[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Server bootet nicht mehr



Hi, ich hoffe hier bin ich richtig. Ich habe einen Root-Server bei Strato (AMD64 Quadcore, 2x500GB RAID1) der mit Debian 5 läuft. Gestern abend habe ich ihn neu gebootet, weil ein neuer Kernel von Debian installiert worden war. Dieser Boot schlug fehl, in der Konsole konnte ich diese Meldungen mitloggen:

[ 12.336459] SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1
[ 12.449268] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 12.464145] PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:14.1
[ 12.478601] SB600_PATA: can't reserve resources
[ 12.487711] ATIIXP_IDE: probe of 0000:00:14.1 failed with error -16
done.
Begin: Mounting root file system ... Begin: Running /scripts/loc[ 12.648363] md: md1 stopped.
al-top ... Begin: LoadingSuccess: loaded module raid1.
done.
Begin: Assembling MD array /dev/md1 ... mdadm: no devices found for /dev/md1
Failure: failed to start /dev/md1
done.
Begin: Waiting for udev to process events ... done.
done.
Begin: Running /scripts/local-premount ... done.
mount: mounting /dev/md1 on /root failed: No such device
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... mount: mounting /dev on /root/dev failed: No such file or directory
done.
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have /sbin/init.
No init found. Try passing init= bootarg.
BusyBox v1.10.2 (Debian 1:1.10.2-2) built-in shell (ash)
Enter 'help' for a list of built-in commands.

Das sieht also nach einem Festplattenfehler aus. Wenn ich jedoch das System im Rescue-Modus boote, kann ich problemlos das RAID mounten und via chroot in das System wechseln. Dort habe ich keine Fehler gefunden. smartctl läuft sauber durch, cat /proc/mdstat zeigt ein einwandfreies RAID. Geistig habe ich mich schon auf eine Neuinstallation eingerichtet, Backups sind (natürlich) vorhanden. Das würde ich aber gern vermeiden, weiss jemand Rat?
Eggert


Reply to: