Co potrzebuje do HTB?
Chcialem zrobic sobie shaping HTB w Debianie stable. Niestety w stable
jest tylko jadro 2.4.18, wiec pociagnalem paczke z 2.4.21 z SIDa,
skompilowalem kernel z HTB i... przy
stary:~# tc qdisc add dev eth0 root handle 1: htb
RTNETLINK answers: Invalid argument
nie bardzo wiem co mam nie tak, ze mi tego nie chce polknac
W tym momencie mam:
stary:~# lsmod
Module Size Used by Not tainted
sch_prio 2816 0 (autoclean)
sch_red 2624 0 (autoclean)
netlink_dev 1728 0 (unused)
sch_sfq 3680 0 (unused)
sch_htb 19136 0 (autoclean) (unused)
ipt_MASQUERADE 1504 1 (autoclean)
ppp_deflate 2944 1 (autoclean)
zlib_deflate 17824 0 (autoclean) [ppp_deflate]
zlib_inflate 18592 0 (autoclean) [ppp_deflate]
bsd_comp 4032 0 (autoclean)
ppp_async 6784 1 (autoclean)
serial 44736 1 (autoclean)
isa-pnp 28604 0 (autoclean) [serial]
ppp_generic 19372 3 (autoclean) [ppp_deflate bsd_comp
ppp_async]
slhc 4608 1 (autoclean) [ppp_generic]
ipt_LOG 3360 7 (autoclean)
iptable_mangle 2240 0 (autoclean) (unused)
iptable_filter 1728 1 (autoclean)
iptable_nat 16852 1 [ipt_MASQUERADE]
ip_conntrack 19604 1 [ipt_MASQUERADE iptable_nat]
ip_tables 11360 7 [ipt_MASQUERADE ipt_LOG iptable_mangle
iptable_filter iptable_nat]
cls_u32 5092 0 (unused)
ne2k-pci 4832 1
vfat 9404 0 (unused)
fat 30424 0 [vfat]
smbfs 33664 0 (unused)
nls_iso8859-2 3360 0 (unused)
nls_iso8859-1 2848 0 (unused)
nls_cp437 4384 0 (unused)
nls_cp852 3616 0 (unused)
nfs 46660 0 (unused)
binfmt_aout 4116 0
paczka iproute2 swieza z stable.
stary:~# ifconfig
eth0 Link encap:Ethernet HWaddr 08:00:32:00:16:8E
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:60786 errors:0 dropped:0 overruns:0 frame:2
TX packets:53037 errors:0 dropped:0 overruns:0 carrier:0
collisions:15 txqueuelen:100
RX bytes:8871833 (8.4 MiB) TX bytes:49554858 (47.2 MiB)
Interrupt:10 Base address:0x6000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:179 errors:0 dropped:0 overruns:0 frame:0
TX packets:179 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:14338 (14.0 KiB) TX bytes:14338 (14.0 KiB)
ppp0 Link encap:Point-to-Point Protocol
/ciach
Mam nadzieje, ze te informacje wystarcza, zeby jakas dobra dusza mi
powiedziala co powinienem zrobic, zeby mi ww. HTB ruszylo jak trzeba.
Z powazaniem ;)
Romek Kalukiewicz
PS. Przepraszam za przydlugie wydruki z komend, ale... no tak juz mam ;]
Reply to: