[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Problem beim Ändern der Bildschirmauflösung



Hallo,

ich habe gestern ein unerwartetes Problem beim Versuch die Bildschirmauflösung zu ändern
bemerkt. Ich kann wenn ich mit Strg-Alt-KP+ die Bildschirmauflösung von 1152x864 nach
1024x768 oder 800x600 ändern will keine korrekte Darstellung bekommen, stattdessen
ist ein Teil des Bildes an den Rändern abgeschnitten und wenn ich die Maus zum
Bildschirmrand hinbewege verschiebt sich der sichtbare Bildausschnitt.
Tatsächlich passiert das auch bei 1152x864, wenn ich in xorg.conf den Eintrag
"Virtual     1152 864" weglasse, nur 1280x960 wird korrekt dargestellt.
Ich habe versucht mit gtf und xtiming.pl die Modelines zu ändern, aber ohne Erfolg.
Hat jemand eine Idee, woran das liegen könnte? Im Prinzip scheint es ja zu gehen,
wenn ich im Gnome-Control-Center die Bildschirmauflösung ändere, funktioniert es,
ich will aber kein Gnome od. KDE verwenden sondern lieber bei IceWm bleiben :(
Mein Setup: Monitor: 19" Röhrenmonitor Medion MD1998LM
Graka: Nvidia Riva Tnt2
Auszug aus xorg.conf:

Section "Device"
	Identifier	"nVidia Corporation NV5 [RIVA TNT2/TNT2 Pro]"
	Driver		"nv"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
    HorizSync    30.0 - 98.0
    VertRefresh  50.0 - 120.0
    Identifier     "MD1998LM"
    #ModeLine       "1024x480" 65.0 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
    #ModeLine       "768x576" 50.0 768 832 846 1000 576 590 595 630
    #ModeLine       "768x576" 63.1 768 800 960 1024 576 578 590 616
    ModeLine       "1024x768@75" 78.8 1024 1044 1140 1300 768 769 772 800 +hsync +vsync
    ## 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
    ModeLine       "1280x960_75.00"  129.86  1280 1368 1504 1728  960 961 964 1002  -HSync +Vsync
    ## 800x600 @ 75.00 Hz (GTF) hsync: 47.02 kHz; pclk: 48.91 MHz
    ModeLine       "800x600_75.00"  48.91  800 840 920 1040  600 601 604 627  -HSync +Vsync
    ## 1152x864 @ 75.00 Hz (GTF) hsync: 67.65 kHz; pclk: 104.99 MHz
    ModeLine       "1152x864_75.00"  104.99  1152 1224 1352 1552  864 865 868 902  -HSync +Vsync
    ## 1024x768 @ 75.00 Hz (GTF) hsync: 60.15 kHz; pclk: 81.80 MHz
    ModeLine       "1024x768_75.00"  81.80  1024 1080 1192 1360  768 769 772 802  -HSync +Vsync
    Option         "DPMS"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "NVIDIA Corporation NV5 [RIVA TNT2/TNT2 Pro]"
    Monitor        "MD1998LM"
    DefaultDepth    16
    SubSection     "Display"
        Depth       1
        Modes      "1280x960" "1152x864" "1024x768" "800x600"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1280x960" "1152x864" "1024x768" "800x600"
    EndSubSection
    SubSection     "Display"
        Depth       8
        Modes      "1280x960" "1152x864" "1024x768" "800x600"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1280x960" "1152x864" "1024x768" "800x600"
    EndSubSection
    SubSection     "Display"
        Depth       16
        #Modes       "1024x768@75" "1280x960" "1152x864" "1024x768" "800x600"
        Modes      "1152x864_75.00" "1024x768_75.00" "1280x960_75.00" "800x600_75.00" "1024x768_75.00"
        Virtual     1152 864
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1280x960" "1152x864" "1024x768" "800x600"
    EndSubSection
EndSection

Vielen Dank im Voraus

Michael


Reply to: