Re: Kann nur als Root brennen
Hallo zusammen,
> Und wie genau aeussert sich jetzt Dein Problem?
Hier mal der Output bei K3B:
-----%<-----
System
-----------------------
K3b Version: 0.12.17
KDE Version: 3.5.5
QT Version: 3.3.7
Kernel: 2.6.18-2-k7
Devices
-----------------------
HL-DT-ST DVD+-RW GWA4040N B107 (/dev/hdc, ) at /media/cdrom0 [CD-R;
CD-RW; CD-Rom; DVD-Rom; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-Rom; DVD-R
Sequentiell; DVD-RW Eingeschränktes Überbrennen; DVD-RW Sequentiell;
DVD+RW; DVD+R; CD-Rom; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R;
RAW/R16; RAW/R96P; RAW/R96R; Eingeschränktes Überschreiben]
K3b
-----------------------
Size of filesystem calculated: 357879
Used versions
-----------------------
cdrecord: 1.0pre1
cdrecord
-----------------------
This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any
way, don't refer to it as "cdrecord". Send problem reports to
debburn-devel@lists.alioth.debian.org, don't bother Joerg Schilling with any
problems caused by this application.
Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling
WARNING WARNING WARNING:
If you are annoyed by the messages below about unofficial status or about
non-Schily-Makefilesystem or if your GUI/script breaks because of them,
please don't send your complaints to cdrkit maintainers; they already know.
They are not allowed to remove them by Joerg Schilling's license
modifications (restrictions), hidden in the source. Correcting the contents
of the messages is forbidden as well, so don't believe everything said
there.
See
http://svn.debian.org/wsvn/debburn/nonameyet/trunk/FAQ?op=file&rev=0&sc=0
for details.
/usr/bin/X11/wodim: Operation not permitted. WARNING: Cannot set
RR-scheduler
/usr/bin/X11/wodim: Permission denied. WARNING: Cannot set priority
using setpriority().
/usr/bin/X11/wodim: WARNING: This causes a high risk for buffer underruns.
scsidev: 'ATAPI:/dev/hdc'
devname: 'ATAPI:/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: This version of libscg has not been configured via the standard
autoconfiguration method of the Schily makefile system. There is a high risk
that the code is not configured correctly and for this reason will not
behave
as expected.
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Warning: Cannot gain SYS_RAWIO capability: Operation not permitted
Possible reason: wodim not installed SUID root.
/usr/bin/X11/wodim: Warning: using inofficial version of libscg (debburn
project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright
1988,1995,2000-2004 J. Schilling').
/usr/bin/X11/wodim: Warning: using inofficial libscg transport code
version (cdrkit-team-scsi-linux-ata.c-1.7 '@(#)scsi-linux-ata.c 1.7
04/06/12 Copyright 2002 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 1.0pre1
(HOST_CPU-just-a-fake-string-to-make-Schilling's-invariant-section-compile-because-cdrkit-does-not-need-it-anymore-HOST_VENDOR-just-a-fake-string-to-make-Schilling's-invariant-section-compile-because-cdrkit-does-not-need-it-anymore-Linux)
Copyright (C) 1995-2006 Jörg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of
cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to
<debburn-devel@lists.alioth.debian.org>.
The original author should not be bothered with problems of this
version.
Warning: This version of cdrecord has not been configured via the standard
autoconfiguration method of the Schily makefile system. There is a high risk
that the code is not configured correctly and for this reason will not
behave
as expected.
TOC Type: 1 = CD-ROM
Using libscg version 'debburn project-0.8ubuntu1+debburn1'.
Driveropts: 'burnproof'
atapi: 1
Device type : Removable CD-ROM
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVD+-RW GWA4040N'
Revision : 'B107'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x001B
Profile: 0x001A
Profile: 0x0014
Profile: 0x0013
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes:
Drive buf size : 1308672 = 1278 KB
Drive DMA Speed: 104051 kB/s 591x CD 75x DVD
FIFO size : 4194304 = 4096 KB
/usr/bin/X11/wodim: Drive does not support SAO recording.
/usr/bin/X11/wodim: Illegal write mode for this drive.
cdrecord command:
-----------------------
/usr/bin/X11/wodim -v gracetime=2 dev=ATAPI:/dev/hdc speed=16 -dao
driveropts=burnproof -eject -overburn -data -tsize=357879s -
mkisofs
-----------------------
357879
I: -input-charset not specified, using ISO-8859-1 (detected in locale
settings)
mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid JLF - echte Freunde finden
-volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE
K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1
-volset-seqno 1 -sort /tmp/kde-tobias/k3bWLMntc.tmp -rational-rock
-hide-list /tmp/kde-tobias/k3br4TpWa.tmp -joliet -hide-joliet-list
/tmp/kde-tobias/k3bJGbRsa.tmp -full-iso9660-filenames -iso-level 2
-path-list /tmp/kde-tobias/k3bdwbg8a.tmp
-----%<-----
> Benutzt Du udev?
Ja.
Grüßle, Tobias
Reply to: