sata_sis Modul macht neuer 2.6.18 Probleme - ata1: SATA link down
Hi Leute,
hab hier folgenden SATA-Kontroller auf einem Board:
00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA (rev
01) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Device d61f
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
I/O ports at 2328 [size=8]
I/O ports at 2334 [size=4]
I/O ports at 2320 [size=8]
I/O ports at 2330 [size=4]
I/O ports at 2300 [size=16]
I/O ports at 2200 [size=128]
Capabilities: [58] Power Management version 2
Kernel driver in use: sata_sis
Kernel modules: sata_sis
2.6.18 Kernel von Debian erkennt die Platten einwandfrei:
http://plzk.de/dmesg-2.6.18-6-k7
http://plzk.de/lsmod-2.6.18-6-k7
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
2.6.26 erkennt sie jedoch nicht:
http://plzk.de/dmesg-2.6.26-2-686
http://plzk.de/lsmod-2.6.26-2-686
ata1: SATA link down (SStatus 1 SControl 300)
ata2: SATA link down (SStatus 1 SControl 300)
Aus irgendeinem Grund erkennt er die SATA-Ports als inaktiv/offline.
Ideen?
Danke
Stefan
--
Stefan Bauer -----------------------------------------
PGP: E80A 50D5 2D46 341C A887 F05D 5C81 5858 DCEF 8C34
-------- plzk.de - Linux - because it works ----------
Reply to: