Re: /dev/cdrom in k3b weg
Christian Schnitz schrieb:
...
Hallo,
hast du schon die Rechte überprüft? Kannst du auf der Console Brennen
(user/root)?
Ich hab jetzt mal k3b als root gestartet, das läuft, scheint also was
mit den Rechten zu tun zu haben.
Folgendes wird beim Start an der Console ausgegeben:
root@linux:~# (K3bDevice::HalConnection) initializing HAL >= 0.5
/dev/hdb resolved to /dev/hdb
/dev/hdb is block device (64)
/dev/hdb seems to be cdrom
(K3bDevice::Device) /dev/hdb: init()
(K3bDevice::Device) /dev/hdb feature: CD Mastering
(K3bDevice::Device) /dev/hdb feature: CD Track At Once
(K3bDevice::Device) /dev/hdb feature: DVD+R
(K3bDevice::Device) /dev/hdb feature: DVD+RW
(K3bDevice::Device) /dev/hdb feature: DVD+R Double Layer
(K3bDevice::Device) /dev/hdb feature: DVD-R/-RW Write
(K3bDevice::Device) /dev/hdb feature: Rigid Restricted Overwrite
(K3bDevice::Device) /dev/hdb: dataLen: 60
(K3bDevice::Device) /dev/hdb: checking for TAO
(K3bDevice::Device) /dev/hdb: checking for SAO
(K3bDevice::Device) /dev/hdb: checking for SAO_R96P
(K3bDevice::ScsiCommand) failed:
command: MODE SELECT (55)
errorcode: 70
sense key: ILLEGAL REQUEST (5)
asc: 26
ascq: 0
(K3bDevice::Device) /dev/hdb: checking for SAO_R96R
(K3bDevice::Device) /dev/hdb: checking for RAW_R16
(K3bDevice::ScsiCommand) failed:
command: MODE SELECT (55)
errorcode: 70
sense key: ILLEGAL REQUEST (5)
asc: 26
ascq: 0
(K3bDevice::Device) /dev/hdb: checking for RAW_R96P
(K3bDevice::ScsiCommand) failed:
command: MODE SELECT (55)
errorcode: 70
sense key: ILLEGAL REQUEST (5)
asc: 26
ascq: 0
(K3bDevice::Device) /dev/hdb: checking for RAW_R96R
(K3bDevice::Device) /dev/hdb: GET PERFORMANCE dataLen = 104
(K3bDevice::Device) /dev/hdb: GET PERFORMANCE successful with reported
length: 100
(K3bDevice::Device) /dev/hdb: Number of supported write speeds via GET
PERFORMANCE: 6
(K3bDevice::Device) /dev/hdb : 5645 KB/s
(K3bDevice::Device) /dev/hdb : 4234 KB/s
(K3bDevice::Device) /dev/hdb : 3528 KB/s
(K3bDevice::Device) /dev/hdb : 2822 KB/s
(K3bDevice::Device) /dev/hdb : 1411 KB/s
(K3bDevice::Device) /dev/hdb Invalid DVD speed: 706 KB/s
(K3bDevice::DeviceManager) setting current write speed of device
/dev/hdb to 3324
(K3bDevice::DeviceManager) SCANNING FOR GENERIC DEVICES.
bus: 1, id: 0, lun: 0
bus: 4, id: 0, lun: 0
Could not resolve /dev/sg2
... [hier werden jetzt alle Festplattenpartitionen gelistet]
(K3bDevice::DeviceManager) found config entry for devicetype: _NEC
DVD_RW ND-2510A
Devices:
------------------------------
Blockdevice: /dev/hdb
Generic device:
Vendor: _NEC
Description: DVD_RW ND-2510A
Version: 2.15
Write speed: 5600
Profiles: DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite,
DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
Read Cap: DVD-ROM, DVD-R, DVD-R Sequential, DVD-RW, DVD-RW
Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual
Layer, CD-ROM, CD-R, CD-RW
Write Cap: DVD-R, DVD-R Sequential, DVD-RW, DVD-RW Restricted
Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-R, CD-RW
Writing modes: SAO, TAO, RAW, SAO/R96R, RAW/R96R, Restricted Overwrite
Reader aliases: /dev/hdb
------------------------------
Wie krieg ich das denn jetzt als User zum Laufen?
Andre
Reply to: