Re: ich kann nichts brennen (heul)
Hallo,
also um dein Problem mal reproduzieren zu können hab ich mal wodim installiert, hab irgendwie das Gefühl, dass es mich nicht mag ....
Der Brennvorgang lief aber Reibungslos, obwohl ich ebenfalls einen billigen Brenner habe.
MFG
Martin
root@debian:~# aptitude install wodim
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut... Fertig
Lese erweiterte Statusinformationen
Initialisiere Paketstatus... Fertig
Schreibe erweiterte Statusinformationen... Fertig
Lese Task-Beschreibungen... Fertig
Erzeuge Tag-Datenbank... Fertig
Die folgenden Pakete werden nicht verwendet und werden ENTFERNT:
bsh fastjar
gcc-3.4-base gcj-4.1 gcj-4.1-base gij-4.1 java-common
java-gcj-compat lapack3 libaudio2 libflac7 libg2c0 libgcj-bc
libgcj-common libgcj7-0 libgcj7-awt libgcj7-dev libgcj7-jar libgcj7-src
libhsqldb-java libicu34
libjaxp1.2-java libjline-java libmdbtools
libneon25 libnspr4-0d libnss3-0d libportaudio0 libservlet2.3-java
libsndfile1 libstlport4.6c2 libufsparse libwpd8c2a libxalan2-java
libxerces2-java libxmlsec1 libxmlsec1-nss libxmlsec1-openssl libxt-java
openoffice.org-common openoffice.org-java-common
openoffice.org-l10n-en-us refblas3 zlib1g-dev
Die folgenden NEUEN Pakete werden zusätzlich automatisch installiert:
mkisofs
Die folgenden Pakete werden zurückgehalten:
linux-image-2.6-486
Die folgenden NEUEN Pakete werden zusätzlich installiert:
mkisofs wodim
0 Pakete aktualisiert, 2 zusätzlich installiert, 44 werden entfernt und 1 nicht aktualisiert.
----
root@debian:~# wodim dev=/dev/hdc /home/martin/
Display all 110 possibilities? (y or n)
root@debian:~# wodim dev=/dev/hdc /home/martin/ubuntu-6.06.1-alternate-i386.iso
This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any
way, don't refer to it as "cdrecord". Send problem reports to
debburn-devel@lists.alioth.debian.org, don't bother Joerg Schilling with any
problems caused by this application.
Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
Warning: This version of libscg has not been configured via the standard
autoconfiguration method of the Schily makefile system. There is a high risk
that the code is not configured correctly and for this reason will not behave
as expected.
wodim: Warning: using inofficial version of libscg (debburn project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
wodim: Warning: using inofficial libscg transport code version (
cdrkit-team-scsi-linux-sg.c-1.86 '@(#)scsi-linux-sg.c 1.86 05/11/22 Copyright 1997 J. Schilling').
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'LITE-ON '
Identifikation : 'DVDRW SOHW-1653S'
Revision : 'CS09'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
wodim: Success. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
wodim: No disk / Wrong disk!
root@debian
:~# wodim dev=/dev/hdc /home/martin/cronix2.iso
This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any
way, don't refer to it as "cdrecord". Send problem reports to
debburn-devel@lists.alioth.debian.org, don't bother Joerg Schilling with any
problems caused by this application.
Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
Warning: This version of libscg has not been configured via the standard
autoconfiguration method of the Schily makefile system. There is a high risk
that the code is not configured correctly and for this reason will not behave
as expected.
Error trying to open /dev/hdc exclusively (Device or resource busy)... retrying in 1 second.
wodim: Warning: using inofficial version of libscg (debburn
project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
wodim: Warning: using inofficial libscg transport code version (cdrkit-team-scsi-linux-sg.c-1.86 '@(#)scsi-
linux-sg.c 1.86 05/11/22 Copyright 1997 J. Schilling').
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'LITE-ON '
Identifikation : 'DVDRW SOHW-1653S'
Revision : 'CS09'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Speed set to 8467 KB/s
Starting to write CD/DVD at speed 48.0 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
trackno=0
Turning BURN-Free off
Track 01: Total bytes read/written: 726235136/726235136 (354607 sectors).
Reply to: