X-Server und alte S3 Karte im 486DX
Hallo liebe Debian Gemeinde,
zur Zeit versuche ich gerade einen alten 486dx mit Vesa Local Bus zu
reaktivieren.
Die Installation hat soweit funktioniert, System ist
Debian Testing, von 20061127 auf DVD gebrannt, nicht ganz aktuell,
aber ich kann hier auch
nicht so einfach upgraden mangels schneller Internetverbindung.
Beim Aufsetzen eines kleinen X11 Systems habe ich nun das Problem:
Graphik Karte ist:
Phoenix S3 86C805i VL BUS Enhanced VGA BIOS. Version 2.13.01E06
miroCRYSTAL 16SI VL Rev1.1
Diese lief früher (ca. vor 6 Jahren unter Xfree 3.x) ohne Probleme.
Sollte also eigentlich der s3 Treiber sein, aber beim Aufruf von startx
startet der X-Server nicht:
Auszug aus der /var/log/Xorg.0.log:
....
....
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) S3: driver (version 0.4.1 for S3 chipset: 964-0, 964-1, 968,
Trio32/64, Aurora64V+, Trio64UV+, Trio64V2/DX/GX
(II) Primary Device is: ISA
Backtrace:
0: /usr/bin/X11/X(xf86SigHandler+0x84) [0x80c4354]
1: [0xffffe420]
2: /usr/lib/xorg/modules/drivers/s3_drv.so [0xa7ce9244]
3: /usr/bin/X11/X(InitOutput+0x6d4) [0x80a0204]
4: /usr/bin/X11/X(main+0x276) [0x806e486]
5: /lib/tls/libc.so.6(__libc_start_main+0xc8) [0xa7debea8]
6: /usr/bin/X11/X(FontFileCompleteXLFD+0xa9) [0x806d9d1]
Fatal server error:
Caught signal 11. Server aborting
-----------------------------------------------
OK, vielleicht passt der s3 Treiber nicht mehr für die Karte,
also einmal den vesa Treiber probiert, aber auch hier startet
der X-Server nicht.
Auszug aus der /var/log/Xorg.0.log:
......
......
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 1.2
(II) VESA(0): VESA VBE Total Mem: 2048 kB
(II) VESA(0): VESA VBE OEM: S3 Incorporated. 86C801/805
(II) VESA(0): virtual address = 0xa7bb4000,
physical address = 0xa0000, size = 65536
(II) VESA(0): VBESetVBEMode failed...Tried again without customized values.
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
Backtrace:
0: /usr/bin/X11/X(xf86SigHandler+0x84) [0x80c4354]
1: [0xffffe420]
2: /usr/lib/xorg/modules/libfb.so(fbFill+0x3ce) [0xa7be296e]
3: /usr/lib/xorg/modules/libfb.so(fbPolyFillRect+0x1cd) [0xa7be2c0d]
4: /usr/bin/X11/X [0x8154c94]
5: /usr/bin/X11/X(CreateDefaultStipple+0x108) [0x8095f48]
6: /usr/bin/X11/X(main+0x325) [0x806e535]
7: /lib/tls/libc.so.6(__libc_start_main+0xc8) [0xa7db1ea8]
8: /usr/bin/X11/X(FontFileCompleteXLFD+0xa9) [0x806d9d1]
Fatal server error:
Caught signal 4. Server aborting
-----------------------------------
Selbst der vga Treiber tut es nicht, spare mir mal die Logs,
sehen am Schluss praktisch identisch aus.
Kernel ist
linux-image-2.6.17-2-486 (Version: 2.6.17-9)
und der X-Server:
xserver-xorg (Version: 7.1.0-7)
Kann es sein, dass der X-Server nicht mehr mit 468
oder Vesa Local Bus zurechtkommt? Braucht man
ggf. ein spezielles Modul vom Kernel?
Hier noch die xorg.conf:
-------------------------
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
# Load "dri"
Load "extmod"
Load "freetype"
# Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
EndSection
Section "Device"
Identifier "miroCRYSTAL 16SI VL Phoenix S3 86C805i VL BUS"
Driver "vesa"
EndSection
Section "Monitor"
Identifier "V-1280-15L"
# Option "DPMS"
HorizSync 28-38
VertRefresh 43-72
EndSection
Section "Screen"
Identifier "Default Screen"
Device "miroCRYSTAL 16SI VL Phoenix S3 86C805i VL BUS"
Monitor "V-1280-15L"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
-------------------------------------------------------
Viele Grüße
Carsten
Reply to: