[OT] Interpretationshilfe smartctl
Hallo alle,
kann mir jemand bei der Interpretation meines "smartctl --all" outputs helfen (siehe unten)?
Grundsätzlich sieht das hier ja ganz gut aus:
//------------------------
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
//------------------------
Unangenehmer sieht das hier aus:
//------------------------
Error 658 occurred at disk power-on lifetime: 390 hours (16 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 e0 f6 81 e2 Error: ICRC, ABRT 1 sectors at LBA = 0x0281f6e0 = 42071776
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 10 d1 f6 81 e2 00 00:36:43.389 READ DMA
c8 00 08 3f 6c 80 e2 00 00:36:42.221 READ DMA
ca 00 80 b7 b0 0f e1 00 00:36:41.504 WRITE DMA
ca 00 80 37 b0 0f e1 00 00:36:41.504 WRITE DMA
c8 00 08 3f 6c 80 e2 00 00:36:41.504 READ DMA
//------------------------
Die Festplatte kommt aus einem Rechner der sporadisch Ausfälle hat. Würdet ihr die Platte weiterverwenden?
Und zum Schluß wenigstens noch was halbwegs Debian spezifisches:
Würde mit der smartd eine Meldung (Mail?) ausgeben? Ich vermute mal nein, da der Test ja ein "passed" anzeigt.
Danke und Gruß,
Patrick
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus family
Device Model: ST94011A
Serial Number: 3KW5L9HT
Firmware Version: 5.11
User Capacity: 40,007,761,920 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Sat Sep 20 16:57:13 2008 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 426) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 31) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 059 057 034 Pre-fail Always - 81541382
3 Spin_Up_Time 0x0003 100 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 258
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 070 060 030 Pre-fail Always - 11055044
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 394
10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 409
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 41
193 Load_Cycle_Count 0x0032 090 090 000 Old_age Always - 20055
194 Temperature_Celsius 0x0022 030 061 000 Old_age Always - 30
195 Hardware_ECC_Recovered 0x001a 059 056 000 Old_age Always - 81541382
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 124 000 Old_age Always - 806
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 658 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 658 occurred at disk power-on lifetime: 390 hours (16 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 e0 f6 81 e2 Error: ICRC, ABRT 1 sectors at LBA = 0x0281f6e0 = 42071776
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 10 d1 f6 81 e2 00 00:36:43.389 READ DMA
c8 00 08 3f 6c 80 e2 00 00:36:42.221 READ DMA
ca 00 80 b7 b0 0f e1 00 00:36:41.504 WRITE DMA
ca 00 80 37 b0 0f e1 00 00:36:41.504 WRITE DMA
c8 00 08 3f 6c 80 e2 00 00:36:41.504 READ DMA
Error 657 occurred at disk power-on lifetime: 390 hours (16 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 46 6c 80 e2 Error: ICRC, ABRT 1 sectors at LBA = 0x02806c46 = 41970758
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 3f 6c 80 e2 00 00:36:43.389 READ DMA
ca 00 80 b7 b0 0f e1 00 00:36:42.221 WRITE DMA
ca 00 80 37 b0 0f e1 00 00:36:41.504 WRITE DMA
c8 00 08 3f 6c 80 e2 00 00:36:41.504 READ DMA
c8 00 08 37 6c 80 e2 00 00:36:41.504 READ DMA
Error 656 occurred at disk power-on lifetime: 390 hours (16 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 46 6c 80 e2 Error: ICRC, ABRT 1 sectors at LBA = 0x02806c46 = 41970758
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 3f 6c 80 e2 00 00:36:41.485 READ DMA
c8 00 08 37 6c 80 e2 00 00:36:41.485 READ DMA
c8 00 08 2f 6c 80 e2 00 00:36:41.504 READ DMA
c8 00 08 77 7d 80 e2 00 00:36:41.504 READ DMA
c8 00 08 27 6c 80 e2 00 00:36:41.504 READ DMA
Error 655 occurred at disk power-on lifetime: 390 hours (16 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 e6 6f 93 e2 Error: ICRC, ABRT 1 sectors at LBA = 0x02936fe6 = 43216870
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 df 6f 93 e2 00 00:34:17.182 READ DMA
ca 00 08 cf 5e 93 e2 00 00:34:06.147 WRITE DMA
ca 00 20 87 76 86 e2 00 00:34:03.476 WRITE DMA
ca 00 80 b7 02 10 e1 00 00:34:03.467 WRITE DMA
ca 00 80 37 02 10 e1 00 00:34:03.467 WRITE DMA
Error 654 occurred at disk power-on lifetime: 390 hours (16 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 e6 6f 93 e2 Error: ICRC, ABRT 1 sectors at LBA = 0x02936fe6 = 43216870
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 df 6f 93 e2 00 00:34:03.437 READ DMA
c8 00 08 77 82 93 e2 00 00:34:03.436 READ DMA
c8 00 08 ff 73 93 e2 00 00:34:03.476 READ DMA
c8 00 08 2f 60 93 e2 00 00:34:03.467 READ DMA
c8 00 08 5f 80 93 e2 00 00:34:03.467 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 393 -
# 2 Short offline Completed without error 00% 391 -
# 3 Extended offline Aborted by host 90% 390 -
# 4 Short offline Completed without error 00% 390 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Reply to: