Dirk Schleicher <dirk.schleicher@gmx.de> (Di 19 Dez 2006 21:39:40 CET): > Hallo Leute, > > ich habe eine neue SATA HD. Die habe ich ins System gehängt. > Syslog gibt dies aus: > > Dec 19 19:48:41 pinguinstall kernel: libata version 2.00 loaded. > Dec 19 19:48:41 pinguinstall kernel: sata_via 0000:00:0f.0: version 2.0 > Dec 19 19:48:41 pinguinstall kernel: sata_via 0000:00:0f.0: routed to hard irq line 9 > Dec 19 19:48:41 pinguinstall kernel: ata1: SATA max UDMA/133 cmd 0x3430 ctl 0x3426 bmdma 0x3400 irq 201 > Dec 19 19:48:41 pinguinstall kernel: ata2: SATA max UDMA/133 cmd 0x3428 ctl 0x3422 bmdma 0x3408 irq 201 > Dec 19 19:48:41 pinguinstall kernel: scsi0 : sata_via > Dec 19 19:48:41 pinguinstall kernel: hdb:<6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > Dec 19 19:48:41 pinguinstall kernel: ata1.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 0/32) > Dec 19 19:48:41 pinguinstall kernel: ata1.00: ata1: dev 0 multi count 16 > Dec 19 19:48:41 pinguinstall kernel: ata1.00: configured for UDMA/133 > Dec 19 19:48:41 pinguinstall kernel: scsi1 : sata_via > Dec 19 19:48:41 pinguinstall kernel: ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) > > Die HD ist noch nicht formatiert. Ich dachte, das könnte ich mit > GParted erledigen. Leider zeigt mir das nichts an. > Wie mache ich das am besten? Wie partitioniere und formatiere ich die > HD am besten? "sfdisk -l" könnte Dir die vorhandenen Platten anzeigen. Ich tippe auf /dev/sda. Dann kannst Du z.B. "cfdisk" oder "fdisk" nehmen zum Partitionieren. Und anschließend mit "mkfs" und den Optionen je nach Filesystem (oder gleich z.B. "mke2fs -j ..."). -- Heiko
Attachment:
signature.asc
Description: Digital signature