[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: HD meines Laptops verstorben? Smartcfg zeigt Fehler



Also schrieben Sie am Sonntag, 20. Dezember 2009 17:11:12:
> Tag Liste,
> 

(Ich hatte diese Mail in erster Linie der Niederländischen Linuxliste geschickt, und 
nun nicht alles verdeutscht. Das habe ich jetzt nachgeholt). 

Tag Liste,

seit einiger Zeit macht mir meine HD meines IBM Thinkpads einigen Kummer.
Hin und wieder verabschiedet sich KDE 'einfach so' und kann nicht wieder hergestellt 
werden. Nur noch ein 'e2fsch -yvf' kann dann noch Abhilfe schaffen. Es laufen dann 
meterweise Fehlermeldungen über die Konsole (von wegen Reparatur hier und da), aber 
danach habe ich für einige Wochen wieder Ruhe.

Nur: seit Vorgestern kann der e2fsck die Sache nicht mehr reparieren.
Mit smartcfg habe ich die Platte kontrolliert. Der schnelle Test verläuft fehlerfrei. 
Der Gründliche aber findet einen Fehler und bricht bei 50% mit der folgenden Meldung 
ab: (ich bin nicht so bekannt mit Smartcfg. Vielleicht kann da jemand mal mitlesen?)


 - # 3  Extended offline  Completed: read failure  50%  (life time:)8876  (lba:)41793352

In den Error log steht noch das folgende:
  Error 33 occurred at disk power-on lifetime: 639 hours (26 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 01 88 1c 5f e3  Error: IDNF 1 sectors at LBA = 0x035f1c88 = 56564872



TestDisk spuckt folgendes aus:

  Disk /dev/hda - 30 GB / 27 GiB - CHS 62016 15 63
  Current partition structure:
       Partition                  Start        End    Size in sectors

   1 P Linux                    0   1  1 33948  14 63   32081742 [Debian4]
  Warning: Bad ending head (CHS and LBA don't match)

  Warning: Incorrect number of heads/cylinder 240 (NTFS) != 15 (HD)
   2 * HPFS - NTFS          33949   0  1 59822  14 63   24450930 [WinXPde]
  Warning: Bad starting head (CHS and LBA don't match)

  3 P Linux Swap           59832   0  1 62015  14 63    2063880
  Warning: Bad starting head (CHS and LBA don't match)



Eine komische Fehlermeldung, dass CHS und LBA nicht die gleichen sind. Wo kann ich so 
etwas einstellen. Im BIOS bin ich nicht fündig geworden. Oder geht so etwas über 
cfdisk, gleich beim partitionieren?

Des weiteren fällt auf dass der Rechner oft hängen bleibt während eines e2fsck. 
Manchmal mit einer Kernelpanik, auch oft ohne. Auch während des Tests mit TestDisk ist 
der Rechner hängen geblieben.


Für die Vollständigkeit noch den Output von 'smartctl' -i -H -c '/dev/hda':

smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi Travelstar 80GN family
Device Model:     IC25N030ATMR04-0
Serial Number:    MRG215K2K7YUYJ
Firmware Version: MOAOADEA
User Capacity:    30,005,821,440 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 3a
Local Time is:    Sat Dec 19 13:56:26 2009 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 117) The previous self-test completed having
                                        the read element of the test failed.
Total time to complete Offline 
data collection:                 ( 645) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  37) minutes.


Muss da wohl eine neue HD rein? 



-- 
Namastè,

   X Ulrich X
          X

¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø

           "If God had intended mankind to run around naked, 
                                                            surely we'd have been born 
that way!"
                             (but now it's winter ...)

¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø
http://afamiliajuramidam.org/english/             OS: Kubuntu 9.04 (Linux)        


Reply to: