NVIDIA 7300 und Lenny
Hallo Debianer,
ich habe heute ein leichtes dist-upgrade.
nach dem Neustart hatte ich plötzlich aufgeblähte Zeichen.
An meiner originalen xorg.conf hatte ich nichts verändert und auch
xrandr zeigt mir die richtige Auflösung.
Benutzt hatte ich bisher den unfreien Treiber von NVIDIA:
xorg.conf:
etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
# Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
# Load "dbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "Device"
Identifier "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go
7300]"
Driver "nvidia"
BusID "PCI:1:0:0"
Option "NvAGP" "3"
Option "RenderAccel" "true"
Option "XAANoOffscreenPixmaps" "true"
EndSection
Section "Monitor"
Identifier "Standardbildschirm"
# Option "DPMS"
HorizSync 28-84
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go
7300]"
Monitor "Standardbildschirm"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 4
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1280x800"
EndSubSection
Option "AddARGBGLXVisuals" "true"
# Option "AllowSHMPixmaps" "true"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
#Section "DRI"
# Mode 0666
#EndSection
Section "Extensions"
Option "Composite" "true"
EndSection
xrandr:
Screen 0: minimum 320 x 240, current 1680 x 1050, maximum 1680 x 1050
default connected 1680x1050+0+0 0mm x 0mm
1680x1050 50.0*
1600x1024 51.0
1440x900 52.0
1280x1024 53.0
1280x960 54.0
1280x800 55.0
1280x768 56.0
1024x768 57.0
960x600 58.0
840x525 59.0
800x600 60.0 61.0
800x512 62.0
720x450 63.0
640x512 64.0
640x480 65.0 66.0
640x400 67.0
640x384 68.0
512x384 69.0
400x300 70.0
320x240 71.0
---
hat jemand eine Idee, was hier nicht stimmt.
Danke für die Hilfe
Reply to: