[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Problem debian dhcp-Server installieren



Hallo,

ich brauche einfach einen kleinen debian dhcp-Server für ein PXE-Bootthema.
Ganz offensichtlich übersehe ich etwas.

Jun 2 10:53:56 srvm23 dhcpd: No subnet declaration for eth0 (192.168.26.86). Jun 2 10:53:56 srvm23 dhcpd: ** Ignoring requests on eth0. If this is not what
Jun  2 10:53:56 srvm23 dhcpd:    you want, please write a subnet declaration
Jun 2 10:53:56 srvm23 dhcpd: in your dhcpd.conf file for the network segment
Jun  2 10:53:56 srvm23 dhcpd:    to which interface eth0 is attached. **
Jun  2 10:53:56 srvm23 dhcpd:
Jun  2 10:53:56 srvm23 dhcpd:
Jun  2 10:53:56 srvm23 dhcpd: Not configured to listen on any interfaces!
Jun  2 11:02:32 srvm23 dhcpd: Internet Systems Consortium DHCP Server V3.1.1
Jun 2 11:02:32 srvm23 dhcpd: Copyright 2004-2008 Internet Systems Consortium.
Jun  2 11:02:32 srvm23 dhcpd: All rights reserved.
Jun 2 11:02:32 srvm23 dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
Jun  2 11:02:32 srvm23 dhcpd: Wrote 0 leases to leases file.
Jun  2 11:02:32 srvm23 dhcpd:
Jun 2 11:02:32 srvm23 dhcpd: No subnet declaration for eth0 (192.168.26.86). Jun 2 11:02:32 srvm23 dhcpd: ** Ignoring requests on eth0. If this is not what
Jun  2 11:02:32 srvm23 dhcpd:    you want, please write a subnet declaration
Jun 2 11:02:32 srvm23 dhcpd: in your dhcpd.conf file for the network segment
Jun  2 11:02:32 srvm23 dhcpd:    to which interface eth0 is attached. **
Jun  2 11:02:32 srvm23 dhcpd:
Jun  2 11:02:32 srvm23 dhcpd:
Jun  2 11:02:32 srvm23 dhcpd: Not configured to listen on any interfaces!


subnet 192.168.26.0 netmask 255.255.255.0 {
option domain-name "winter-do";
option domain-name-servers 192.168.26.15;
option routers 192.168.26.15;
option subnet-mask 255.255.255.0;
  range 192.168.26.98 192.168.26.99;
#  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
}



dhcp-server
# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
#       Separate multiple interfaces with spaces, e.g. "eth0 eth1".
INTERFACES="eth0"


Danke für einen kutzen Tip.

Gruß


Reply to: