Re: Laptop + externer Monitor = geht nicht
Danke für die schnelle Antwort. Ich hab' die Vorschläge umgesetzt. Jetzt
hab' ich auf beiden Monitoren ein Signal aber es ist böse.
Ein totaler Mischmasch von Strichen, Linien und Farben der auch nicht
mehr weg will. Weder ein Strg+Alt+F1 noch ein Strg+Alt+Backspace geht.
Das Bild (wenn man's so nennen kann) bleibt hartnäckig auf den
Monitoren. Nur ein Strg+Alt+Entf hilft weiter. So eine Sc...!
Aber jetzt zeigt das Log evtl. was Interessantes. Ich kann's nicht
einschätzen.
Beste Grüße
Goran
Am Dienstag, den 01.04.2008, 19:47 +0200 schrieb Andreas Pakulat:
>
> [snip]
>
> Welche Xorg version?
>
X Window System Version 7.2.0
> > Section "Monitor"
> > Identifier "Dell 2408WFP Flat Panel Monitor"
> > Option "DPMS"
> > # Option "Rotate" "CW"
> > ModeLine "1920x1200" 154.00 1920 1968 2000 2080 1200 1203
> > 1209 1235 -HSync +VSync
>
> Das sollte nicht notwendig sein.
>
Gut, hab' ich auskommentiert.
> [snip]
>
> > Section "ServerLayout"
> > Identifier "Default Layout"
> > Screen 0 "Default Screen"
> > # Screen 1 "External Screen" RightOf "Default Screen"
> > Option "Xinerama" "on"
>
> Die Option ist da falsch am Platz. So ein Twinview setup braucht kein
> Xinerama (und bei Xorg aus unstable willst du auch kein Xinerama, weils
> da XRandR 1.2 Support gibt). Ansonsten sollte das passen, wenn du 2
> Screen Eintraege hast inkl. des RightOf/LeftOf Eintrag.
>
Gut, ist auch geändert.
> Und wo bitte ist das X11 log?
> [snip]
Hier:
[snip]
(II) I810(0): [drm] DRM interface version 1.3
(II) I810(0): [drm] created "i915" driver at busid "pci:0000:00:02.0"
(II) I810(0): [drm] added 8192 byte SAREA at 0xf8dcf000
(II) I810(0): [drm] mapped SAREA 0xf8dcf000 to 0xb7cb9000
(II) I810(0): [drm] framebuffer handle = 0xf0620000
(II) I810(0): [drm] added 1 reserved context for kernel
(II) I810(0): Allocated 32 kB for the logical context at 0x5fd2000.
(II) I810(0): Allocated 8448 kB for the back buffer at 0x4000000.
(II) I810(0): Allocated 8448 kB for the depth buffer at 0x3000000.
(II) I810(0): Allocated 61696 kB for textures at 0xff3c0000
(II) I810(0): 0x81fabb8: Memory at offset 0x00020000, size 6144 kBytes
(II) I810(0): 0x81fab98: Memory at offset 0x00620000, size 13248 kBytes
(II) I810(0): 0x81fbd18: Memory at offset 0x05fff000, size 4 kBytes
(II) I810(0): 0x81fbd40: Memory at offset 0x05ffb000, size 16 kBytes
(II) I810(0): 0x81fbd6c: Memory at offset 0x00000000, size 128 kBytes
(II) I810(0): 0x81fabd8: Memory at offset 0x05fea000, size 64 kBytes
(II) I810(0): 0x81fabf8: Memory at offset 0x05fda000, size 64 kBytes
(II) I810(0): 0x81fbf58: Memory at offset 0x05ffa000, size 4 kBytes
(II) I810(0): 0x81fad70: Memory at offset 0x05fd2000, size 32 kBytes
(II) I810(0): 0x81fad90: Memory at offset 0x04000000, size 8448 kBytes
(II) I810(0): 0x81fadb0: Memory at offset 0x03000000, size 8448 kBytes
(II) I810(0): 0x81fadd0: Memory at offset 0xff3c0000, size 61696 kBytes
(II) I810(0): Activating tiled memory for the back buffer.
(II) I810(0): Activating tiled memory for the depth buffer.
(II) I810(0): [drm] Registers = 0xfaf80000
(II) I810(0): [drm] ring buffer = 0xf0000000
(II) I810(0): [drm] init sarea width,height = 1400 x 1050 (pitch 2048)
(II) I810(0): [drm] Mapping front buffer
(II) I810(0): [drm] Front Buffer = 0x2e0c4000
(II) I810(0): [drm] Back Buffer = 0xf4000000
(II) I810(0): [drm] Depth Buffer = 0xf3000000
(II) I810(0): [drm] textures = 0xef3c0000
(II) I810(0): [drm] Initialized kernel agp heap manager, 63176704
(II) I810(0): [dri] visual configs initialized
(==) I810(0): Write-combining range (0xf0000000,0x8000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(WW) I810(0): Extended BIOS function 0x5f05 failed.
(II) I810(0): xf86BindGARTMemory: bind key 9 at 0x000df000 (pgoffset
223)
(II) I810(0): xf86BindGARTMemory: bind key 0 at 0x05fff000 (pgoffset
24575)
(II) I810(0): xf86BindGARTMemory: bind key 1 at 0x05ffb000 (pgoffset
24571)
(II) I810(0): xf86BindGARTMemory: bind key 3 at 0x05fea000 (pgoffset
24554)
(II) I810(0): xf86BindGARTMemory: bind key 4 at 0x05fda000 (pgoffset
24538)
(II) I810(0): xf86BindGARTMemory: bind key 2 at 0x05ffa000 (pgoffset
24570)
(II) I810(0): xf86BindGARTMemory: bind key 5 at 0x05fd2000 (pgoffset
24530)
(II) I810(0): xf86BindGARTMemory: bind key 6 at 0x04000000 (pgoffset
16384)
(II) I810(0): xf86BindGARTMemory: bind key 7 at 0x03000000 (pgoffset
12288)
(II) I810(0): xf86BindGARTMemory: bind key 8 at 0xff3c0000 (pgoffset
1045440)
(WW) I810(0): xf86BindGARTMemory: binding of gart memory with key 8
at offset 0xff3c0000 failed (Invalid argument)
Fatal server error:
AddScreen/ScreenInit failed for driver 0
Und hier nochmal die geänderte xorg.conf:
[snip]
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
[snip]
Section "Device"
Identifier "Intel 82852/855GM Interface 0"
Driver "i810"
BusID "PCI:0:2:0"
Screen 0
Option "MonitorLayout" "DFP,LFP"
EndSection
Section "Device"
Identifier "Intel 82852/855GM Interface 1"
Driver "i810"
BusID "PCI:0:2:0"
Screen 1
Option "MonitorLayout" "DFP,LFP"
EndSection
Section "Monitor"
Identifier "Samsung LTN150PG-L02 Flat Panel Monitor"
Option "DPMS"
HorizSync 28-70
VertRefresh 43-60
EndSection
Section "Monitor"
Identifier "Dell 2408WFP Flat Panel Monitor"
Option "DPMS"
HorizSync 30-83
VertRefresh 56-76
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel 82852/855GM Interface 0"
Monitor "Samsung LTN150PG-L02 Flat Panel Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1400x1050"
EndSubSection
EndSection
Section "Screen"
Identifier "External Screen"
Device "Intel 82852/855GM Interface 1"
Monitor "Dell 2408WFP Flat Panel Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1200"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Default Screen"
Screen 1 "External Screen" RightOf "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection
Reply to: