Re: Probleme mit CD-Brennen mit selbstgebasteltem Kernel
Andrei Popescu wrote:
> On Tue, Oct 23, 2007 at 12:11:45AM +0200, Roberto Nicolini wrote:
>> Hallo an Alle.
>>
>> Ich habe ein Problem mit einem sata Brenner mit einem selbstkompiliertem
>> Kernel.
>>
>> Mit dem standard Kernel läuft alles wie es sollte, und ich kann
>> problemlos CDs Brennen. Mit meinem Kernel bekomme ich von K3B folgende
>> Fehlermeldung:
>>
>> "cdrecord returned an unknown error (code 255)"
>>
>> Soweit ich herausfinden konnte, sollte es sich um ein Problem von Rechten
>> handeln. Aber, da wo das Problem nur mit meinem Kernel auftritt, muss ich
>> irgendeine Option vergessen haben. Nachdem ich überprüft habe, dass
>> scsi-unterstützung da ist, weiss ich nicht mehr, woran es liegen könnte.
>> Hat jemand eine Ahnung?
>>
>> Ich füge hinzu die relevante Teile der .config Datei.
>
> Ein diff mit der standard Config waehre vllt hilfreicher.
>
> Gruesse,
> Andrei
Danke für den Hinweis.
Inzwieschen habe ich geprüft, wenn ich versuche den Devive zu mounten dauert
es länger als mit dem standard Kernel und ich bekommen den Output:
sietchtabr:/home/shaihulud# mount /dev/scd0 /media/cdrom1
mount: block device /dev/scd0 is write-protected, mounting read-only
Hier ist der Diff. Was direkt die Brenner-Konfiugration betreffen kann, habe
ich das Paket-Writing von meinem KErnel weggelassen. Ansonsten habe ich
nach wie vor keine Ahnung.
Danke für jede Hilfe!
diff --ignore-blank-lines /boot/config-2.6.18-5-amd64 /boot/config-2.6.18-roberto:
3,4c3,4
< # Linux kernel version: 2.6.18
< # Tue Oct 2 20:32:40 2007
---
> # Linux kernel version: 2.6.18-roberto
> # Mon Oct 22 07:39:53 2007
45,47c45,46
< #
< # DCCP CCIDs Configuration (EXPERIMENTAL)
< #
< CONFIG_IP_DCCP_CCID2=m
< CONFIG_IP_DCCP_CCID3=m
< CONFIG_IP_DCCP_TFRC_LIB=m
<
< #
< # DCCP Kernel Hacking
< #
< # CONFIG_IP_DCCP_DEBUG is not set
---
< # CONFIG_DEBUG_DRIVER is not set
825,940c553
< CONFIG_MTD=m
< # CONFIG_MTD_DEBUG is not set
< CONFIG_MTD_CONCAT=m
< CONFIG_MTD_PARTITIONS=y
< CONFIG_MTD_REDBOOT_PARTS=m
< CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
< # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
< # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
< # CONFIG_MTD_CMDLINE_PARTS is not set
<
< #
< # User Modules And Translation Layers
< #
< CONFIG_MTD_CHAR=m
< CONFIG_MTD_BLOCK=m
< CONFIG_MTD_BLOCK_RO=m
< CONFIG_FTL=m
< CONFIG_NFTL=m
< CONFIG_NFTL_RW=y
< CONFIG_INFTL=m
< CONFIG_RFD_FTL=m
> # CONFIG_MTD is not set
947c560
< CONFIG_PARPORT_SERIAL=m
---
> # CONFIG_PARPORT_SERIAL is not set
950d562
< CONFIG_PARPORT_PC_PCMCIA=m
953,954c565,566
< CONFIG_PARPORT_AX88796=m
< CONFIG_PARPORT_1284=y
---
> # CONFIG_PARPORT_AX88796 is not set
> # CONFIG_PARPORT_1284 is not set
971,1005c583,587
< CONFIG_PARIDE=m
< CONFIG_PARIDE_PARPORT=m
<
< #
< # Parallel IDE high-level drivers
< #
< CONFIG_PARIDE_PD=m
< CONFIG_PARIDE_PCD=m
< CONFIG_PARIDE_PF=m
< CONFIG_PARIDE_PT=m
< CONFIG_PARIDE_PG=m
<
< #
< # Parallel IDE protocol modules
< #
< CONFIG_PARIDE_ATEN=m
< CONFIG_PARIDE_BPCK=m
< CONFIG_PARIDE_COMM=m
< CONFIG_PARIDE_DSTR=m
< CONFIG_PARIDE_FIT2=m
< CONFIG_PARIDE_FIT3=m
< CONFIG_PARIDE_EPAT=m
< # CONFIG_PARIDE_EPATC8 is not set
< CONFIG_PARIDE_EPIA=m
< CONFIG_PARIDE_FRIQ=m
< CONFIG_PARIDE_FRPW=m
< CONFIG_PARIDE_KBIC=m
< CONFIG_PARIDE_KTTI=m
< CONFIG_PARIDE_ON20=m
< CONFIG_PARIDE_ON26=m
< CONFIG_BLK_CPQ_DA=m
< CONFIG_BLK_CPQ_CISS_DA=m
< CONFIG_CISS_SCSI_TAPE=y
< CONFIG_BLK_DEV_DAC960=m
< CONFIG_BLK_DEV_UMEM=m
---
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
1009c591
< CONFIG_BLK_DEV_NBD=m
---
> # CONFIG_BLK_DEV_NBD is not set
1012,1020c594,597
< CONFIG_BLK_DEV_RAM=y
< CONFIG_BLK_DEV_RAM_COUNT=16
< CONFIG_BLK_DEV_RAM_SIZE=65536
< CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
< CONFIG_BLK_DEV_INITRD=y
< CONFIG_CDROM_PKTCDVD=m
< CONFIG_CDROM_PKTCDVD_BUFFERS=8
< # CONFIG_CDROM_PKTCDVD_WCACHE is not set
< CONFIG_ATA_OVER_ETH=m
---
> # CONFIG_BLK_DEV_RAM is not set
> # CONFIG_BLK_DEV_INITRD is not set
> # CONFIG_CDROM_PKTCDVD is not set
> # CONFIG_ATA_OVER_ETH is not set
1035d611
< CONFIG_BLK_DEV_IDECS=m
1037c613
< CONFIG_BLK_DEV_IDETAPE=m
---
> # CONFIG_BLK_DEV_IDETAPE is not set
1046,1047c622
< CONFIG_BLK_DEV_CMD640=y
< # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
---
> # CONFIG_BLK_DEV_CMD640 is not set
1053,1054c628,629
< CONFIG_BLK_DEV_OPTI621=m
< CONFIG_BLK_DEV_RZ1000=m
---
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
1059,1061c634,635
< CONFIG_BLK_DEV_AEC62XX=m
< CONFIG_BLK_DEV_ALI15X3=m
< # CONFIG_WDC_ALI15X3 is not set
---
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
1063,1085c637,657
< CONFIG_BLK_DEV_ATIIXP=m
< CONFIG_BLK_DEV_CMD64X=m
< CONFIG_BLK_DEV_TRIFLEX=m
< CONFIG_BLK_DEV_CY82C693=m
< CONFIG_BLK_DEV_CS5520=m
< CONFIG_BLK_DEV_CS5530=m
< CONFIG_BLK_DEV_HPT34X=m
< # CONFIG_HPT34X_AUTODMA is not set
< CONFIG_BLK_DEV_HPT366=m
< CONFIG_BLK_DEV_JMICRON=m
< CONFIG_BLK_DEV_SC1200=m
< CONFIG_BLK_DEV_PIIX=m
< CONFIG_BLK_DEV_IT821X=m
< CONFIG_BLK_DEV_NS87415=m
< CONFIG_BLK_DEV_PDC202XX_OLD=m
< CONFIG_PDC202XX_BURST=y
< CONFIG_BLK_DEV_PDC202XX_NEW=m
< CONFIG_BLK_DEV_SVWKS=m
< CONFIG_BLK_DEV_SIIMAGE=m
< CONFIG_BLK_DEV_SIS5513=m
< CONFIG_BLK_DEV_SLC90E66=m
< CONFIG_BLK_DEV_TRM290=m
< CONFIG_BLK_DEV_VIA82CXXX=m
---
> # CONFIG_BLK_DEV_ATIIXP is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_JMICRON is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> # CONFIG_BLK_DEV_PIIX is not set
> # CONFIG_BLK_DEV_IT821X is not set
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
1095,1096c667,668
< CONFIG_RAID_ATTRS=m
< CONFIG_SCSI=m
---
> # CONFIG_RAID_ATTRS is not set
> CONFIG_SCSI=y
1102,1104c674,676
< CONFIG_BLK_DEV_SD=m
< CONFIG_CHR_DEV_ST=m
< CONFIG_CHR_DEV_OSST=m
---
> CONFIG_BLK_DEV_SD=y
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
1107,1108c679,680
< CONFIG_CHR_DEV_SG=m
< CONFIG_CHR_DEV_SCH=m
---
> # CONFIG_CHR_DEV_SG is not set
> # CONFIG_CHR_DEV_SCH is not set
1128,1206c700,746
< CONFIG_ISCSI_TCP=m
< CONFIG_BLK_DEV_3W_XXXX_RAID=m
< CONFIG_SCSI_3W_9XXX=m
< CONFIG_SCSI_ACARD=m
< CONFIG_SCSI_AACRAID=m
< CONFIG_SCSI_AIC7XXX=m
< CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
< CONFIG_AIC7XXX_RESET_DELAY_MS=15000
< CONFIG_AIC7XXX_DEBUG_ENABLE=y
< CONFIG_AIC7XXX_DEBUG_MASK=0
< CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
< CONFIG_SCSI_AIC7XXX_OLD=m
< CONFIG_SCSI_AIC79XX=m
< CONFIG_AIC79XX_CMDS_PER_DEVICE=32
< CONFIG_AIC79XX_RESET_DELAY_MS=15000
< CONFIG_AIC79XX_ENABLE_RD_STRM=y
< CONFIG_AIC79XX_DEBUG_ENABLE=y
< CONFIG_AIC79XX_DEBUG_MASK=0
< CONFIG_AIC79XX_REG_PRETTY_PRINT=y
< CONFIG_SCSI_ARCMSR=m
< CONFIG_MEGARAID_NEWGEN=y
< CONFIG_MEGARAID_MM=m
< CONFIG_MEGARAID_MAILBOX=m
< CONFIG_MEGARAID_LEGACY=m
< CONFIG_MEGARAID_SAS=m
< CONFIG_SCSI_SATA=m
< CONFIG_SCSI_SATA_AHCI=m
< CONFIG_SCSI_SATA_SVW=m
< CONFIG_SCSI_ATA_PIIX=m
< CONFIG_SCSI_SATA_MV=m
< CONFIG_SCSI_SATA_NV=m
< CONFIG_SCSI_PDC_ADMA=m
< CONFIG_SCSI_HPTIOP=m
< CONFIG_SCSI_SATA_QSTOR=m
< CONFIG_SCSI_SATA_PROMISE=m
< CONFIG_SCSI_SATA_SX4=m
< CONFIG_SCSI_SATA_SIL=m
< CONFIG_SCSI_SATA_SIL24=m
< CONFIG_SCSI_SATA_SIS=m
< CONFIG_SCSI_SATA_ULI=m
< CONFIG_SCSI_SATA_VIA=m
< CONFIG_SCSI_SATA_VITESSE=m
< CONFIG_SCSI_BUSLOGIC=m
< # CONFIG_SCSI_OMIT_FLASHPOINT is not set
< CONFIG_SCSI_DMX3191D=m
< CONFIG_SCSI_EATA=m
< CONFIG_SCSI_EATA_TAGGED_QUEUE=y
< CONFIG_SCSI_EATA_LINKED_COMMANDS=y
< CONFIG_SCSI_EATA_MAX_TAGS=16
< CONFIG_SCSI_FUTURE_DOMAIN=m
< CONFIG_SCSI_GDTH=m
< CONFIG_SCSI_IPS=m
< CONFIG_SCSI_INITIO=m
< CONFIG_SCSI_INIA100=m
< CONFIG_SCSI_PPA=m
< CONFIG_SCSI_IMM=m
< # CONFIG_SCSI_IZIP_EPP16 is not set
< # CONFIG_SCSI_IZIP_SLOW_CTR is not set
< CONFIG_SCSI_SYM53C8XX_2=m
< CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
< CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
< CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
< CONFIG_SCSI_SYM53C8XX_MMIO=y
< CONFIG_SCSI_IPR=m
< # CONFIG_SCSI_IPR_TRACE is not set
< # CONFIG_SCSI_IPR_DUMP is not set
< CONFIG_SCSI_QLOGIC_1280=m
< CONFIG_SCSI_QLA_FC=m
< CONFIG_SCSI_LPFC=m
< CONFIG_SCSI_DC395x=m
< CONFIG_SCSI_DC390T=m
< CONFIG_SCSI_DEBUG=m
<
< #
< # PCMCIA SCSI adapter support
< #
< CONFIG_PCMCIA_FDOMAIN=m
< CONFIG_PCMCIA_QLOGIC=m
< CONFIG_PCMCIA_SYM53C500=m
---
> # CONFIG_ISCSI_TCP is not set
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_3W_9XXX is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AACRAID is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_SCSI_ARCMSR is not set
> # CONFIG_MEGARAID_NEWGEN is not set
> # CONFIG_MEGARAID_LEGACY is not set
> # CONFIG_MEGARAID_SAS is not set
> CONFIG_SCSI_SATA=y
> # CONFIG_SCSI_SATA_AHCI is not set
> # CONFIG_SCSI_SATA_SVW is not set
> # CONFIG_SCSI_ATA_PIIX is not set
> # CONFIG_SCSI_SATA_MV is not set
> CONFIG_SCSI_SATA_NV=y
> # CONFIG_SCSI_PDC_ADMA is not set
> # CONFIG_SCSI_HPTIOP is not set
> # CONFIG_SCSI_SATA_QSTOR is not set
> # CONFIG_SCSI_SATA_PROMISE is not set
> # CONFIG_SCSI_SATA_SX4 is not set
> # CONFIG_SCSI_SATA_SIL is not set
> # CONFIG_SCSI_SATA_SIL24 is not set
> # CONFIG_SCSI_SATA_SIS is not set
> # CONFIG_SCSI_SATA_ULI is not set
> # CONFIG_SCSI_SATA_VIA is not set
> # CONFIG_SCSI_SATA_VITESSE is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_PPA is not set
> # CONFIG_SCSI_IMM is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_IPR is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_QLA_FC is not set
> # CONFIG_SCSI_LPFC is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_DEBUG is not set
1211,1227c751
< CONFIG_MD=y
< CONFIG_BLK_DEV_MD=m
< CONFIG_MD_LINEAR=m
< CONFIG_MD_RAID0=m
< CONFIG_MD_RAID1=m
< CONFIG_MD_RAID10=m
< CONFIG_MD_RAID456=m
< CONFIG_MD_RAID5_RESHAPE=y
< CONFIG_MD_MULTIPATH=m
< CONFIG_MD_FAULTY=m
< CONFIG_BLK_DEV_DM=m
< CONFIG_DM_CRYPT=m
< CONFIG_DM_SNAPSHOT=m
< CONFIG_DM_MIRROR=m
< CONFIG_DM_ZERO=m
< CONFIG_DM_MULTIPATH=m
< CONFIG_DM_MULTIPATH_EMC=m
---
> # CONFIG_MD is not set
1232,1238c756,759
< CONFIG_FUSION=y
< CONFIG_FUSION_SPI=m
< CONFIG_FUSION_FC=m
< CONFIG_FUSION_SAS=m
< CONFIG_FUSION_MAX_SGE=40
< CONFIG_FUSION_CTL=m
< CONFIG_FUSION_LAN=m
---
> # CONFIG_FUSION is not set
> # CONFIG_FUSION_SPI is not set
> # CONFIG_FUSION_FC is not set
> # CONFIG_FUSION_SAS is not set
1243,1267c764
< CONFIG_RTC_DRV_MAX6902=m
< CONFIG_RTC_DRV_V3020=m
---
> # CONFIG_RTC_DRV_MAX6902 is not set
> # CONFIG_RTC_DRV_V3020 is not set
2908c1621
< CONFIG_INTEL_IOATDMA=m
---
> # CONFIG_INTEL_IOATDMA is not set
2920c1633
Reply to: