dziekuje za wszelka pomoc.




--
Pozdrawiam, Dominik Juszczyk