sensord ALARM Meldung im Syslog
Hallo zusammen,
ich benutze auf einem Debian Lenny zur Abfrage der Temperaturdaten sensord. Jetzt tritt sei geraumer Zeit die folgenden Meldungen auf:
Feb 9 05:02:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: VCore: +1.52 V (min = +0.86 V, max = +1.28 V) [ALARM]
Feb 9 05:02:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: +3.3V: +3.38 V (min = +2.43 V, max = +0.18 V) [ALARM]
Feb 9 05:02:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: +5V: +5.03 V (min = +1.29 V, max = +3.01 V) [ALARM]
Feb 9 05:02:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: -12V: +0.63 V (min = -9.40 V, max = -13.10 V) [ALARM]
Feb 9 05:02:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: -5V: +5.10 V (min = -6.45 V, max = +4.90 V) [ALARM]
Feb 9 05:02:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: V5SB: +5.19 V (min = +0.32 V, max = +0.00 V) [ALARM]
Feb 9 05:02:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: VBat: +3.15 V (min = +1.28 V, max = +0.24 V) [ALARM]
Feb 9 05:02:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: fan1: 1088 RPM (min = 1180 RPM, div = 8) [ALARM]
Feb 9 05:02:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: fan2: 0 RPM (min = 84375 RPM, div = 2) [ALARM]
Feb 9 05:02:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: temp1: 32.0 C (limit = 8.0 C, hysteresis = -106.0 C) [ALARM]
Feb 9 05:03:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: VCore: +1.52 V (min = +0.86 V, max = +1.28 V) [ALARM]
Feb 9 05:03:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: +3.3V: +3.38 V (min = +2.43 V, max = +0.18 V) [ALARM]
Feb 9 05:03:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: +5V: +5.03 V (min = +1.29 V, max = +3.01 V) [ALARM]
Feb 9 05:03:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: -12V: +0.63 V (min = -9.40 V, max = -13.10 V) [ALARM]
Feb 9 05:03:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: -5V: +5.10 V (min = -6.45 V, max = +4.90 V) [ALARM]
Feb 9 05:03:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: V5SB: +5.16 V (min = +0.32 V, max = +0.00 V) [ALARM]
Feb 9 05:03:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: VBat: +3.15 V (min = +1.28 V, max = +0.24 V) [ALARM]
Feb 9 05:03:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: fan1: 1095 RPM (min = 1180 RPM, div = 8) [ALARM]
Feb 9 05:03:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: fan2: 0 RPM (min = 84375 RPM, div = 2) [ALARM]
Feb 9 05:03:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: temp1: 32.0 C (limit = 8.0 C, hysteresis = -106.0 C) [ALARM]
Feb 9 05:04:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: VCore: +1.52 V (min = +0.86 V, max = +1.28 V) [ALARM]
Feb 9 05:04:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: +3.3V: +3.38 V (min = +2.43 V, max = +0.18 V) [ALARM]
Feb 9 05:04:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: +5V: +5.03 V (min = +1.29 V, max = +3.01 V) [ALARM]
Feb 9 05:04:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: -12V: +0.72 V (min = -9.40 V, max = -13.10 V) [ALARM]
Feb 9 05:04:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: -5V: +5.10 V (min = -6.45 V, max = +4.90 V) [ALARM]
Feb 9 05:04:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: V5SB: +5.19 V (min = +0.32 V, max = +0.00 V) [ALARM]
Feb 9 05:04:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: VBat: +3.17 V (min = +1.28 V, max = +0.24 V) [ALARM]
Feb 9 05:04:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: fan1: 1081 RPM (min = 1180 RPM, div = 8) [ALARM]
Feb 9 05:04:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: fan2: 0 RPM (min = 84375 RPM, div = 2) [ALARM]
Feb 9 05:04:43 lic-srv-as-07 sensord: Sensor alarm: Chip w83697hf-isa-0290: temp1: 32.0 C (limit = 8.0 C, hysteresis = -106.0 C) [ALARM]
Ich habe schon versucht in der conf-Datei die Daten dementsprechend anzupassen, doch leider ignoriert das der Daemon. Habt Ihr ideen, wie ich das noch anpassen könnte?
Vielen Dank im Voraus.
Ronny
Reply to: