Re: Partition nicht erreichbar
Hallo,
klaus zerwes wrote:
> Wolf Wiegand schrieb:
> >
> > $ dmesg | grep sda
> > [ 4.942019] sd 0:0:1:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
> > [ 4.942019] sd 0:0:1:0: [sda] Write Protect is off
> > [ 4.942019] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
> > [ 4.942019] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > [ 4.947526] sd 0:0:1:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
> > [ 4.949723] sd 0:0:1:0: [sda] Write Protect is off
> > [ 4.949784] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
> > [ 4.954981] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > [ 4.954981] sda: sda1
> > [ 4.954982] sd 0:0:1:0: [sda] Attached SCSI disk
> > [ 7.062466] md: bind<sda>
> > [ 7.077184] raid0: looking at sda
> > [ 7.077184] raid0: comparing sda(156290816) with sda(156290816)
> > [ 7.077323] md: unbind<sda>
> > [ 7.077381] md: export_rdev(sda)
>
> Äh ... was macht md da?
Gute Frage. Auf der Platte war vor dem Einbau mal ein Teil eines
RAID-0-Arrays (Gab übrigens spektakuläre Fehlermeldungen, als nach dem
Einbau erst probiert wurde, vom neuen sda zu booten (-: )
> > $ fdisk -l /dev/sda | grep LVM
> > /dev/sda1 1 19457 156288321 8e Linux LVM
>
> lass mal das grep dahinter weg.
# fdisk -l /dev/sda
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 1 19457 156288321 8e Linux LVM
Schönen Gruß,
Wolf
--
Jetzt ist Frühlingszeit - Zeit für neue, jahreszeitbedingte Bauernregeln: Die
Frühlingsluft riecht frisch und zärtlich, der Winter sagt: Ich habe
fertig...! (Harald Schmidt)
Reply to: