locale i x-y

warning: process set to nice value 0 instead of -10 as requested

XFree86 Version 3.3.6a / X Window System

(protocol Version 11, revision 0, vendor release 6300)

Release Date: xx November 2000

If the server is older than 6-12 months, or if your card is newer

than the above date, look for a newer version before reporting

problems. (see http://www.XFree86.Org/FAQ)

Operating System: Linux 2.4.13 i686 [ELF]

Configured drivers:

SVGA: server for SVGA graphics adaptors (Patchlevel 1):

NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,

RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256,

GeForce DDR, Quadro, GeForce2 GTS, GeForce2 GTS (rev1),

GeForce2 Ultra, Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR,

Quadro 2 MXR, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,

ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,

ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,

wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati,

sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,

sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx,

tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,

tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,

tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,

tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,

cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade,

clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430,

clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465,

clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543,

clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w,

mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067,

oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308,

ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,

ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422, AT24,

AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200,

ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,

ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,

ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci,

Voodoo Banshee, Voodoo3, smi, generic

(using VT number 7)

XF86Config: /etc/X11/XF86Config

(**) stands for supplied, (--) stands for probed/default values

(**) XKB: keycodes: "xfree86"

(**) XKB: types: "default"

(**) XKB: compat: "default"

(**) XKB: symbols: "en_US(pc104)+pl"

(**) XKB: geometry: "pc"

(**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3

(**) SVGA: Graphics device ID: "(null)"

(**) SVGA: Monitor ID: "Hundai"

(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.

(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.

(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.

(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.

(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.

(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.

(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.

(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.

(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.

(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.

(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.

(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.

(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.

(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.

(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.

(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.

(**) FontPath set to "/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/"

(--) SVGA: PCI: NVidia/SGS-Thomson Riva128 rev 16, Memory @ 0xd8000000, 0xa8000000

(--) SVGA: chipset: RIVA 128

(--) SVGA: videoram: 4064k

(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666

(--) SVGA: Maximum allowed dot-clock: 256.000 MHz

(**) SVGA: Mode "800x600": mode clock = 69.650

(--) SVGA: Virtual resolution set to 800x600

(--) SVGA: SpeedUp code selection modified because virtualX != 1024

(--) SVGA: RIVA 128: Using hardware cursor

(--) SVGA: Using XAA (XFree86 Acceleration Architecture)

(--) SVGA: XAA: Solid filled rectangles

(--) SVGA: XAA: Screen-to-screen copy

(--) SVGA: XAA: 8x8 color expand pattern fill

(--) SVGA: XAA: Using 6 128x128 areas for pixmap caching

(--) SVGA: XAA: Caching tiles and stipples

(--) SVGA: XAA: Horizontal and vertical lines and segments

Fatal server error:

could not open default font 'fixed'

When reporting a problem related to a server crash, please send

the full server output, not just the last messages

XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"

after 0 requests (0 known processed) with 0 events remaining.

# File generated by xf86config.

# Permission is hereby granted, free of charge, to any person obtaining a

# copy of this software and associated documentation files (the "Software"),

# to deal in the Software without restriction, including without limitation

# the rights to use, copy, modify, merge, publish, distribute, sublicense,

# and/or sell copies of the Software, and to permit persons to whom the

# Software is furnished to do so, subject to the following conditions:

# The above copyright notice and this permission notice shall be included in

# all copies or substantial portions of the Software.

# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL

# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF

# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

# SOFTWARE.

# Except as contained in this notice, the name of the XFree86 Project shall

# not be used in advertising or otherwise to promote the sale, use or other

# dealings in this Software without prior written authorization from the

# XFree86 Project.

# **********************************************************************

# Refer to the XF86Config-v3(5) man page for details about the format of

# this file.

# **********************************************************************

# Files section. This allows default font and rgb paths to be set

# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the

# file minus the extension (like ".txt" or ".db"). There is normally

# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),

# as well as specifying multiple comma-separated entries in one FontPath

# command (or a combination of both methods)

# If you don't have a floating point coprocessor and emacs, Mosaic or other

# programs take long to start up, try moving the Type1 and Speedo directory

# to the end of this list (or comment them out).

# FontPath "/usr/X11R6/lib/X11/fonts/misc/:unscaled"

# FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/:unscaled"

# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"

# FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"

# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"

# FontPath "/usr/X11R6/lib/X11/fonts/Type1/"

# FontPath "/usr/X11R6/lib/X11/fonts/misc/"

# FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"

FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"

# For OSs that support Dynamically loaded modules, ModulePath can be

# used to set a search path for the modules. This is currently supported

# for Linux ELF, FreeBSD 2.x, NetBSD 1.x and OpenBSD 2.x.

# The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************

# Module section -- this is an optional section which is used to specify

# which dynamically loadable modules to load. Dynamically loadable

# modules are currently supported only for Linux ELF, FreeBSD 2.x

# NetBSD 1.x and OpenBSD. Currently, dynamically loadable modules are used

# only for some extended input (XInput) device drivers.

# **********************************************************************

# Section "Module"

# This loads the module for the Joystick driver

# Load "xf86Jstk.so"

# EndSection

# **********************************************************************

# Server flags section.

# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is

# received. This may leave the console in an unusable state, but may

# provide a better stack trace in the core dump to aid in debugging

# NoTrapSignals

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence

# This allows clients to receive this key event.

# DontZap

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching

# sequences. This allows clients to receive these key events.

# DontZoom

# Uncomment this to disable tuning with the xvidtune client. With

# it the client can still run and fetch card and monitor attributes,

# but it will not be allowed to change them. If it tries it will

# receive a protocol error.

# DisableVidModeExtension

# Uncomment this to enable the use of a non-local xvidtune client.

# AllowNonLocalXvidtune

# Uncomment this to disable dynamically modifying the input device

# (mouse and keyboard) settings.

# DisableModInDev

# Uncomment this to enable the use of a non-local client to

# change the keyboard or mouse settings (currently only xset).

# AllowNonLocalModInDev

EndSection

# **********************************************************************

# Input devices

# **********************************************************************

# Keyboard section

# **********************************************************************

Section "Keyboard"

Protocol "Standard"

# when using XQUEUE, comment out the above line, and uncomment the

# following line

# Protocol "Xqueue"

AutoRepeat 500 30

# Let the server do the NumLock processing. This should only be required

# when using pre-R6 clients

# ServerNumLock

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))

# Xleds 1 2 3

# To set the LeftAlt to Meta, RightAlt key to ModeShift,

# RightCtl key to Compose, and ScrollLock key to ModeLock:

# LeftAlt Meta

# RightAlt ModeShift

# RightCtl Compose

# ScrollLock ModeLock

# To disable the XKEYBOARD extension, uncomment XkbDisable.

# XkbDisable

# To customise the XKB settings to suit your keyboard, modify the

# lines below (which are the defaults). For example, for a non-U.S.

# keyboard, you will probably want to use:

# XkbModel "pc102"

# If you have a US Microsoft Natural keyboard, you can use:

# XkbModel "microsoft"

# Then to change the language, change the Layout setting.

# For example, a german layout can be obtained with:

# XkbLayout "de"

# or:

# XkbLayout "de"

# XkbVariant "nodeadkeys"

# If you'd like to switch the positions of your capslock and

# control keys, use:

# XkbOptions "ctrl:swapcaps"

# These are the default XKB settings for XFree86

# XkbRules "xfree86"

# XkbModel "pc101"

# XkbLayout "us"

# XkbVariant ""

# XkbOptions ""

Xkbkeycodes "xfree86"

XkbTypes "default"

XkbCompat "default"

XkbSymbols "en_US(pc104)+pl"

XkbGeometry "pc"

EndSection

# **********************************************************************

# Pointer section

# **********************************************************************

Section "Pointer"

Protocol "PS/2"

Device "/dev/psaux"

# When using XQUEUE, comment out the above two lines, and uncomment

# the following line.

# Protocol "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice

# or for the AceCad tablets which require 9600 baud

# BaudRate 9600

# SampleRate 150

# Emulate3Buttons is an option for 2-button Microsoft mice

# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Emulate3Buttons

# Emulate3Timeout 50

# ChordMiddle is an option for some 3-button Logitech mice

# ChordMiddle

EndSection

# **********************************************************************

# Xinput section -- this is optional and is required only if you

# are using extended input devices. This is for example only. Refer

# to the XF86Config man page for a description of the options.

# **********************************************************************

# Section "Xinput"

# SubSection "WacomStylus"

# Port "/dev/ttyS1"

# DeviceName "Wacom"

# EndSubSection

# SubSection "WacomCursor"

# Port "/dev/ttyS1"

# EndSubSection

# SubSection "WacomEraser"

# Port "/dev/ttyS1"

# EndSubSection

# SubSection "Elographics"

# Port "/dev/ttyS1"

# DeviceName "Elo"

# MinimumXPosition 300

# MaximumXPosition 3500

# MinimumYPosition 300

# MaximumYPosition 3500

# Screen 0

# UntouchDelay 10

# ReportDelay 10

# EndSubSection

# SubSection "Joystick"

# Port "/dev/joy0"

# DeviceName "Joystick"

# TimeOut 10

# MinimumXPosition 100

# MaximumXPosition 1300

# MinimumYPosition 100

# MaximumYPosition 1100

# # CenterX 700

# # CenterY 600

# Delta 20

# EndSubSection

# The Mouse Subsection contains the same type of entries as the

# standard Pointer Section (see above), with the addition of the

# DeviceName entry.

# SubSection "Mouse"

# Port "/dev/mouse2"

# DeviceName "Second Mouse"

# Protocol "Logitech"

# EndSubSection

# EndSection

# **********************************************************************

# Monitor section

# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "Hundai"

VendorName "DeluxScan"

ModelName "5870"

# HorizSync is in kHz unless units are specified.

# HorizSync may be a comma separated list of discrete values, or a

# comma separated list of ranges of values.

# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S

# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 30-70

# HorizSync 30-64 # multisync

# HorizSync 31.5, 35.2 # multiple fixed sync frequencies

# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.

# VertRefresh may be a comma separated list of discrete values, or a

# comma separated list of ranges of values.

# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S

# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 50-150

# Modes can be specified in two formats. A compact one-line format, or

# a multi-line format.

# These two are equivalent

# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

# Mode "1024x768i"

# DotClock 45

# HTimings 1024 1048 1208 1264

# VTimings 768 776 784 817

# Flags "Interlace"

# EndMode

# This is a set of standard mode timings. Modes that are out of monitor spec

# are automatically deleted by the server (provided the HorizSync and

# VertRefresh lines are correct), so there's no immediate need to

# delete mode timings (unless particular mode timings don't work on your

# monitor). With these modes, the best standard mode that your monitor

# and video card can support for a given resolution is automatically

# used.

# 640x400 @ 70 Hz, 31.5 kHz hsync

Modeline "640x400" 25.175 640 664 760 800 400 409 411 450

# 640x480 @ 60 Hz, 31.5 kHz hsync

Modeline "640x480" 25.175 640 664 760 800 480 491 493 525

# 800x600 @ 56 Hz, 35.15 kHz hsync

ModeLine "800x600" 36 800 824 896 1024 600 601 603 625

# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync

Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace

# 640x400 @ 85 Hz, 37.86 kHz hsync

Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync

# 640x480 @ 72 Hz, 36.5 kHz hsync

Modeline "640x480" 31.5 640 680 720 864 480 488 491 521

# 640x480 @ 75 Hz, 37.50 kHz hsync

ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync

# 800x600 @ 60 Hz, 37.8 kHz hsync

Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync

# 640x480 @ 85 Hz, 43.27 kHz hsync

Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync

# 1152x864 @ 89 Hz interlaced, 44 kHz hsync

ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace

# 800x600 @ 72 Hz, 48.0 kHz hsync

Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync

# 1024x768 @ 60 Hz, 48.4 kHz hsync

Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync

# 640x480 @ 100 Hz, 53.01 kHz hsync

Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync

# 1152x864 @ 60 Hz, 53.5 kHz hsync

Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync

# 800x600 @ 85 Hz, 55.84 kHz hsync

Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync

# 1024x768 @ 70 Hz, 56.5 kHz hsync

Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync

# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync

Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace

# 800x600 @ 100 Hz, 64.02 kHz hsync

Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync

# 1024x768 @ 76 Hz, 62.5 kHz hsync

Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823

# 1152x864 @ 70 Hz, 62.4 kHz hsync

Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895

# 1280x1024 @ 61 Hz, 64.2 kHz hsync

Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054

# 1024x768 @ 85 Hz, 70.24 kHz hsync

Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync

# 1152x864 @ 78 Hz, 70.8 kHz hsync

Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908

# 1280x1024 @ 70 Hz, 74.59 kHz hsync

Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync

# 1600x1200 @ 60Hz, 75.00 kHz hsync

Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync

# 1152x864 @ 84 Hz, 76.0 kHz hsync

Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908

# 1280x1024 @ 74 Hz, 78.85 kHz hsync

Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064

# 1024x768 @ 100Hz, 80.21 kHz hsync

Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync

# 1280x1024 @ 76 Hz, 81.13 kHz hsync

Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064

# 1600x1200 @ 70 Hz, 87.50 kHz hsync

Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync

# 1152x864 @ 100 Hz, 89.62 kHz hsync

Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync

# 1280x1024 @ 85 Hz, 91.15 kHz hsync

Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync

# 1600x1200 @ 75 Hz, 93.75 kHz hsync

Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync

# 1600x1200 @ 85 Hz, 105.77 kHz hsync

Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync

# 1280x1024 @ 100 Hz, 107.16 kHz hsync

Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync

# 1800x1440 @ 64Hz, 96.15 kHz hsync

ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync

# 1800x1440 @ 70Hz, 104.52 kHz hsync

ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync

# 512x384 @ 78 Hz, 31.50 kHz hsync

Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync

# 512x384 @ 85 Hz, 34.38 kHz hsync

Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync

# Low-res Doublescan modes

# If your chipset does not support doublescan, you get a 'squashed'

# resolution like 320x400.

# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio

Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan

# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio

Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan

# 320x240 @ 72 Hz, 36.5 kHz hsync

Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan

# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio

ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan

# 400x300 @ 60 Hz, 37.8 kHz hsync

Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan

# 400x300 @ 72 Hz, 48.0 kHz hsync

Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan

# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio

ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan

# 480x300 @ 60 Hz, 37.8 kHz hsync

Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan

# 480x300 @ 63 Hz, 39.6 kHz hsync

Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan

# 480x300 @ 72 Hz, 48.0 kHz hsync

Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan

EndSection

# **********************************************************************

# Graphics device section

# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"

Identifier "Generic VGA"

VendorName "Unknown"

BoardName "Unknown"

Chipset "generic"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# Sample Device for accelerated server:

# Section "Device"

# Identifier "Actix GE32+ 2MB"

# VendorName "Actix"

# BoardName "GE32+"

# Ramdac "ATT20C490"

# Dacspeed 110

# Option "dac_8_bit"

# Clocks 25.0 28.0 40.0 0.0 50.0 77.0 36.0 45.0

# Clocks 130.0 120.0 80.0 31.0 110.0 65.0 75.0 94.0

# EndSection

# Sample Device for Hercules mono card:

# Section "Device"

# Identifier "Hercules mono"

# EndSection

# Device configured by xf86config:

Section "Device"

Identifier "(null)"

VendorName "(null)"

BoardName "(null)"

#VideoRam 0

# Insert Clocks lines here if appropriate

EndSection

# **********************************************************************

# Screen sections

# **********************************************************************

# The Colour SVGA server

Section "Screen"

Driver "svga"

# Use Device "Generic VGA" for Standard VGA 320x200x256

#Device "Generic VGA"

Device "(null)"

Monitor "Hundai"

Subsection "Display"

Depth 8

# Omit the Modes line for the "Generic VGA" device

Modes "800x600"

ViewPort 0 0

# Use Virtual 320 200 for Generic VGA

EndSubsection

Subsection "Display"

Depth 16

Modes "800x600"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 24

Modes "800x600"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 32

Modes "800x600"

ViewPort 0 0

EndSubsection

EndSection

# The 16-color VGA server

Section "Screen"

Driver "vga16"

Device "Generic VGA"

Monitor "Hundai"

Subsection "Display"

Modes "640x480" "800x600"

ViewPort 0 0

Virtual 800 600

EndSubsection

EndSection

# The Mono server

Section "Screen"

Driver "vga2"

Device "Generic VGA"

Monitor "Hundai"

Subsection "Display"

Modes "640x480" "800x600"

ViewPort 0 0

Virtual 800 600

EndSubsection

EndSection

# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64)

Section "Screen"

Driver "accel"

Device "(null)"

Monitor "Hundai"

Subsection "Display"

Depth 8

Modes "800x600"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 16

Modes "800x600"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 24

Modes "800x600"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 32

Modes "800x600"

ViewPort 0 0

EndSubsection

EndSection

boze ale jestem upiednliwy...

Przepraszam

z gory dziekuje za pomoc...

hipiss