Re: Blu-ray Disc ist defekt
Am Mittwoch, 13. November 2013, 18:27:49 schrieb Volker Wysk:
> Nein, und ich will es auch nicht aktivieren, bevor ich eine neue
> funktionierende Sicherungskopie habe.
>
> Die läuft jetzt gerade. Ich rechne damit, daß es bis morgen morgen dauert.
>
> Immerhin ist das Problem bis jetzt nicht erneut aufgetreten. Ich war wohl zu
> ungeduldigt.
Die Sicherung ist fehlgeschlagen! Dieses mal ist es kein Irrtum.
Ich habe folgendes Shellscript verwendet, gespeichert in "dar-Aufruf" (nur zur
Information):
#! /bin/bash
ZS=`date +%Y-%m-%d-%H-%M-%S`
dar --fs-root=/ \
--no-overwrite --alter=secu --create /mnt/extfp/Sicherung/Archive/$ZS \
-X $ZS.*.dar \
-B /root/lib/dar-K.dcf \
-B /home/v/Dar-Parameter \
-B ~v/Dar-Parameter \
--verbose --verbose=skipped --alter=secu \
< /dev/null
"Dar" ist mein Sicherungsprogramm (ähnelt von der Funktionsweise "tar").
In Dar-Parameter sind bloß ein paar "--prune"-Anweisungen. Die Sicherung
sieht so aus:
% time ~v/dar-Aufruf 2>&1 | tee /mnt/extfp/Sicherung/log^C
...
Füge Datei zum Archiv hinzu: ...
Füge Datei zum Archiv hinzu: ...
Füge Datei zum Archiv hinzu: ...
Füge Datei zum Archiv hinzu: ...
/tee: /mnt/extfp/Sicherung/log: Eingabe-/Ausgabefehler
Füge Datei zum Archiv hinzu: ...
Füge Datei zum Archiv hinzu: ...
Füge Datei zum Archiv hinzu: ...
...
Füge Datei zum Archiv hinzu: ...
Füge Datei zum Archiv hinzu: ...
Final memory cleanup...
ES SCHEINT SICH UM EINHARDWARE-PROBLEM ZU HANDELN
Cannot write down the archive: Fehler beim Schreiben der Datei
Eingabe-/Ausgabefehler
Bitte überprüfen Sie ihre Hardware
Auf die ext. Festplatte kann nicht mehr zugegriffen werden:
/mnt/extfp % ls
ls: das Verzeichnis . wird gelesen: Eingabe-/Ausgabefehler
Ich habe auch noch die gekürzte Ausgabe von dmesg als Anlage mitgeschickt. Das
Gerät dm-2 ist dabei die externe Platte.
Jetzt sieht es wirklich so aus, als sei die Platte selbst kaputt,
hardwaremäßig - Oder? Sie ist erst ein knappes Jahr alt, und wurde nur für
Sicherheitskopien genutzt...
Bis dann,
Volker[92828.963273] UDF-fs: Partition marked readonly; forcing readonly mount
[92828.964369] UDF-fs: INFO Mounting volume 'CDROM', timestamp 2013/04/11 09:02 (103c)
[93258.898598] UDF-fs: Partition marked readonly; forcing readonly mount
[93258.899657] UDF-fs: INFO Mounting volume 'CDROM', timestamp 2013/04/11 09:02 (103c)
[94062.811297] ata3.00: exception Emask 0x40 SAct 0x7fffffff SErr 0x800 action 0x6 frozen
[94062.811306] ata3: SError: { HostInt }
[94062.811313] ata3.00: failed command: WRITE FPDMA QUEUED
[94062.811323] ata3.00: cmd 61/20:00:2a:76:a2/00:00:c1:00:00/40 tag 0 ncq 16384 out
[94062.811323] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x44 (timeout)
[94062.811329] ata3.00: status: { DRDY }
[94062.811334] ata3.00: failed command: WRITE FPDMA QUEUED
[94062.811344] ata3.00: cmd 61/60:08:ea:7d:a2/00:00:c1:00:00/40 tag 1 ncq 49152 out
[94062.811344] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)
[94062.811349] ata3.00: status: { DRDY }
[94062.811353] ata3.00: failed command: WRITE FPDMA QUEUED
[94062.811362] ata3.00: cmd 61/20:10:12:77:a2/00:00:c1:00:00/40 tag 2 ncq 16384 out
[94062.811362] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)
... (lange Liste von "failed command: WRITE FPDMA QUEUED" weggelassen) ...
[94062.811823] ata3.00: failed command: WRITE FPDMA QUEUED
[94062.811832] ata3.00: cmd 61/18:e0:fa:76:a2/00:00:c1:00:00/40 tag 28 ncq 12288 out
[94062.811832] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)
[94062.811837] ata3.00: status: { DRDY }
[94062.811841] ata3.00: failed command: WRITE FPDMA QUEUED
[94062.811850] ata3.00: cmd 61/40:e8:a2:7a:a2/03:00:c1:00:00/40 tag 29 ncq 425984 out
[94062.811850] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)
[94062.811855] ata3.00: status: { DRDY }
[94062.811859] ata3.00: failed command: WRITE FPDMA QUEUED
[94062.811868] ata3.00: cmd 61/08:f0:e2:7d:a2/00:00:c1:00:00/40 tag 30 ncq 4096 out
[94062.811868] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)
[94062.811873] ata3.00: status: { DRDY }
[94062.811880] ata3: hard resetting link
[94063.303370] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[94063.316130] ata3.00: configured for UDMA/133
[94063.331459] ata3.00: device reported invalid CHS sector 0
[94063.331469] ata3.00: device reported invalid CHS sector 0
[94063.331477] ata3.00: device reported invalid CHS sector 0
...
[94063.331484] ata3.00: device reported invalid CHS sector 0
[94063.331490] ata3.00: device reported invalid CHS sector 0
[94063.331495] ata3.00: device reported invalid CHS sector 0
[94063.331651] ata3: EH complete
[94262.844687] ata3.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen
[94262.844694] ata3.00: failed command: WRITE FPDMA QUEUED
[94262.844700] ata3.00: cmd 61/38:00:d2:9d:65/00:00:c2:00:00/40 tag 0 ncq 28672 out
[94262.844700] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[94262.844703] ata3.00: status: { DRDY }
[94262.844706] ata3.00: failed command: WRITE FPDMA QUEUED
[94262.844711] ata3.00: cmd 61/c8:08:ea:a5:65/00:00:c2:00:00/40 tag 1 ncq 102400 out
[94262.844711] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[94262.844713] ata3.00: status: { DRDY }
[94262.844716] ata3.00: failed command: WRITE FPDMA QUEUED
[94262.844721] ata3.00: cmd 61/10:10:12:66:64/00:00:c2:00:00/40 tag 2 ncq 8192 out
[94262.844721] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[94262.844725] ata3.00: status: { DRDY }
...
[94262.844932] ata3.00: status: { DRDY }
[94262.844933] ata3.00: failed command: WRITE FPDMA QUEUED
[94262.844937] ata3.00: cmd 61/18:f0:a2:cd:66/00:00:c2:00:00/40 tag 30 ncq 12288 out
[94262.844937] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[94262.844939] ata3.00: status: { DRDY }
[94262.844942] ata3: hard resetting link
[94263.336971] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[94263.349558] ata3.00: configured for UDMA/133
[94263.364904] ata3.00: device reported invalid CHS sector 0
[94263.364914] ata3.00: device reported invalid CHS sector 0
[94263.364919] ata3.00: device reported invalid CHS sector 0
... (rund 20 mal wiederholt) ...
[94263.365031] ata3.00: device reported invalid CHS sector 0
[94263.365035] ata3.00: device reported invalid CHS sector 0
[94263.365068] ata3: EH complete
[94347.004374] sr 5:0:0:0: [sr0] Device not ready
[94347.004383] sr 5:0:0:0: [sr0]
[94347.004387] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[94347.004391] sr 5:0:0:0: [sr0]
[94347.004394] Sense Key : Not Ready [current]
[94347.004400] sr 5:0:0:0: [sr0]
[94347.004404] Add. Sense: Cannot read medium - incompatible format
[94347.004409] sr 5:0:0:0: [sr0] CDB:
[94347.004411] Read(10): 28 00 00 ba 73 cb 00 00 40 00
[94347.004424] end_request: I/O error, dev sr0, sector 48877356
...
[94352.668624] sr 5:0:0:0: [sr0]
[94352.668628] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[94352.668632] sr 5:0:0:0: [sr0]
[94352.668635] Sense Key : Not Ready [current]
[94352.668641] sr 5:0:0:0: [sr0]
[94352.668646] Add. Sense: Cannot read medium - incompatible format
[94352.668650] sr 5:0:0:0: [sr0] CDB:
[94352.668653] Read(10): 28 00 00 ba 73 ff 00 00 02 00
[94352.668666] end_request: I/O error, dev sr0, sector 48877564
[94354.505784] sr 5:0:0:0: [sr0] Device not ready
[94354.505793] sr 5:0:0:0: [sr0]
[94354.505797] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[94354.505801] sr 5:0:0:0: [sr0]
[94354.505804] Sense Key : Not Ready [current]
[94354.505810] sr 5:0:0:0: [sr0]
[94354.505815] Add. Sense: Cannot read medium - incompatible format
[94354.505819] sr 5:0:0:0: [sr0] CDB:
[94354.505822] Read(10): 28 00 00 ba 73 ff 00 00 02 00
[94354.505834] end_request: I/O error, dev sr0, sector 48877564
[94632.034750] usb 1-1.2: USB disconnect, device number 5
[97927.546367] usb 1-1.2: new high-speed USB device number 6 using xhci_hcd
[97927.565057] usb 1-1.2: New USB device found, idVendor=0fce, idProduct=e167
[97927.565066] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[97927.565071] usb 1-1.2: Product: SEMC HSUSB Device
[97927.565076] usb 1-1.2: Manufacturer: SEMC
[97927.565080] usb 1-1.2: SerialNumber: 42583930325658385954
[97927.566095] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[97927.566272] scsi11 : usb-storage 1-1.2:1.0
[97928.567249] scsi 11:0:0:0: Direct-Access SEMC Mass Storage 0100 PQ: 0 ANSI: 4
[97928.567718] sd 11:0:0:0: Attached scsi generic sg4 type 0
[97928.569457] sd 11:0:0:0: [sdd] Attached SCSI removable disk
[97943.841501] sd 11:0:0:0: [sdd] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[97943.841958] sd 11:0:0:0: [sdd] No Caching mode page present
[97943.841967] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[97943.842846] sd 11:0:0:0: [sdd] No Caching mode page present
[97943.842852] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[97943.845335] sdd: sdd1
[100134.121028] usb 3-3: new high-speed USB device number 3 using ehci-pci
[100134.254848] usb 3-3: New USB device found, idVendor=04e8, idProduct=331a
[100134.254858] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[100134.254864] usb 3-3: Product: CLP-360 Series
[100134.254868] usb 3-3: Manufacturer: Samsung Electronics Co., Ltd.
[100134.254872] usb 3-3: SerialNumber: Z6Y7BJACC000Y0R
[100134.412780] usblp 3-3:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x331A
[100134.412824] usbcore: registered new interface driver usblp
[100137.385211] usblp0: removed
[100157.570701] usblp 3-3:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x331A
[100157.570841] usblp0: removed
[100157.688502] usb 3-3: reset high-speed USB device number 3 using ehci-pci
[100157.822230] usblp 3-3:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x331A
[100193.491357] usblp0: removed
[100227.470502] usblp 3-3:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x331A
[100227.470656] usblp0: removed
[100227.586554] usb 3-3: reset high-speed USB device number 3 using ehci-pci
[100227.720002] usblp 3-3:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x331A
[107772.536983] usb 3-3: USB disconnect, device number 3
[107772.537305] usblp0: removed
[141143.623632] usb 1-1.2: USB disconnect, device number 6
[161084.262182] usb 1-1.2: new high-speed USB device number 7 using xhci_hcd
[161084.281010] usb 1-1.2: New USB device found, idVendor=0fce, idProduct=e167
[161084.281019] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[161084.281025] usb 1-1.2: Product: SEMC HSUSB Device
[161084.281029] usb 1-1.2: Manufacturer: SEMC
[161084.281034] usb 1-1.2: SerialNumber: 42583930325658385954
[161084.281911] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[161084.282056] scsi12 : usb-storage 1-1.2:1.0
[161085.283353] scsi 12:0:0:0: Direct-Access SEMC Mass Storage 0100 PQ: 0 ANSI: 4
[161085.283836] sd 12:0:0:0: Attached scsi generic sg4 type 0
[161085.285727] sd 12:0:0:0: [sdd] Attached SCSI removable disk
[161100.609462] sd 12:0:0:0: [sdd] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[161100.609877] sd 12:0:0:0: [sdd] No Caching mode page present
[161100.609882] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[161100.610749] sd 12:0:0:0: [sdd] No Caching mode page present
[161100.610757] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[161100.612931] sdd: sdd1
[161593.516568] usb 1-1.2: USB disconnect, device number 7
[173037.350737] ISO 9660 Extensions: RRIP_1991A
[174224.871697] ata3.00: exception Emask 0x40 SAct 0x7fffffff SErr 0x800 action 0x6 frozen
[174224.871706] ata3: SError: { HostInt }
[174224.871713] ata3.00: failed command: WRITE FPDMA QUEUED
[174224.871723] ata3.00: cmd 61/08:00:d2:ca:39/00:00:21:00:00/40 tag 0 ncq 4096 out
[174224.871723] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x44 (timeout)
[174224.871730] ata3.00: status: { DRDY }
[174224.871734] ata3.00: failed command: WRITE FPDMA QUEUED
[174224.871744] ata3.00: cmd 61/08:08:9a:cb:39/00:00:21:00:00/40 tag 1 ncq 4096 out
[174224.871744] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)
[174224.871749] ata3.00: status: { DRDY }
...
[174224.871753] ata3.00: failed command: WRITE FPDMA QUEUED
[174224.871762] ata3.00: cmd 61/08:10:12:cc:39/00:00:21:00:00/40 tag 2 ncq 4096 out
[174224.871762] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)
[174224.871768] ata3.00: status: { DRDY }
[174224.871772] ata3.00: failed command: WRITE FPDMA QUEUED
[174224.871781] ata3.00: cmd 61/08:18:6a:cc:39/00:00:21:00:00/40 tag 3 ncq 4096 out
[174224.871781] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)
[174224.871786] ata3.00: status: { DRDY }
[174224.871790] ata3.00: failed command: WRITE FPDMA QUEUED
[174224.871799] ata3.00: cmd 61/60:20:1a:29:8a/00:00:2b:00:00/40 tag 4 ncq 49152 out
[174224.871799] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)
...
[174224.872265] ata3.00: failed command: WRITE FPDMA QUEUED
[174224.872274] ata3.00: cmd 61/28:f0:02:cb:39/00:00:21:00:00/40 tag 30 ncq 20480 out
[174224.872274] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)
[174224.872279] ata3.00: status: { DRDY }
[174224.872285] ata3: hard resetting link
[174225.363917] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[174225.376613] ata3.00: configured for UDMA/133
[174225.391921] ata3.00: device reported invalid CHS sector 0
[174225.391929] ata3.00: device reported invalid CHS sector 0
[174225.391935] ata3.00: device reported invalid CHS sector 0
[174225.391939] ata3.00: device reported invalid CHS sector 0
[174225.391943] ata3.00: device reported invalid CHS sector 0
...
[174225.392039] ata3.00: device reported invalid CHS sector 0
[174225.392043] ata3.00: device reported invalid CHS sector 0
[174225.392076] ata3: EH complete
[174359.298880] [drm:subconnector_show] *ERROR* Unable to find subconnector property
[174359.331168] [drm:select_subconnector_show] *ERROR* Unable to find select subconnector property
[174360.130572] WARNING! power/level is deprecated; use power/control instead
[179650.539777] usb 2-2: reset SuperSpeed USB device number 2 using xhci_hcd
[179650.557572] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted.
[179650.558821] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880222822e40
[179650.558840] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880222822e80
[225844.115948] usb 2-2: reset SuperSpeed USB device number 2 using xhci_hcd
[225844.133426] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted.
[225844.134738] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880222822e40
[225844.134769] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880222822e80
[225998.134823] usb 2-2: reset SuperSpeed USB device number 2 using xhci_hcd
[225998.152607] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted.
[225998.153780] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880222822e40
[225998.153823] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880222822e80
[226203.202708] usb 2-2: reset SuperSpeed USB device number 2 using xhci_hcd
[226203.220367] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted.
[226203.221750] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880222822e40
[226203.221759] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880222822e80
[226220.874460] usb 2-2: device not accepting address 2, error -22
[226221.426787] usb 2-2: USB disconnect, device number 2
[226221.426857] sd 8:0:0:0: Device offlined - not ready after error recovery
[226221.426879] sd 8:0:0:0: [sdc] Unhandled error code
[226221.426884] sd 8:0:0:0: [sdc]
[226221.426887] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
[226221.426891] sd 8:0:0:0: [sdc] CDB:
[226221.426894] Write(10): 2a 00 29 16 63 8a 00 00 1e 00
[226221.426917] end_request: I/O error, dev sdc, sector 5514665040
[226221.426932] Buffer I/O error on device dm-2, logical block 664918666
[226221.426935] lost page write due to I/O error on dm-2
[226221.426942] Buffer I/O error on device dm-2, logical block 664918667
[226221.426945] lost page write due to I/O error on dm-2
[226221.426952] Buffer I/O error on device dm-2, logical block 664918668
[226221.426954] lost page write due to I/O error on dm-2
[226221.426960] Buffer I/O error on device dm-2, logical block 664918669
[226221.426963] lost page write due to I/O error on dm-2
[226221.426969] Buffer I/O error on device dm-2, logical block 664918670
[226221.426972] lost page write due to I/O error on dm-2
[226221.426978] Buffer I/O error on device dm-2, logical block 664918671
[226221.426981] lost page write due to I/O error on dm-2
[226221.426988] Buffer I/O error on device dm-2, logical block 664918672
[226221.426990] lost page write due to I/O error on dm-2
[226221.426996] Buffer I/O error on device dm-2, logical block 664918673
[226221.426999] lost page write due to I/O error on dm-2
[226221.427005] Buffer I/O error on device dm-2, logical block 664918674
[226221.427008] lost page write due to I/O error on dm-2
[226221.427014] Buffer I/O error on device dm-2, logical block 664918675
[226221.427017] lost page write due to I/O error on dm-2
[226221.427142] EXT3-fs error (device dm-2): read_block_bitmap: Cannot read block bitmap - block_group = 20292, block_bitmap = 664928256
[226221.427145] sd 8:0:0:0: [sdc] Unhandled error code
[226221.427150] sd 8:0:0:0: [sdc]
[226221.427154] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[226221.427158] sd 8:0:0:0: [sdc] CDB:
[226221.427160] Write(10): 2a 00 29 16 63 a8 00 00 1e 00
[226221.427177] end_request: I/O error, dev sdc, sector 5514665280
[226221.440922] EXT3-fs (dm-2): I/O error while writing superblock
[226221.441011] EXT3-fs: ext3_journal_dirty_data: aborting transaction: IO failure in ext3_journal_dirty_data
[226221.441033] EXT3-fs (dm-2): error in ext3_orphan_add: Readonly filesystem
[226221.441069] EXT3-fs error (device dm-2): read_block_bitmap: Cannot read block bitmap - block_group = 20292, block_bitmap = 664928256
[226221.441127] sd 8:0:0:0: [sdc] Synchronizing SCSI cache
[226221.441236] sd 8:0:0:0: [sdc]
[226221.441241] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[226221.441436] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880222822e40
[226221.441445] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880222822e80
[226221.442052] EXT3-fs (dm-2): I/O error while writing superblock
[226221.442059] EXT3-fs (dm-2): I/O error while writing superblock
[226221.442066] EXT3-fs (dm-2): error in ext3_ordered_write_end: IO failure
[226221.442920] EXT3-fs (dm-2): I/O error while writing superblock
[226221.443076] EXT3-fs: ext3_journal_dirty_data: aborting transaction: IO failure in ext3_journal_dirty_data
[226221.443084] EXT3-fs (dm-2): error in ext3_orphan_add: Readonly filesystem
[226221.443914] EXT3-fs (dm-2): I/O error while writing superblock
[226221.443923] EXT3-fs (dm-2): error in ext3_ordered_write_end: IO failure
[226221.444752] EXT3-fs (dm-2): I/O error while writing superblock
[226221.477726] JBD: Detected IO errors while flushing file data on dm-2
[226221.479152] Aborting journal on device dm-2.
[226221.479186] JBD: Error -5 detected when updating journal superblock for dm-2.
[226221.615094] JBD: Detected IO errors while flushing file data on dm-2
[226222.283154] usb 2-2: device not accepting address 3, error -22
[226223.691831] usb 2-2: device not accepting address 5, error -22
[226225.100535] usb 2-2: device not accepting address 7, error -22
[226226.509211] usb 2-2: device not accepting address 9, error -22
[226227.917901] usb 2-2: device not accepting address 11, error -22
[226229.209748] EXT3-fs (dm-2): error: ext3_journal_start_sb: Detected aborted journal
[226229.209757] EXT3-fs (dm-2): error: remounting filesystem read-only
[226247.427559] usb 2-2: new SuperSpeed USB device number 13 using xhci_hcd
[226247.445890] usb 2-2: Parent hub missing LPM exit latency info. Power management will be impacted.
[226247.449705] usb 2-2: New USB device found, idVendor=0bc2, idProduct=a0a4
[226247.449714] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[226247.449720] usb 2-2: Product: Backup+ Desk
[226247.449724] usb 2-2: Manufacturer: Seagate
[226247.449729] usb 2-2: SerialNumber: NA5J6K2H
[226247.450741] usb-storage 2-2:1.0: USB Mass Storage device detected
[226247.450994] scsi13 : usb-storage 2-2:1.0
[226248.448949] scsi 13:0:0:0: Direct-Access Seagate Backup+ Desk 0503 PQ: 0 ANSI: 6
[226248.449464] sd 13:0:0:0: Attached scsi generic sg3 type 0
[226248.449684] sd 13:0:0:0: [sdd] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
[226248.450432] sd 13:0:0:0: [sdd] Write Protect is off
[226248.450439] sd 13:0:0:0: [sdd] Mode Sense: 43 00 00 00
[226248.451194] sd 13:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[226248.451677] sd 13:0:0:0: [sdd] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
[226248.481515] sdd: sdd2 sdd3
[226248.482392] sd 13:0:0:0: [sdd] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
[226248.484013] sd 13:0:0:0: [sdd] Attached SCSI disk
[253922.626019] usb 1-1.2: new high-speed USB device number 8 using xhci_hcd
[253922.644976] usb 1-1.2: New USB device found, idVendor=0fce, idProduct=e167
[253922.644985] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[253922.644991] usb 1-1.2: Product: SEMC HSUSB Device
[253922.644995] usb 1-1.2: Manufacturer: SEMC
[253922.645000] usb 1-1.2: SerialNumber: 42583930325658385954
[253922.645873] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[253922.645995] scsi14 : usb-storage 1-1.2:1.0
[253923.647748] scsi 14:0:0:0: Direct-Access SEMC Mass Storage 0100 PQ: 0 ANSI: 4
[253923.648408] sd 14:0:0:0: Attached scsi generic sg4 type 0
[253923.649342] sd 14:0:0:0: [sde] Attached SCSI removable disk
[253949.842716] sd 14:0:0:0: [sde] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[253949.843064] sd 14:0:0:0: [sde] No Caching mode page present
[253949.843071] sd 14:0:0:0: [sde] Assuming drive cache: write through
[253949.843801] sd 14:0:0:0: [sde] No Caching mode page present
[253949.843809] sd 14:0:0:0: [sde] Assuming drive cache: write through
[253949.845848] sde: sde1
Reply to: