Re: myszka

[Dybczynski <dybol@hermes.astro.amu.edu.pl>]

Otao fragment z Debian reference:

3.3 Mouse configuration
3.3.1 PS2 mice

In the case of a PS/2-connector mouse on an ATX motherboard, the signal 
flow should be:

     mouse -> /dev/psaux -> gpm -> /dev/gpmdata = /dev/mouse -> X

This allows the keyboard and mouse to be unplugged and reinitialized by 
restarting gpm upon reconnect. X will stay alive!

For a Logitech 3-button PS2 mice, configuration combinations should be:

     /etc/gpm.conf                 /etc/X11/X86Config or X86Config4
     =============================================================
     device=/dev/psaux             Section "Pointer"
     responsiveness=                 Protocol    "IntelliMouse"
     repeat_type=ms3                 Device      "/dev/gpmdata"
     type=ps2auto   (woody)
     append=""
     --------------------------------------------------------------
     device=/dev/psaux             Section "Pointer"
     responsiveness=                 Protocol    "IntelliMouse"
     repeat_type=raw                 Device      "/dev/gpmdata"
     type=ps2auto  (woody)
     append=""

Zrobilem u siebie wg górnego wariantu i dziala bez problemu. 
Pozdrawiam,
PAD
-- 
/****************************************************************************
 Dr Piotr A. Dybczynski,   Astronomical Observatory, A.Mickiewicz University 
 Sloneczna 36,60-286 Poznan,POLAND,tel +48.61.679670,e-mail: dybol@amu.edu.pl
**********************************************************************PAD***/